1 /** 2 * \file 3 * 4 * Copyright (c) 2015 Atmel Corporation. All rights reserved. 5 * 6 * \asf_license_start 7 * 8 * \page License 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions are met: 12 * 13 * 1. Redistributions of source code must retain the above copyright notice, 14 * this list of conditions and the following disclaimer. 15 * 16 * 2. Redistributions in binary form must reproduce the above copyright notice, 17 * this list of conditions and the following disclaimer in the documentation 18 * and/or other materials provided with the distribution. 19 * 20 * 3. The name of Atmel may not be used to endorse or promote products derived 21 * from this software without specific prior written permission. 22 * 23 * 4. This software may only be redistributed and used in connection with an 24 * Atmel microcontroller product. 25 * 26 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED 27 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 28 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE 29 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR 30 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 31 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 32 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 33 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 34 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 35 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36 * POSSIBILITY OF SUCH DAMAGE. 37 * 38 * \asf_license_stop 39 * 40 */ 41 /* 42 * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> 43 */ 44 45 #ifndef _SAMV71_TC2_INSTANCE_ 46 #define _SAMV71_TC2_INSTANCE_ 47 48 /* ========== Register definition for TC2 peripheral ========== */ 49 #if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) 50 #define REG_TC2_CCR0 (0x40014000U) /**< \brief (TC2) Channel Control Register (channel = 0) */ 51 #define REG_TC2_CMR0 (0x40014004U) /**< \brief (TC2) Channel Mode Register (channel = 0) */ 52 #define REG_TC2_SMMR0 (0x40014008U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 0) */ 53 #define REG_TC2_RAB0 (0x4001400CU) /**< \brief (TC2) Register AB (channel = 0) */ 54 #define REG_TC2_CV0 (0x40014010U) /**< \brief (TC2) Counter Value (channel = 0) */ 55 #define REG_TC2_RA0 (0x40014014U) /**< \brief (TC2) Register A (channel = 0) */ 56 #define REG_TC2_RB0 (0x40014018U) /**< \brief (TC2) Register B (channel = 0) */ 57 #define REG_TC2_RC0 (0x4001401CU) /**< \brief (TC2) Register C (channel = 0) */ 58 #define REG_TC2_SR0 (0x40014020U) /**< \brief (TC2) Status Register (channel = 0) */ 59 #define REG_TC2_IER0 (0x40014024U) /**< \brief (TC2) Interrupt Enable Register (channel = 0) */ 60 #define REG_TC2_IDR0 (0x40014028U) /**< \brief (TC2) Interrupt Disable Register (channel = 0) */ 61 #define REG_TC2_IMR0 (0x4001402CU) /**< \brief (TC2) Interrupt Mask Register (channel = 0) */ 62 #define REG_TC2_EMR0 (0x40014030U) /**< \brief (TC2) Extended Mode Register (channel = 0) */ 63 #define REG_TC2_CCR1 (0x40014040U) /**< \brief (TC2) Channel Control Register (channel = 1) */ 64 #define REG_TC2_CMR1 (0x40014044U) /**< \brief (TC2) Channel Mode Register (channel = 1) */ 65 #define REG_TC2_SMMR1 (0x40014048U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 1) */ 66 #define REG_TC2_RAB1 (0x4001404CU) /**< \brief (TC2) Register AB (channel = 1) */ 67 #define REG_TC2_CV1 (0x40014050U) /**< \brief (TC2) Counter Value (channel = 1) */ 68 #define REG_TC2_RA1 (0x40014054U) /**< \brief (TC2) Register A (channel = 1) */ 69 #define REG_TC2_RB1 (0x40014058U) /**< \brief (TC2) Register B (channel = 1) */ 70 #define REG_TC2_RC1 (0x4001405CU) /**< \brief (TC2) Register C (channel = 1) */ 71 #define REG_TC2_SR1 (0x40014060U) /**< \brief (TC2) Status Register (channel = 1) */ 72 #define REG_TC2_IER1 (0x40014064U) /**< \brief (TC2) Interrupt Enable Register (channel = 1) */ 73 #define REG_TC2_IDR1 (0x40014068U) /**< \brief (TC2) Interrupt Disable Register (channel = 1) */ 74 #define REG_TC2_IMR1 (0x4001406CU) /**< \brief (TC2) Interrupt Mask Register (channel = 1) */ 75 #define REG_TC2_EMR1 (0x40014070U) /**< \brief (TC2) Extended Mode Register (channel = 1) */ 76 #define REG_TC2_CCR2 (0x40014080U) /**< \brief (TC2) Channel Control Register (channel = 2) */ 77 #define REG_TC2_CMR2 (0x40014084U) /**< \brief (TC2) Channel Mode Register (channel = 2) */ 78 #define REG_TC2_SMMR2 (0x40014088U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 2) */ 79 #define REG_TC2_RAB2 (0x4001408CU) /**< \brief (TC2) Register AB (channel = 2) */ 80 #define REG_TC2_CV2 (0x40014090U) /**< \brief (TC2) Counter Value (channel = 2) */ 81 #define REG_TC2_RA2 (0x40014094U) /**< \brief (TC2) Register A (channel = 2) */ 82 #define REG_TC2_RB2 (0x40014098U) /**< \brief (TC2) Register B (channel = 2) */ 83 #define REG_TC2_RC2 (0x4001409CU) /**< \brief (TC2) Register C (channel = 2) */ 84 #define REG_TC2_SR2 (0x400140A0U) /**< \brief (TC2) Status Register (channel = 2) */ 85 #define REG_TC2_IER2 (0x400140A4U) /**< \brief (TC2) Interrupt Enable Register (channel = 2) */ 86 #define REG_TC2_IDR2 (0x400140A8U) /**< \brief (TC2) Interrupt Disable Register (channel = 2) */ 87 #define REG_TC2_IMR2 (0x400140ACU) /**< \brief (TC2) Interrupt Mask Register (channel = 2) */ 88 #define REG_TC2_EMR2 (0x400140B0U) /**< \brief (TC2) Extended Mode Register (channel = 2) */ 89 #define REG_TC2_BCR (0x400140C0U) /**< \brief (TC2) Block Control Register */ 90 #define REG_TC2_BMR (0x400140C4U) /**< \brief (TC2) Block Mode Register */ 91 #define REG_TC2_QIER (0x400140C8U) /**< \brief (TC2) QDEC Interrupt Enable Register */ 92 #define REG_TC2_QIDR (0x400140CCU) /**< \brief (TC2) QDEC Interrupt Disable Register */ 93 #define REG_TC2_QIMR (0x400140D0U) /**< \brief (TC2) QDEC Interrupt Mask Register */ 94 #define REG_TC2_QISR (0x400140D4U) /**< \brief (TC2) QDEC Interrupt Status Register */ 95 #define REG_TC2_FMR (0x400140D8U) /**< \brief (TC2) Fault Mode Register */ 96 #define REG_TC2_WPMR (0x400140E4U) /**< \brief (TC2) Write Protection Mode Register */ 97 #else 98 #define REG_TC2_CCR0 (*(__O uint32_t*)0x40014000U) /**< \brief (TC2) Channel Control Register (channel = 0) */ 99 #define REG_TC2_CMR0 (*(__IO uint32_t*)0x40014004U) /**< \brief (TC2) Channel Mode Register (channel = 0) */ 100 #define REG_TC2_SMMR0 (*(__IO uint32_t*)0x40014008U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 0) */ 101 #define REG_TC2_RAB0 (*(__I uint32_t*)0x4001400CU) /**< \brief (TC2) Register AB (channel = 0) */ 102 #define REG_TC2_CV0 (*(__I uint32_t*)0x40014010U) /**< \brief (TC2) Counter Value (channel = 0) */ 103 #define REG_TC2_RA0 (*(__IO uint32_t*)0x40014014U) /**< \brief (TC2) Register A (channel = 0) */ 104 #define REG_TC2_RB0 (*(__IO uint32_t*)0x40014018U) /**< \brief (TC2) Register B (channel = 0) */ 105 #define REG_TC2_RC0 (*(__IO uint32_t*)0x4001401CU) /**< \brief (TC2) Register C (channel = 0) */ 106 #define REG_TC2_SR0 (*(__I uint32_t*)0x40014020U) /**< \brief (TC2) Status Register (channel = 0) */ 107 #define REG_TC2_IER0 (*(__O uint32_t*)0x40014024U) /**< \brief (TC2) Interrupt Enable Register (channel = 0) */ 108 #define REG_TC2_IDR0 (*(__O uint32_t*)0x40014028U) /**< \brief (TC2) Interrupt Disable Register (channel = 0) */ 109 #define REG_TC2_IMR0 (*(__I uint32_t*)0x4001402CU) /**< \brief (TC2) Interrupt Mask Register (channel = 0) */ 110 #define REG_TC2_EMR0 (*(__IO uint32_t*)0x40014030U) /**< \brief (TC2) Extended Mode Register (channel = 0) */ 111 #define REG_TC2_CCR1 (*(__O uint32_t*)0x40014040U) /**< \brief (TC2) Channel Control Register (channel = 1) */ 112 #define REG_TC2_CMR1 (*(__IO uint32_t*)0x40014044U) /**< \brief (TC2) Channel Mode Register (channel = 1) */ 113 #define REG_TC2_SMMR1 (*(__IO uint32_t*)0x40014048U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 1) */ 114 #define REG_TC2_RAB1 (*(__I uint32_t*)0x4001404CU) /**< \brief (TC2) Register AB (channel = 1) */ 115 #define REG_TC2_CV1 (*(__I uint32_t*)0x40014050U) /**< \brief (TC2) Counter Value (channel = 1) */ 116 #define REG_TC2_RA1 (*(__IO uint32_t*)0x40014054U) /**< \brief (TC2) Register A (channel = 1) */ 117 #define REG_TC2_RB1 (*(__IO uint32_t*)0x40014058U) /**< \brief (TC2) Register B (channel = 1) */ 118 #define REG_TC2_RC1 (*(__IO uint32_t*)0x4001405CU) /**< \brief (TC2) Register C (channel = 1) */ 119 #define REG_TC2_SR1 (*(__I uint32_t*)0x40014060U) /**< \brief (TC2) Status Register (channel = 1) */ 120 #define REG_TC2_IER1 (*(__O uint32_t*)0x40014064U) /**< \brief (TC2) Interrupt Enable Register (channel = 1) */ 121 #define REG_TC2_IDR1 (*(__O uint32_t*)0x40014068U) /**< \brief (TC2) Interrupt Disable Register (channel = 1) */ 122 #define REG_TC2_IMR1 (*(__I uint32_t*)0x4001406CU) /**< \brief (TC2) Interrupt Mask Register (channel = 1) */ 123 #define REG_TC2_EMR1 (*(__IO uint32_t*)0x40014070U) /**< \brief (TC2) Extended Mode Register (channel = 1) */ 124 #define REG_TC2_CCR2 (*(__O uint32_t*)0x40014080U) /**< \brief (TC2) Channel Control Register (channel = 2) */ 125 #define REG_TC2_CMR2 (*(__IO uint32_t*)0x40014084U) /**< \brief (TC2) Channel Mode Register (channel = 2) */ 126 #define REG_TC2_SMMR2 (*(__IO uint32_t*)0x40014088U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 2) */ 127 #define REG_TC2_RAB2 (*(__I uint32_t*)0x4001408CU) /**< \brief (TC2) Register AB (channel = 2) */ 128 #define REG_TC2_CV2 (*(__I uint32_t*)0x40014090U) /**< \brief (TC2) Counter Value (channel = 2) */ 129 #define REG_TC2_RA2 (*(__IO uint32_t*)0x40014094U) /**< \brief (TC2) Register A (channel = 2) */ 130 #define REG_TC2_RB2 (*(__IO uint32_t*)0x40014098U) /**< \brief (TC2) Register B (channel = 2) */ 131 #define REG_TC2_RC2 (*(__IO uint32_t*)0x4001409CU) /**< \brief (TC2) Register C (channel = 2) */ 132 #define REG_TC2_SR2 (*(__I uint32_t*)0x400140A0U) /**< \brief (TC2) Status Register (channel = 2) */ 133 #define REG_TC2_IER2 (*(__O uint32_t*)0x400140A4U) /**< \brief (TC2) Interrupt Enable Register (channel = 2) */ 134 #define REG_TC2_IDR2 (*(__O uint32_t*)0x400140A8U) /**< \brief (TC2) Interrupt Disable Register (channel = 2) */ 135 #define REG_TC2_IMR2 (*(__I uint32_t*)0x400140ACU) /**< \brief (TC2) Interrupt Mask Register (channel = 2) */ 136 #define REG_TC2_EMR2 (*(__IO uint32_t*)0x400140B0U) /**< \brief (TC2) Extended Mode Register (channel = 2) */ 137 #define REG_TC2_BCR (*(__O uint32_t*)0x400140C0U) /**< \brief (TC2) Block Control Register */ 138 #define REG_TC2_BMR (*(__IO uint32_t*)0x400140C4U) /**< \brief (TC2) Block Mode Register */ 139 #define REG_TC2_QIER (*(__O uint32_t*)0x400140C8U) /**< \brief (TC2) QDEC Interrupt Enable Register */ 140 #define REG_TC2_QIDR (*(__O uint32_t*)0x400140CCU) /**< \brief (TC2) QDEC Interrupt Disable Register */ 141 #define REG_TC2_QIMR (*(__I uint32_t*)0x400140D0U) /**< \brief (TC2) QDEC Interrupt Mask Register */ 142 #define REG_TC2_QISR (*(__I uint32_t*)0x400140D4U) /**< \brief (TC2) QDEC Interrupt Status Register */ 143 #define REG_TC2_FMR (*(__IO uint32_t*)0x400140D8U) /**< \brief (TC2) Fault Mode Register */ 144 #define REG_TC2_WPMR (*(__IO uint32_t*)0x400140E4U) /**< \brief (TC2) Write Protection Mode Register */ 145 #endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ 146 147 #endif /* _SAMV71_TC2_INSTANCE_ */ 148