Home
last modified time | relevance | path

Searched +full:pmc +full:- +full:adc (Results 1 – 25 of 29) sorted by relevance

12

/linux-6.14.4/Documentation/devicetree/bindings/iio/adc/
Dgehc,pmc-adc.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/gehc,pmc-adc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: GE HealthCare PMC Analog to Digital Converter (ADC)
10 - Herve Codina <[email protected]>
13 The GE HealthCare PMC ADC is a 16-Channel (voltage and current), 16-Bit ADC
18 const: gehc,pmc-adc
23 vdd-supply:
27 vdda-supply:
[all …]
/linux-6.14.4/drivers/iio/adc/
Dgehc-pmc-adc.c1 // SPDX-License-Identifier: GPL-2.0
3 * The GE HealthCare PMC ADC is a 16-Channel (Voltage and current), 16-Bit
4 * ADC with an I2C Interface.
11 #include <dt-bindings/iio/adc/gehc,pmc-adc.h>
86 ret = i2c_smbus_read_word_swapped(pmc_adc->client, cmd); in pmc_adc_read_raw_ch()
88 dev_err(&pmc_adc->client->dev, "i2c read word failed (%d)\n", ret); in pmc_adc_read_raw_ch()
105 ret = pmc_adc_read_raw_ch(pmc_adc, chan->address, val); in pmc_adc_read_raw()
111 return -EINVAL; in pmc_adc_read_raw()
122 * args[1]: PMC ADC channel number in pmc_adc_fwnode_xlate()
124 if (iiospec->nargs != 2) in pmc_adc_fwnode_xlate()
[all …]
DMakefile1 # SPDX-License-Identifier: GPL-2.0
3 # Makefile for IIO ADC drivers
7 obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
8 obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
9 obj-$(CONFIG_AD4000) += ad4000.o
10 obj-$(CONFIG_AD4130) += ad4130.o
11 obj-$(CONFIG_AD4695) += ad4695.o
12 obj-$(CONFIG_AD7091R) += ad7091r-base.o
13 obj-$(CONFIG_AD7091R5) += ad7091r5.o
14 obj-$(CONFIG_AD7091R8) += ad7091r8.o
[all …]
DKconfig1 # SPDX-License-Identifier: GPL-2.0-only
3 # ADC drivers
10 bool "ST-Ericsson AB8500 GPADC driver"
25 tristate "Analog Devices AD4000 ADC Driver"
31 SPI analog to digital converters (ADC).
37 tristate "Analog Device AD4130 ADC Driver"
45 Say yes here to build support for Analog Devices AD4130-8 SPI analog
46 to digital converters (ADC).
52 tristate "Analog Device AD4695 ADC Driver"
59 analog to digital converters (ADC).
[all …]
/linux-6.14.4/arch/arm/boot/dts/microchip/
Dsama5d2.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC
9 #include <dt-bindings/dma/at91.h>
10 #include <dt-bindings/interrupt-controller/irq.h>
11 #include <dt-bindings/clock/at91.h>
12 #include <dt-bindings/mfd/at91-usart.h>
13 #include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
16 #address-cells = <1>;
17 #size-cells = <1>;
20 interrupt-parent = <&aic>;
[all …]
Dat91sam9260.dtsi1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
7 * 2011 Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
10 #include <dt-bindings/pinctrl/at91.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/clock/at91.h>
14 #include <dt-bindings/mfd/at91-usart.h>
17 #address-cells = <1>;
18 #size-cells = <1>;
[all …]
Dat91sam9x5.dtsi1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
11 #include <dt-bindings/dma/at91.h>
12 #include <dt-bindings/pinctrl/at91.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
14 #include <dt-bindings/gpio/gpio.h>
15 #include <dt-bindings/clock/at91.h>
16 #include <dt-bindings/mfd/at91-usart.h>
19 #address-cells = <1>;
20 #size-cells = <1>;
[all …]
Dat91sam9g20.dtsi1 // SPDX-License-Identifier: GPL-2.0-only
3 * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
5 * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
23 compatible = "mmio-sram";
25 #address-cells = <1>;
26 #size-cells = <1>;
33 compatible = "atmel,at91sam9g20-i2c";
37 compatible = "atmel,at91sam9rl-ssc";
40 adc0: adc@fffe0000 {
41 atmel,adc-startup-time = <40>;
[all …]
Dat91sam9rl.dtsi1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
6 * Alexandre Belloni <alexandre.belloni@free-electrons.com>
9 #include <dt-bindings/pinctrl/at91.h>
10 #include <dt-bindings/clock/at91.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/pwm/pwm.h>
14 #include <dt-bindings/mfd/at91-usart.h>
17 #address-cells = <1>;
[all …]
Dsama7g5.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC
12 #include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
14 #include <dt-bindings/interrupt-controller/arm-gic.h>
15 #include <dt-bindings/clock/at91.h>
16 #include <dt-bindings/dma/at91.h>
17 #include <dt-bindings/gpio/gpio.h>
18 #include <dt-bindings/mfd/at91-usart.h>
19 #include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
[all …]
Dsama5d3.dtsi1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
10 #include <dt-bindings/dma/at91.h>
11 #include <dt-bindings/pinctrl/at91.h>
12 #include <dt-bindings/interrupt-controller/irq.h>
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/clock/at91.h>
15 #include <dt-bindings/mfd/at91-usart.h>
18 #address-cells = <1>;
19 #size-cells = <1>;
[all …]
Dsama5d4.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC
9 #include <dt-bindings/clock/at91.h>
10 #include <dt-bindings/dma/at91.h>
11 #include <dt-bindings/mfd/at91-usart.h>
12 #include <dt-bindings/pinctrl/at91.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
14 #include <dt-bindings/gpio/gpio.h>
17 #address-cells = <1>;
18 #size-cells = <1>;
[all …]
Dat91sam9g45.dtsi1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
11 #include <dt-bindings/dma/at91.h>
12 #include <dt-bindings/pinctrl/at91.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
14 #include <dt-bindings/gpio/gpio.h>
15 #include <dt-bindings/clock/at91.h>
16 #include <dt-bindings/mfd/at91-usart.h>
19 #address-cells = <1>;
20 #size-cells = <1>;
[all …]
Dsam9x60.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC
10 #include <dt-bindings/dma/at91.h>
11 #include <dt-bindings/pinctrl/at91.h>
12 #include <dt-bindings/interrupt-controller/irq.h>
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/clock/at91.h>
15 #include <dt-bindings/mfd/at91-usart.h>
16 #include <dt-bindings/mfd/atmel-flexcom.h>
19 #address-cells = <1>;
[all …]
Dsama5d3xmb.dtsi1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
16 pinctrl-names = "default";
17 pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
21 bus-width = <4>;
22 cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
31 spi-max-frequency = <50000000>;
37 atmel,clk-from-rk-pin;
49 clocks = <&pmc PMC_TYPE_SYSTEM 8>;
50 clock-names = "mclk";
[all …]
Dsama5d3xmb_cmp.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board
10 compatible = "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5";
15 pinctrl-names = "default";
16 pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
20 bus-width = <4>;
21 cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
30 spi-max-frequency = <50000000>;
36 atmel,clk-from-rk-pin;
48 clocks = <&pmc PMC_TYPE_SYSTEM 8>;
[all …]
Dat91-sama5d4ek.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
8 /dts-v1/;
12 model = "Atmel SAMA5D4-EK";
16 stdout-path = "serial0:115200n8";
25 clock-frequency = <32768>;
29 clock-frequency = <12000000>;
35 adc0: adc@fc034000 {
36 pinctrl-names = "default";
37 pinctrl-0 = <
[all …]
Dat91sam9m10g45ek.dts1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
8 /dts-v1/;
10 #include <dt-bindings/pwm/pwm.h>
13 model = "Atmel AT91SAM9M10G45-EK";
18 stdout-path = "serial0:115200n8";
27 clock-frequency = <32768>;
31 clock-frequency = <12000000>;
43 compatible = "atmel,tcb-timer";
48 compatible = "atmel,tcb-timer";
[all …]
/linux-6.14.4/drivers/mfd/
DKconfig1 # SPDX-License-Identifier: GPL-2.0-only
57 tristate "Active-semi ACT8945A"
62 Support for the ACT8945A PMIC from Active-semi. This device
63 features three step-down DC/DC converters and four low-dropout
75 Select this to get support for Allwinner SoCs (A10, A13 and A31) ADC.
78 the ADC or the thermal sensor. This will try to probe the ADC driver
79 sun4i-gpadc-iio and the hwmon driver iio_hwmon.
82 called sun4i-gpadc.
113 tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
115 over current monitoring, GPIOs, ADC and a watchdog.
[all …]
/linux-6.14.4/arch/arm/boot/dts/nvidia/
Dtegra30-colibri.dtsi1 // SPDX-License-Identifier: GPL-2.0
15 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
16 nvidia,hpd-gpio =
18 pll-supply = <&reg_1v8_avdd_hdmi_pll>;
19 vdd-supply = <&reg_3v3_avdd_hdmi>;
24 lan-reset-n-hog {
25 gpio-hog;
27 output-high;
28 line-name = "LAN_RESET#";
33 pinctrl-names = "default";
[all …]
Dtegra30-apalis-v1.1.dtsi1 // SPDX-License-Identifier: GPL-2.0 OR MIT
16 avdd-pexa-supply = <&vdd2_reg>;
17 avdd-pexb-supply = <&vdd2_reg>;
18 avdd-pex-pll-supply = <&vdd2_reg>;
19 avdd-plle-supply = <&ldo6_reg>;
20 hvdd-pex-supply = <&reg_module_3v3>;
21 vddio-pex-ctl-supply = <&reg_module_3v3>;
22 vdd-pexa-supply = <&vdd2_reg>;
23 vdd-pexb-supply = <&vdd2_reg>;
27 nvidia,num-lanes = <4>;
[all …]
Dtegra30-apalis.dtsi1 // SPDX-License-Identifier: GPL-2.0
15 avdd-pexa-supply = <&vdd2_reg>;
16 avdd-pexb-supply = <&vdd2_reg>;
17 avdd-pex-pll-supply = <&vdd2_reg>;
18 avdd-plle-supply = <&ldo6_reg>;
19 hvdd-pex-supply = <&reg_module_3v3>;
20 vddio-pex-ctl-supply = <&reg_module_3v3>;
21 vdd-pexa-supply = <&vdd2_reg>;
22 vdd-pexb-supply = <&vdd2_reg>;
26 nvidia,num-lanes = <4>;
[all …]
Dtegra114-asus-tf701t.dts1 // SPDX-License-Identifier: GPL-2.0
3 /dts-v1/;
5 #include <dt-bindings/input/gpio-keys.h>
6 #include <dt-bindings/input/input.h>
13 chassis-type = "convertible";
29 trusted-foundations {
30 compatible = "tlm,trusted-foundations";
31 tlm,version-major = <2>;
32 tlm,version-minor = <8>;
40 reserved-memory {
[all …]
/linux-6.14.4/
DMAINTAINERS5 ---------------------------------------------------
21 W: *Web-page* with status/info
23 B: URI for where to file *bugs*. A web-page with detailed bug
28 patches to the given subsystem. This is either an in-tree file,
29 or a URI. See Documentation/maintainer/maintainer-entry-profile.rst
46 N: [^a-z]tegra all files whose path contains tegra
64 ----------------
83 3WARE SAS/SATA-RAID SCSI DRIVERS (3W-XXXX, 3W-9XXX, 3W-SAS)
85 L: linux-[email protected]
88 F: drivers/scsi/3w-*
[all …]
/linux-6.14.4/Documentation/admin-guide/media/
Dbttv.rst1 .. SPDX-License-Identifier: GPL-2.0
8 ----------------------
12 ./scripts/config -e PCI
13 ./scripts/config -m I2C
14 ./scripts/config -m INPUT
15 ./scripts/config -m MEDIA_SUPPORT
16 ./scripts/config -e MEDIA_PCI_SUPPORT
17 ./scripts/config -e MEDIA_ANALOG_TV_SUPPORT
18 ./scripts/config -e MEDIA_DIGITAL_TV_SUPPORT
19 ./scripts/config -e MEDIA_RADIO_SUPPORT
[all …]

12