| /linux-6.14.4/Documentation/devicetree/bindings/regulator/ |
| D | nxp,pca9450-regulator.yaml | 22 # LDO1, LDO2, LDO3, LDO4, LDO5
82 description: GPIO that is used to switch LDO5 between being configured by
187 ldo5: LDO5 {
188 regulator-name = "LDO5";
|
| D | mt6360-regulator.yaml | 23 description: Input supply phandle(s) for LDO5
99 ldo5 {
100 regulator-name = "mt6360,ldo5";
|
| D | pv88060.txt | 11 BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4,
63 LDO5 {
64 regulator-name = "ldo5";
|
| D | max8925-regulator.txt | 12 - LDO5 for LDO LDO5
|
| D | dlg,slg51000.yaml | 38 Input supply for ldo5, required if regulator is enabled
113 ldo5 {
|
| D | rohm,bd71837-regulator.yaml | 22 disabled by driver at startup. LDO5 and LDO6 are supplied by those and
23 if they are disabled at startup the voltage monitoring for LDO5/LDO6 will
28 # LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
|
| /linux-6.14.4/drivers/regulator/ |
| D | tps65912-regulator.c | 20 LDO4, LDO5, LDO6, LDO7, LDO8, LDO9, LDO10 }; enumerator
97 TPS65912_REGULATOR("LDO5", LDO5, "ldo5", tps65912_ops_ldo,
|
| D | max8893.c | 105 .name = "LDO5",
106 .supply_name = "in-ldo5",
107 .of_match = of_match_ptr("ldo5"),
|
| D | qcom-rpmh-regulator.c | 933 RPMH_VREG("ldo5", "ldo%s5", &pmic4_nldo, "vdd-l4-l5"),
995 RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
1025 RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l4-l5-l6"),
1051 RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
1082 RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo515, "vdd-s9"),
1107 RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l3-l5"),
1131 RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"),
1163 RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l16"),
1231 RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"),
1244 RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"),
[all …]
|
| D | rn5t618-regulator.c | 54 REG(LDO5, LDOEN1, BIT(4), LDO5DAC, 0x7f, 900000, 3500000, 25000),
70 REG(LDO5, LDOEN1, BIT(4), LDO5DAC, 0x7f, 900000, 3500000, 25000),
88 REG(LDO5, LDOEN1, BIT(4), LDO5DAC, 0x7f, 600000, 3500000, 25000),
|
| /linux-6.14.4/drivers/mfd/ |
| D | rohm-bd96801.c | 85 DEFINE_RES_IRQ_NAMED(BD96801_LDO5_PVIN_ERR_STAT, "bd96801-ldo5-pvin-err"),
86 DEFINE_RES_IRQ_NAMED(BD96801_LDO5_OVP_ERR_STAT, "bd96801-ldo5-ovp-err"),
87 DEFINE_RES_IRQ_NAMED(BD96801_LDO5_UVP_ERR_STAT, "bd96801-ldo5-uvp-err"),
88 DEFINE_RES_IRQ_NAMED(BD96801_LDO5_SHDN_ERR_STAT, "bd96801-ldo5-shdn-err"),
132 DEFINE_RES_IRQ_NAMED(BD96801_LDO5_OCPH_STAT, "bd96801-ldo5-overcurr"),
133 DEFINE_RES_IRQ_NAMED(BD96801_LDO5_OVD_STAT, "bd96801-ldo5-overvolt"),
134 DEFINE_RES_IRQ_NAMED(BD96801_LDO5_UVD_STAT, "bd96801-ldo5-undervolt"),
245 /* Reg 0x59 LDO5 ERR IRQs */
296 /* LDO5 INTB */
|
| /linux-6.14.4/arch/arm/boot/dts/ti/omap/ |
| D | dra72-evm-tps65917.dtsi | 31 ldo5-in-supply = <&vsys_3v3>;
105 ldo5_reg: ldo5 {
107 regulator-name = "ldo5";
|
| /linux-6.14.4/arch/arm64/boot/dts/freescale/ |
| D | imx8mp-icore-mx8mp.dtsi | 103 ldo5: LDO5 { label
108 regulator-name = "LDO5";
|
| D | imx8mm-emtop-som.dtsi | 148 ldo5: LDO5 { label
149 regulator-name = "LDO5";
|
| D | imx8mp-debix-som-a.dtsi | 148 ldo5: LDO5 { label
149 regulator-name = "LDO5";
|
| D | imx8mp-phycore-som.dtsi | 168 ldo5: LDO5 { label
173 regulator-name = "NVCC_SD2 (LDO5)";
|
| D | imx8mp-nitrogen-smarc-som.dtsi | 151 ldo5: LDO5 { label
152 regulator-name = "LDO5";
|
| /linux-6.14.4/Documentation/devicetree/bindings/mfd/ |
| D | da9052-i2c.txt | 27 ldo5 : regulator LDO5
|
| D | wm831x.txt | 47 ldo5 : LDO5
|
| D | da9055.txt | 39 ldo5 : regulator LDO5
|
| D | rohm,bd71815-pmic.yaml | 179 ldo5: ldo5 {
180 regulator-name = "ldo5";
|
| D | rohm,bd71828-pmic.yaml | 180 ldo5: LDO5 {
181 regulator-name = "ldo5";
|
| D | rohm,bd71847-pmic.yaml | 216 ldo5: LDO5 {
217 regulator-name = "ldo5";
|
| D | rohm,bd71837-pmic.yaml | 227 ldo5: LDO5 {
228 regulator-name = "ldo5";
|
| /linux-6.14.4/arch/mips/boot/dts/ingenic/ |
| D | gcw0.dts | 56 VCC-supply = <&ldo5>;
64 VCC-supply = <&ldo5>;
270 ldo5: LDO5 { label
499 vcc-supply = <&ldo5>;
|