| /linux-6.14.4/drivers/iio/accel/ |
| D | Kconfig | 10 tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer"
15 Say Y here to build support for Analog Devices adis16201 dual-axis
22 tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer"
27 Say Y here to build support for Analog Devices adis16209 dual-axis digital inclinometer
37 tristate "Analog Devices ADXL313 3-Axis Digital Accelerometer I2C Driver"
43 ADXL313 3-axis digital accelerometer.
50 tristate "Analog Devices ADXL313 3-Axis Digital Accelerometer SPI Driver"
56 ADXL313 3-axis digital accelerometer.
66 tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer I2C Driver"
73 ADXL345 or ADXL375 3-axis digital accelerometer.
[all …]
|
| /linux-6.14.4/drivers/iio/magnetometer/ |
| D | Kconfig | 10 tristate "Voltafield AF8133J 3-Axis Magnetometer"
18 3-axis magnetometer chip.
24 tristate "Asahi Kasei AK8974 3-Axis Magnetometer"
31 AMI306 I2C-based 3-axis magnetometer chips.
37 tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
44 AK09911, AK09912, AK09916 or AK09918 3-Axis Magnetometer.
50 tristate "Asahi Kasei AK09911 3-axis Compass"
110 tristate "Freescale MAG3110 3-Axis Magnetometer"
115 Say yes here to build support for the Freescale MAG3110 3-Axis
132 tristate "MEMSIC MMC35240 3-axis magnetic sensor"
[all …]
|
| /linux-6.14.4/Documentation/devicetree/bindings/input/ |
| D | adc-joystick.yaml | 29 Each pair defines one ADC channel to which a joystick axis is connected.
51 "^axis@[0-9a-f]+$":
55 Represents a joystick axis bound to the given ADC channel.
56 For each entry in the io-channels list, one axis subnode with a matching
63 description: Index of an io-channels list entry bound to this axis.
66 description: EV_ABS specific event code generated by the axis.
74 Minimum and maximum values produced by the axis.
75 For an ABS_X axis this will be the left-most and right-most
77 treat the axis as inverted.
84 Omitting this property indicates the axis is precise.
[all …]
|
| D | rotary-encoder.yaml | 22 linux,axis:
25 the input subsystem axis to map to this rotary encoder.
33 encoder. Only relevant for absolute axis. Defaults to 24 which is a
36 rotary-encoder,relative-axis:
39 register a relative axis rather than an
40 absolute one. Relative axis will only generate +1/-1 events on the input
47 greater than the specified steps or smaller than 0. For absolute axis only.
86 linux,axis = <0>; /* REL_X */
88 rotary-encoder,relative-axis;
|
| /linux-6.14.4/drivers/staging/axis-fifo/ |
| D | axis-fifo.txt | 28 - xlnx,axis-tdest-width: AXI-Stream TDEST width (ignored by the driver)
29 - xlnx,axis-tid-width: AXI-Stream TID width (ignored by the driver)
30 - xlnx,axis-tuser-width: AXI-Stream TUSER width (ignored by the driver)
32 - xlnx,has-axis-tdest: Should be <0x0> (this feature isn't supported)
33 - xlnx,has-axis-tid: Should be <0x0> (this feature isn't supported)
34 - xlnx,has-axis-tkeep: Should be <0x0> (this feature isn't supported)
35 - xlnx,has-axis-tstrb: Should be <0x0> (this feature isn't supported)
36 - xlnx,has-axis-tuser: Should be <0x0> (this feature isn't supported)
70 xlnx,axis-tdest-width = <0x4>;
71 xlnx,axis-tid-width = <0x4>;
[all …]
|
| /linux-6.14.4/drivers/input/ |
| D | touchscreen.c | 34 unsigned long axis, in touchscreen_set_params() argument
39 if (!test_bit(axis, dev->absbit)) { in touchscreen_set_params()
41 "Parameters are specified but the axis %lu is not set up\n", in touchscreen_set_params()
42 axis); in touchscreen_set_params()
46 absinfo = &dev->absinfo[axis]; in touchscreen_set_params()
58 * axis swap and invert info for use with touchscreen_report_x_y();
70 unsigned int axis, axis_x, axis_y; in touchscreen_parse_properties() local
107 axis = multitouch ? ABS_MT_PRESSURE : ABS_PRESSURE; in touchscreen_parse_properties()
110 input_abs_get_max(input, axis), in touchscreen_parse_properties()
114 input_abs_get_fuzz(input, axis), in touchscreen_parse_properties()
[all …]
|
| /linux-6.14.4/Documentation/devicetree/bindings/pci/ |
| D | axis,artpec6-pcie.txt | 1 * Axis ARTPEC-6 PCIe interface
7 - compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode;
8 "axis,artpec6-pcie-ep", "snps,dw-pcie" for ARTPEC-6 in EP mode;
9 "axis,artpec7-pcie", "snps,dw-pcie" for ARTPEC-7 in RC mode;
10 "axis,artpec7-pcie-ep", "snps,dw-pcie" for ARTPEC-7 in EP mode;
21 - axis,syscon-pcie: A phandle pointing to the ARTPEC-6 system controller,
27 compatible = "axis,artpec6-pcie", "snps,dw-pcie";
49 axis,syscon-pcie = <&syscon>;
|
| /linux-6.14.4/Documentation/devicetree/bindings/crypto/ |
| D | artpec6-crypto.txt | 1 Axis crypto engine with PDMA interface.
5 "axis,artpec6-crypto" for the version in the Axis ARTPEC-6 SoC
6 "axis,artpec7-crypto" for the version in the Axis ARTPEC-7 SoC.
13 compatible = "axis,artpec6-crypto";
|
| /linux-6.14.4/Documentation/devicetree/bindings/ |
| D | trivial-devices.yaml | 92 # DMARD05: 3-axis I2C Accelerometer
94 # DMARD06: 3-axis I2C Accelerometer
96 # DMARD05: 3-axis I2C Accelerometer
98 # DMARD09: 3-axis Accelerometer
100 # DMARD10: 3-axis Accelerometer
102 # MMA7660FC: 3-Axis Orientation/Motion Detection Sensor
104 # MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
188 # mCube 3-axis 8-bit digital accelerometer
208 # MEMSIC 3-axis accelerometer
210 # MEMSIC 2-axis 8-bit digital accelerometer
[all …]
|
| /linux-6.14.4/drivers/iio/gyro/ |
| D | Kconfig | 45 tristate "Analog Devices ADXRS290 Dual-Axis MEMS Gyroscope SPI driver"
74 Say yes here to build support for BOSCH BMG160 Tri-axis Gyro Sensor
97 Say yes here to build support for NXP FXAS21002C Tri-axis Gyro
139 tristate "STMicroelectronics gyroscopes 3-Axis Driver"
151 tristate "STMicroelectronics gyroscopes 3-Axis I2C Interface"
163 tristate "STMicroelectronics gyroscopes 3-Axis SPI Interface"
175 tristate "InvenSense ITG3200 Digital 3-Axis Gyroscope I2C driver"
180 3-axis gyroscope sensor.
|
| /linux-6.14.4/Documentation/iio/ |
| D | adis16480.rst | 62 | 3-Axis Magnetometer related device files | Description …
66 | in_magn_x_calibbias | Calibration offset for the X-axis magnetometer channel…
68 | in_magn_x_filter_low_pass_3db_frequency | Bandwidth for the X-axis magnetometer channel. …
70 | in_magn_x_raw | Raw X-axis magnetometer channel value. …
72 | in_magn_y_calibbias | Calibration offset for the Y-axis magnetometer channel…
74 | in_magn_y_filter_low_pass_3db_frequency | Bandwidth for the Y-axis magnetometer channel. …
76 | in_magn_y_raw | Raw Y-axis magnetometer channel value. …
78 | in_magn_z_calibbias | Calibration offset for the Z-axis magnetometer channel…
80 | in_magn_z_filter_low_pass_3db_frequency | Bandwidth for the Z-axis magnetometer channel. …
82 | in_magn_z_raw | Raw Z-axis magnetometer channel value. …
[all …]
|
| D | adis16475.rst | 63 | 3-Axis Accelerometer related device files | Description …
67 | in_accel_x_calibbias | Calibration offset for the X-axis accelerometer chann…
69 | in_accel_x_raw | Raw X-axis accelerometer channel value. …
71 | in_accel_y_calibbias | Calibration offset for the Y-axis accelerometer chann…
73 | in_accel_y_raw | Raw Y-axis accelerometer channel value. …
75 | in_accel_z_calibbias | Calibration offset for the Z-axis accelerometer chann…
77 | in_accel_z_raw | Raw Z-axis accelerometer channel value. …
81 | in_deltavelocity_x_raw | Raw X-axis delta velocity channel value. …
83 | in_deltavelocity_y_raw | Raw Y-axis delta velocity channel value. …
85 | in_deltavelocity_z_raw | Raw Z-axis delta velocity channel value. …
[all …]
|
| /linux-6.14.4/drivers/hid/ |
| D | hid-universal-pidff.c | 117 int axis; in universal_pidff_input_configured() local
124 for (axis = ABS_X; axis <= ABS_BRAKE; axis++) { in universal_pidff_input_configured()
125 if (!test_bit(axis, input->absbit)) in universal_pidff_input_configured()
128 input_set_abs_params(input, axis, in universal_pidff_input_configured()
129 input->absinfo[axis].minimum, in universal_pidff_input_configured()
130 input->absinfo[axis].maximum, in universal_pidff_input_configured()
131 axis == ABS_X ? 0 : 8, 0); in universal_pidff_input_configured()
134 /* Remove fuzz and deadzone from the second joystick axis */ in universal_pidff_input_configured()
|
| /linux-6.14.4/Documentation/devicetree/bindings/iio/accel/ |
| D | lis302.txt | 25 x/y/z axis.
28 x/y/z axis.
29 - st,click-thresh-{x,y,z}: set the x/y/z axis threshold
47 - st,wakeup-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for
50 - st,wakeup2-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for
59 - st,axis-{x,y,z}=: set the axis to map to the three coordinates.
60 Negative values can be used for inverted axis.
61 - st,{min,max}-limit-{x,y,z} set the min/max limits for x/y/z axis
|
| /linux-6.14.4/Documentation/input/joydev/ |
| D | joystick-api.rst | 57 __u8 number; /* axis/button number */
88 The values of ``number`` correspond to the axis or button that
90 is, you have both an axis 0 and a button 0). Generally,
93 Axis number
95 1st Axis X 0
96 1st Axis Y 1
97 2nd Axis X 2
98 2nd Axis Y 3
110 For an axis, ``value`` is a signed integer between -32767 and +32767
111 representing the position of the joystick along that axis. If you
[all …]
|
| /linux-6.14.4/sound/pci/ |
| D | azt3328.h | 175 * still lets us evaluate button states, but not axis states */
209 * axis measurement bits enabled
216 /* enables axis 1 (X axis) measurement: */
218 /* enables axis 2 (Y axis) measurement: */
220 /* enables axis 3 (X axis) measurement: */
222 /* enables axis 4 (Y axis) measurement: */
224 /* selects the current axis to read the measured value of
226 * 00 = axis 1, 01 = axis 2, 10 = axis 3, 11 = axis 4: */
248 /* R: value of currently configured axis (word value!);
249 * W: trigger axis measurement */
|
| /linux-6.14.4/drivers/staging/media/atomisp/pci/isp/kernels/tnr/tnr3/ |
| D | ia_css_tnr3_types.h | 25 * each. Each line graph has Luma values on the x axis and sigma values for
26 * each plane on the y axis. The three linear segments may have a different
29 * specified each on the Luma axis and the per plane Sigma axis. On the Luma
30 * axis two points are fixed (namely 0 and maximum luma value - depending on
33 * the per plane sigma axis are also specified at the interface.
|
| /linux-6.14.4/Documentation/devicetree/bindings/iio/ |
| D | mount-matrix.txt | 29 screen and (z) being depth, the axis perpendicular to the screen.
55 9.81 m/s^2 upwards along the (z) axis, i.e. out of the screen when the device
57 as the gravity vector is projected 1:1 onto the sensors (z)-axis.
78 its top towards surface, you get a negative y axis.
97 perpendicular to the North axis and positive towards the East and (z) is
131 device on a flat surface and spin it around the z axis (such as rotating a
133 along the (z) axis if rotated clockwise, and a positive value if rotated
189 The sensor is mounted 30 degrees (Pi/6 radians) tilted along the X axis, so we
190 compensate by performing a -30 degrees rotation around the X axis:
196 The sensor is flipped 180 degrees (Pi radians) around the Z axis, i.e. mounted
|
| /linux-6.14.4/drivers/iio/imu/ |
| D | adis16400.c | 31 #define ADIS16400_XGYRO_OUT 0x04 /* X-axis gyroscope output */
32 #define ADIS16400_YGYRO_OUT 0x06 /* Y-axis gyroscope output */
33 #define ADIS16400_ZGYRO_OUT 0x08 /* Z-axis gyroscope output */
34 #define ADIS16400_XACCL_OUT 0x0A /* X-axis accelerometer output */
35 #define ADIS16400_YACCL_OUT 0x0C /* Y-axis accelerometer output */
36 #define ADIS16400_ZACCL_OUT 0x0E /* Z-axis accelerometer output */
37 #define ADIS16400_XMAGN_OUT 0x10 /* X-axis magnetometer measurement */
38 #define ADIS16400_YMAGN_OUT 0x12 /* Y-axis magnetometer measurement */
39 #define ADIS16400_ZMAGN_OUT 0x14 /* Z-axis magnetometer measurement */
43 #define ADIS16350_XTEMP_OUT 0x10 /* X-axis gyroscope temperature measurement */
[all …]
|
| /linux-6.14.4/Documentation/devicetree/bindings/arm/ |
| D | axis.txt | 1 Axis Communications AB
8 - compatible = "axis,artpec6";
13 - compatible = "axis,artpec6-dev-board", "axis,artpec6";
|
| /linux-6.14.4/include/linux/input/ |
| D | mt.h | 90 static inline bool input_is_mt_value(int axis) in input_is_mt_value() argument
92 return axis >= ABS_MT_FIRST && axis <= ABS_MT_LAST; in input_is_mt_value()
95 static inline bool input_is_mt_axis(int axis) in input_is_mt_axis() argument
97 return axis == ABS_MT_SLOT || input_is_mt_value(axis); in input_is_mt_axis()
|
| /linux-6.14.4/Documentation/input/devices/ |
| D | iforce-protocol.rst | 60 axis::
64 00 X-Axis lsb
65 01 X-Axis msb
66 02 Y-Axis lsb, or gas pedal for a wheel
67 03 Y-Axis msb, or brake pedal for a wheel
111 Bits 4-7: Val 2 = effect along one axis. Byte 05 indicates direction
112 Val 4 = X axis only. Byte 05 must contain 5a
113 Val 8 = Y axis only. Byte 05 must contain b4
128 08-09 Address of interactive parameters for X-axis,
130 0a-0b Address of interactive parameters for Y-axis,
[all …]
|
| /linux-6.14.4/drivers/input/misc/ |
| D | adxl34x.c | 3 * ADXL345/346 Three-Axis Digital Accelerometers
25 #define OFSX 0x1E /* R/W X-axis offset */
26 #define OFSY 0x1F /* R/W Y-axis offset */
27 #define OFSZ 0x20 /* R/W Z-axis offset */
34 #define ACT_INACT_CTL 0x27 /* R/W Axis enable control for activity and */
38 #define TAP_AXES 0x2A /* R/W Axis control for tap/double tap */
46 #define DATAX0 0x32 /* R X-Axis Data 0 */
47 #define DATAX1 0x33 /* R X-Axis Data 1 */
48 #define DATAY0 0x34 /* R Y-Axis Data 0 */
49 #define DATAY1 0x35 /* R Y-Axis Data 1 */
[all …]
|
| /linux-6.14.4/drivers/iio/imu/st_lsm6dsx/ |
| D | Kconfig | 4 tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors"
42 tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors I2C Interface"
48 tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors SPI Interface"
54 tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors I3C Interface"
|
| /linux-6.14.4/Documentation/devicetree/bindings/clock/ |
| D | artpec6.txt | 1 * Clock bindings for Axis ARTPEC-6 chip
19 See dt-bindings/clock/axis,artpec6-clkctrl.h for the list of valid identifiers.
20 - compatible: Should be "axis,artpec6-clkctrl"
37 compatible = "axis,artpec6-clkctrl";
|