Home
last modified time | relevance | path

Searched +full:access +full:- +full:ns (Results 1 – 25 of 616) sorted by relevance

12345678910>>...25

/linux-6.14.4/arch/arm/boot/dts/ti/omap/
Domap3430-sdp.dts1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
11 compatible = "ti,omap3430-sdp", "ti,omap3430", "ti,omap3";
20 clock-frequency = <2600000>;
32 vmmc-supply = <&vmmc1>;
33 vqmmc-supply = <&vsim>;
35 * S6-3 must be in ON position for 8 bit mode to function
38 bus-width = <8>;
55 compatible = "cfi-flash";
[all …]
Domap-gpmc-smsc911x.dtsi1 // SPDX-License-Identifier: GPL-2.0
10 vddvario: regulator-vddvario {
11 compatible = "regulator-fixed";
12 regulator-name = "vddvario";
13 regulator-always-on;
16 vdd33a: regulator-vdd33a {
17 compatible = "regulator-fixed";
18 regulator-name = "vdd33a";
19 regulator-always-on;
26 bank-width = <2>;
[all …]
Domap-gpmc-smsc9221.dtsi1 // SPDX-License-Identifier: GPL-2.0
14 vddvario: regulator-vddvario {
15 compatible = "regulator-fixed";
16 regulator-name = "vddvario";
17 regulator-always-on;
20 vdd33a: regulator-vdd33a {
21 compatible = "regulator-fixed";
22 regulator-name = "vdd33a";
23 regulator-always-on;
30 bank-width = <2>;
[all …]
Domap3-overo-tobiduo-common.dtsi1 // SPDX-License-Identifier: GPL-2.0-only
10 #include "omap3-overo-common-peripherals.dtsi"
12 #include "omap-gpmc-smsc9221.dtsi"
17 interrupt-parent = <&gpio6>;
23 bank-width = <2>;
25 gpmc,mux-add-data = <0>;
26 gpmc,cs-on-ns = <0>;
27 gpmc,cs-rd-off-ns = <42>;
28 gpmc,cs-wr-off-ns = <36>;
29 gpmc,adv-on-ns = <6>;
[all …]
Domap2430-sdp.dts1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
11 compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
20 clock-frequency = <100000>;
31 vmmc-supply = <&vmmc1>;
32 bus-width = <4>;
39 interrupt-parent = <&gpio5>;
42 bank-width = <2>;
43 gpmc,sync-clk-ps = <0>;
[all …]
Domap3-igep.dtsi1 // SPDX-License-Identifier: GPL-2.0-only
8 /dts-v1/;
19 stdout-path = &uart3;
23 compatible = "ti,omap-twl4030";
28 vdd33: regulator-vdd33 {
29 compatible = "regulator-fixed";
30 regulator-name = "vdd33";
31 regulator-always-on;
37 gpmc_pins: gpmc-pins {
38 pinctrl-single,pins = <
[all …]
Domap-zoom-common.dtsi1 // SPDX-License-Identifier: GPL-2.0
6 #include "omap-gpmc-smsc911x.dtsi"
20 bank-width = <2>;
21 reg-shift = <1>;
22 reg-io-width = <1>;
23 interrupt-parent = <&gpio4>;
25 clock-frequency = <1843200>;
26 current-speed = <115200>;
27 gpmc,mux-add-data = <0>;
28 gpmc,device-width = <1>;
[all …]
Domap3-sb-t35.dtsi1 // SPDX-License-Identifier: GPL-2.0
3 * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
10 powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */
12 pinctrl-names = "default";
13 pinctrl-0 = <&tfp410_pins>;
16 #address-cells = <1>;
17 #size-cells = <0>;
23 remote-endpoint = <&dpi_out>;
31 remote-endpoint = <&dvi_connector_in>;
37 dvi0: dvi-connector {
[all …]
Domap3-gta04a5one.dts1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2014-18 H. Nikolaus Schaller <[email protected]>
6 #include "omap3-gta04a5.dts"
13 gpmc_pins: gpmc-pins {
14 pinctrl-single,pins = <
45 pinctrl-names = "default";
46 pinctrl-0 = <&gpmc_pins>;
48 /delete-node/ nand@0,0;
52 #address-cells = <1>;
53 #size-cells = <1>;
[all …]
Domap3-devkit8000-common.dtsi1 // SPDX-License-Identifier: GPL-2.0-only
6 #include <dt-bindings/input/input.h>
16 compatible = "gpio-leds";
18 led-heartbeat {
20 gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */
21 default-state = "on";
22 linux,default-trigger = "heartbeat";
25 led-mmc {
27 gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */
28 default-state = "on";
[all …]
Domap4-duovero-parlor.dts1 // SPDX-License-Identifier: GPL-2.0-only
5 /dts-v1/;
7 #include "omap4-duovero.dtsi"
9 #include <dt-bindings/input/input.h>
13 compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
20 compatible = "gpio-leds";
24 linux,default-trigger = "heartbeat";
29 compatible = "gpio-keys";
30 #address-cells = <1>;
31 #size-cells = <0>;
[all …]
Domap2420-h4.dts1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
11 compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
23 compatible = "cfi-flash";
24 linux,mtd-name = "intel,ge28f256l18b85";
25 #address-cells = <1>;
26 #size-cells = <1>;
28 bank-width = <2>;
30 gpmc,mux-add-data = <2>;
[all …]
Domap3-lilly-a83x.dtsi1 // SPDX-License-Identifier: GPL-2.0-or-later
9 model = "INCOstartec LILLY-A83X module (DM3730)";
10 compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3";
22 compatible = "gpio-leds";
25 label = "lilly-a83x::led1";
27 linux,default-trigger = "default-on";
33 compatible = "ti,omap-twl4030";
34 ti,model = "lilly-a83x";
40 compatible = "regulator-fixed";
41 regulator-name = "VCC3";
[all …]
Dam335x-nano.dts1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2013 Newflow Ltd - https://www.newflow.co.uk/
5 /dts-v1/;
15 cpu0-supply = <&dcdc2_reg>;
25 compatible = "gpio-leds";
30 default-state = "off";
36 pinctrl-names = "default";
37 pinctrl-0 = <&misc_pins>;
39 misc_pins: misc-pins {
40 pinctrl-single,pins = <
[all …]
Domap2420-n8x0-common.dtsi1 // SPDX-License-Identifier: GPL-2.0
11 stdout-path = &uart3;
16 compatible = "i2c-cbus-gpio";
21 #address-cells = <1>;
22 #size-cells = <0>;
25 interrupt-parent = <&gpio4>;
34 clock-frequency = <400000>;
44 clock-frequency = <400000>;
50 /* gpio-irq for dma: 26 */
53 #address-cells = <1>;
[all …]
Domap3-evm.dts1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
8 #include "omap3-evm-common.dtsi"
9 #include "omap3-evm-processor-common.dtsi"
13 compatible = "ti,omap3-evm", "ti,omap3430", "ti,omap3";
17 pinctrl-names = "default";
18 pinctrl-0 = <&hsusb2_2_pins>;
20 ehci_phy_pins: ehci-phy-pins {
21 pinctrl-single,pins = <
[all …]
Domap3-evm-37xx.dts1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
8 #include "omap3-evm-common.dtsi"
9 #include "omap3-evm-processor-common.dtsi"
13 compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
17 pinctrl-names = "default";
18 pinctrl-0 = <&hsusb2_2_pins>;
20 ehci_phy_pins: ehci-phy-pins {
21 pinctrl-single,pins = <
[all …]
Domap3-lilly-dbb056.dts1 // SPDX-License-Identifier: GPL-2.0-or-later
5 /dts-v1/;
7 #include "omap3-lilly-a83x.dtsi"
10 model = "INCOstartec LILLY-DBB056 (DM3730)";
11 …compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,…
15 vaux2: regulator-vaux2 {
16 compatible = "ti,twl4030-vaux2";
17 regulator-min-microvolt = <2800000>;
18 regulator-max-microvolt = <2800000>;
19 regulator-always-on;
[all …]
Ddm8148-evm.dts1 // SPDX-License-Identifier: GPL-2.0-only
2 /dts-v1/;
5 #include <dt-bindings/interrupt-controller/irq.h>
9 compatible = "ti,dm8148-evm", "ti,dm8148", "ti,dm814";
18 compatible = "regulator-fixed";
19 regulator-name = "vmmcsd_fixed";
20 regulator-min-microvolt = <3300000>;
21 regulator-max-microvolt = <3300000>;
26 phy-handle = <&ethphy0>;
27 phy-mode = "rgmii-id";
[all …]
/linux-6.14.4/Documentation/devicetree/bindings/memory-controllers/
Dti,gpmc-child.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/memory-controllers/ti,gpmc-child.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Tony Lindgren <[email protected]>
11 - Roger Quadros <[email protected]>
24 gpmc,sync-clk-ps:
28 # Chip-select signal timings corresponding to GPMC_CONFIG2:
29 gpmc,cs-on-ns:
33 gpmc,cs-rd-off-ns:
[all …]
Dst,stm32-fmc2-ebi-props.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi-props.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Christophe Kerello <[email protected]>
11 - Marek Vasut <[email protected]>
14 st,fmc2-ebi-cs-transaction-type:
33 st,fmc2-ebi-cs-cclk-enable:
36 during asynchronous and synchronous access. By default, the
37 FMC_CLK is only generated during synchronous access.
[all …]
Dti-aemif.txt4 provide a glue-less interface to a variety of asynchronous memory devices like
6 can be accessed at any given time via four chip selects with 64M byte access
11 Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
12 OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf
13 Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
17 - compatible: "ti,davinci-aemif"
18 "ti,keystone-aemif"
19 "ti,da850-aemif"
21 - reg: contains offset/length value for AEMIF control registers
24 - #address-cells: Must be 2. The partition number has to be encoded in the
[all …]
/linux-6.14.4/Documentation/arch/m68k/
Dbuddha-driver.rst8 ------------------------------------------------------------------------
11 Buddha-part of the Catweasel Zorro-II version
21 product number: 0 (42 for Catweasel Z-II)
23 Rom-vector: $1000
25 The card should be a Z-II board, size 64K, not for freemem
26 list, Rom-Vektor is valid, no second Autoconfig-board on the
30 as the Amiga Kickstart does: The lower nibble of the 8-Bit
36 otherwise your chance is only 1:16 to find the board :-).
38 The local memory-map is even active when mapped to $e8:
41 $0-$7e Autokonfig-space, see Z-II docs.
[all …]
/linux-6.14.4/include/linux/usb/
Disp1362.h1 /* SPDX-License-Identifier: GPL-2.0 */
3 * board initialization code should put one of these into dev->platform_data
15 /* On-chip overcurrent protection */
37 /* Inter-io delay (ns). The chip is picky about access timings; it
39 * 110ns delay between consecutive accesses to DATA_REG,
40 * 300ns delay between access to ADDR_REG and DATA_REG (registers)
41 * 462ns delay between access to ADDR_REG and DATA_REG (buffer memory)
/linux-6.14.4/include/linux/
Dnsproxy.h1 /* SPDX-License-Identifier: GPL-2.0 */
17 * A structure to contain pointers to all per-process
18 * namespaces - fs (mount), uts, network, sysvipc, etc.
20 * The pid namespace is an exception -- it's accessed using
47 struct cgroup_namespace *: &(__ns->ns), \
48 struct ipc_namespace *: &(__ns->ns), \
49 struct net *: &(__ns->ns), \
50 struct pid_namespace *: &(__ns->ns), \
51 struct mnt_namespace *: &(__ns->ns), \
52 struct time_namespace *: &(__ns->ns), \
[all …]

12345678910>>...25