| /linux-6.14.4/drivers/hsi/clients/ |
| D | hsi_char.c | 342 static int hsc_rx_set(struct hsi_client *cl, struct hsc_rx_config *rxc) in hsc_rx_set() argument
347 if ((rxc->mode != HSI_MODE_STREAM) && (rxc->mode != HSI_MODE_FRAME)) in hsc_rx_set()
349 if ((rxc->channels == 0) || (rxc->channels > HSC_DEVS)) in hsc_rx_set()
351 if (rxc->channels & (rxc->channels - 1)) in hsc_rx_set()
353 if ((rxc->flow != HSI_FLOW_SYNC) && (rxc->flow != HSI_FLOW_PIPE)) in hsc_rx_set()
356 cl->rx_cfg.mode = rxc->mode; in hsc_rx_set()
357 cl->rx_cfg.num_hw_channels = rxc->channels; in hsc_rx_set()
358 cl->rx_cfg.flow = rxc->flow; in hsc_rx_set()
364 if (rxc->mode == HSI_MODE_FRAME) in hsc_rx_set()
370 static inline void hsc_rx_get(struct hsi_client *cl, struct hsc_rx_config *rxc) in hsc_rx_get() argument
[all …]
|
| /linux-6.14.4/drivers/mfd/ |
| D | dln2.c | 193 struct dln2_rx_context *rxc; in dln2_transfer_complete() local
200 rxc = &rxs->slots[rx_slot]; in dln2_transfer_complete()
203 if (rxc->in_use && !rxc->urb) { in dln2_transfer_complete()
204 rxc->urb = urb; in dln2_transfer_complete()
205 complete(&rxc->done); in dln2_transfer_complete()
365 struct dln2_rx_context *rxc = &rxs->slots[*slot]; in find_free_slot() local
368 rxc->in_use = true; in find_free_slot()
398 struct dln2_rx_context *rxc; in free_rx_slot() local
406 rxc = &rxs->slots[slot]; in free_rx_slot()
407 rxc->in_use = false; in free_rx_slot()
[all …]
|
| /linux-6.14.4/Documentation/devicetree/bindings/net/ |
| D | micrel-ksz90x1.txt | 48 - rxc-skew-ps : Skew control of RXC pad
66 rxc-skew-ps=<0> actually results in -900 picoseconds adjustment.
74 The following 5-bit values table apply to rxc-skew-ps and txc-skew-ps.
137 - rxc-skew-ps : Skew control of RX clock pad
165 A negative value can be assigned as rxc-skew-psec = <(-100)>;.
171 - rxc-skew-psec : Skew control of RX clock pad
191 rxc-skew-ps = <1800>;
201 rxc-skew-ps = <1800>;
|
| D | mediatek,star-emac.yaml | 51 mediatek,rmii-rxc:
55 PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin.
57 mediatek,rxc-inverse:
60 If present, indicates that clock on RXC pad will be inversed.
|
| D | mediatek-dwmac.yaml | 96 mediatek,rmii-rxc:
100 PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin.
118 mediatek,rxc-inverse:
|
| D | engleder,tsnep.yaml | 95 rxc-skew-ps = <1080>;
115 rxc-skew-ps = <1080>;
|
| /linux-6.14.4/drivers/net/wireless/mediatek/mt76/mt76x0/ |
| D | initvals_init.h | 112 { MT_BBP(RXC, 1), 0x00000012 },
113 { MT_BBP(RXC, 2), 0x00000011 },
114 { MT_BBP(RXC, 3), 0x00000005 },
115 { MT_BBP(RXC, 4), 0x00000000 },
116 { MT_BBP(RXC, 5), 0xF977C4EC },
117 { MT_BBP(RXC, 7), 0x00000090 },
|
| /linux-6.14.4/drivers/spi/ |
| D | spi-oc-tiny.c | 49 unsigned int txc, rxc; member
120 hw->rxc = 0; in tiny_spi_txrx_bufs()
163 if (hw->rxc + 1 == hw->len) { in tiny_spi_irq()
166 hw->rxc++; in tiny_spi_irq()
171 hw->rxc++; in tiny_spi_irq()
|
| /linux-6.14.4/arch/arm/boot/dts/microchip/ |
| D | sama5d3xmb_gmac.dtsi | 24 rxc-skew-ps = <3000>;
38 rxc-skew-ps = <3000>;
|
| D | sama5d3xcm_cmp.dtsi | 59 rxc-skew-ps = <3000>;
73 rxc-skew-ps = <3000>;
|
| /linux-6.14.4/drivers/net/ethernet/stmicro/stmmac/ |
| D | dwmac-mediatek.c | 225 * and the property "rmii_rxc" indicates which pin(TXC/RXC) in mt2712_set_delay()
232 * to RXC pin, the reference clock will be adjusted in mt2712_set_delay()
233 * by RXC delay macro circuit. in mt2712_set_delay()
382 * and the property "rmii_rxc" indicates which pin(TXC/RXC) in mt8195_set_delay()
389 * to RXC pin, the reference clock will be adjusted in mt8195_set_delay()
390 * by RXC delay macro circuit. in mt8195_set_delay()
492 mac_delay->rx_inv = of_property_read_bool(plat->np, "mediatek,rxc-inverse"); in mediatek_dwmac_config_dt()
493 plat->rmii_rxc = of_property_read_bool(plat->np, "mediatek,rmii-rxc"); in mediatek_dwmac_config_dt()
|
| /linux-6.14.4/arch/arm/boot/dts/gemini/ |
| D | gemini-nas4220b.dts | 114 pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC";
|
| D | gemini-sq201.dts | 189 pins = "Y7 GMAC0 RXC";
205 pins = "Y11 GMAC1 RXC";
|
| D | gemini-sl93512r.dts | 197 pins = "T11 GMAC1 RXC";
213 pins = "T8 GMAC0 RXC";
|
| D | gemini-dlink-dns-313.dts | 243 pins = "T8 GMAC0 RXC";
247 pins = "T11 GMAC1 RXC";
|
| /linux-6.14.4/arch/powerpc/sysdev/ |
| D | tsi108_dev.c | 130 * "txc-rxc-delay-disable" property enables this in tsi108_eth_of_init()
135 if (of_property_read_bool(phy, "txc-rxc-delay-disable")) in tsi108_eth_of_init()
|
| /linux-6.14.4/Documentation/devicetree/bindings/sound/ |
| D | fsl,imx-asrc.yaml | 47 - const: rxc
172 dma-names = "rxa", "rxb", "rxc",
|
| /linux-6.14.4/arch/arm/boot/dts/nxp/imx/ |
| D | imx6dl-mba6.dtsi | 21 rxc-skew-ps = <1860>;
|
| D | imx6q-mba6.dtsi | 27 rxc-skew-ps = <1860>;
|
| /linux-6.14.4/drivers/tty/serial/ |
| D | men_z135_uart.c | 218 * Read RXC register from hardware and return current FIFO fill size.
224 u16 rxc; in get_rx_fifo_content() local
232 rxc = rxc_lo | (rxc_hi << 8); in get_rx_fifo_content()
234 return rxc; in get_rx_fifo_content()
390 /* It's save to write to IIR[7:6] RXC[9:8] */ in men_z135_intr()
|
| /linux-6.14.4/drivers/net/ethernet/micrel/ |
| D | ks8851_common.c | 364 struct ks8851_rxctrl *rxc = &ks->rxctrl; in ks8851_irq() local
367 ks8851_wrreg16(ks, KS_MAHTR0, rxc->mchash[0]); in ks8851_irq()
368 ks8851_wrreg16(ks, KS_MAHTR1, rxc->mchash[1]); in ks8851_irq()
369 ks8851_wrreg16(ks, KS_MAHTR2, rxc->mchash[2]); in ks8851_irq()
370 ks8851_wrreg16(ks, KS_MAHTR3, rxc->mchash[3]); in ks8851_irq()
372 ks8851_wrreg16(ks, KS_RXCR2, rxc->rxcr2); in ks8851_irq()
373 ks8851_wrreg16(ks, KS_RXCR1, rxc->rxcr1); in ks8851_irq()
|
| /linux-6.14.4/drivers/net/wan/ |
| D | pci200syn.c | 126 rxs |= CLK_LINE; /* RXC input */ in pci200_set_iface()
131 rxs |= CLK_LINE; /* RXC input */ in pci200_set_iface()
136 rxs |= CLK_LINE; /* RXC input */ in pci200_set_iface()
|
| D | c101.c | 153 rxs |= CLK_LINE_RX; /* RXC input */ in c101_set_iface()
158 rxs |= CLK_LINE_RX; /* RXC input */ in c101_set_iface()
163 rxs |= CLK_LINE_RX; /* RXC input */ in c101_set_iface()
|
| /linux-6.14.4/drivers/net/phy/ |
| D | microchip_t1.c | 1157 int rxc; in lan887x_config_rgmii_en() local
1170 rxc = phy_read_mmd(phydev, MDIO_MMD_VEND1, LAN887X_MIS_DLL_CFG_REG1); in lan887x_config_rgmii_en()
1171 if (rxc < 0) in lan887x_config_rgmii_en()
1172 return rxc; in lan887x_config_rgmii_en()
1186 rxc &= ~LAN887X_MIS_DLL_CONF; in lan887x_config_rgmii_en()
1190 rxc |= LAN887X_MIS_DLL_CONF; in lan887x_config_rgmii_en()
1194 rxc |= LAN887X_MIS_DLL_CONF; in lan887x_config_rgmii_en()
1198 rxc &= ~LAN887X_MIS_DLL_CONF; in lan887x_config_rgmii_en()
1207 LAN887X_MIS_DLL_CONF, rxc); in lan887x_config_rgmii_en()
|
| /linux-6.14.4/arch/powerpc/boot/dts/ |
| D | holly.dts | 69 txc-rxc-delay-disable;
75 txc-rxc-delay-disable;
|