/linux-6.14.4/drivers/misc/eeprom/ |
D | Kconfig | 16 ones like at24c64, 24lc02 or fm24c04: 18 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08, 19 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024, 24c2048 22 you configure as a 24c32 (32 kbit) or larger is NOT really a 23 24c16 (16 kbit) or smaller, and vice versa. Marking the chip 30 supported (24c16 and below, max 4 kByte).
|
D | at24.c | 35 /* Take always 8 addresses (24c00). */ 47 * MicroChip 24LC, etc) won't much matter for typical read/write access. 49 * would be the PCF8570, which acts like a 24c02 EEPROM (256 bytes). 59 * "SPD" data for DRAM sticks. Those only use 24c02 EEPROMs.) 67 * that this one handles write access and isn't restricted to 24c02 devices. 181 /* spd is a 24c02 in memory DIMMs */ 184 /* 24c02_vaio is a 24c02 on some Sony laptops */ 191 /* 24rf08 quirk is handled at i2c-core */ 216 /* identical to 24c08 ? */ 220 { "24c00", (kernel_ulong_t)&at24_data_24c00 }, [all …]
|
/linux-6.14.4/Documentation/devicetree/bindings/eeprom/ |
D | at24.yaml | 22 - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$" 23 - enum: ["microchip,24aa025e48", "microchip,24aa025e64"] 42 … - pattern: "^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|lc|mac)[0-9]+|spd)$" 43 - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$" 68 pattern: c16$ 111 - const: atmel,24c01 116 - const: atmel,24c02 123 - const: atmel,24c04 128 - const: atmel,24c16 131 - const: atmel,24c32 [all …]
|
/linux-6.14.4/arch/arm64/boot/dts/renesas/ |
D | r8a779f4-s4sk.dts | 50 gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; 107 compatible = "st,24c16", "atmel,24c16";
|
/linux-6.14.4/drivers/media/common/ |
D | ttpci-eeprom.c | 3 Retrieve encoded MAC address from 24C16 serial 2-wire EEPROM, 7 This card appear to have the 24C16 write protect held to ground,
|
/linux-6.14.4/Documentation/devicetree/bindings/i2c/ |
D | loongson,ls2x-i2c.yaml | 47 compatible = "atmel,24c16";
|
/linux-6.14.4/arch/loongarch/boot/dts/ |
D | loongson-2k0500-ref.dts | 64 compatible = "atmel,24c16";
|
D | loongson-2k1000-ref.dts | 82 compatible = "atmel,24c16";
|
/linux-6.14.4/arch/arm/boot/dts/ti/omap/ |
D | am335x-moxa-uc-2100-common.dtsi | 103 compatible = "atmel,24c16";
|
D | am335x-moxa-uc-8100-common.dtsi | 202 compatible = "atmel,24c16";
|
D | am335x-boneblue.dts | 48 gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; 123 …AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */ 317 compatible = "atmel,24c256"; 558 "I2C0_SCL", /* C16 */
|
/linux-6.14.4/arch/arm/boot/dts/allwinner/ |
D | sun4i-a10-olinuxino-lime.dts | 149 compatible = "atmel,24c16";
|
D | sun7i-a20-olinuxino-lime.dts | 142 compatible = "atmel,24c16";
|
D | sun5i-a10s-olinuxino-micro.dts | 134 compatible = "atmel,24c16";
|
D | sun7i-a20-olinuxino-lime2.dts | 143 compatible = "atmel,24c16";
|
D | sun7i-a20-olimex-som204-evb.dts | 139 compatible = "atmel,24c16";
|
D | sun7i-a20-olinuxino-micro.dts | 150 compatible = "atmel,24c16";
|
/linux-6.14.4/drivers/scsi/sym53c8xx_2/ |
D | sym_nvram.c | 228 * 24C16 EEPROM reading. 505 /* probe the 24c16 and read the SYMBIOS 24c16 area */ in sym_read_Symbios_nvram()
|
/linux-6.14.4/drivers/pinctrl/aspeed/ |
D | pinctrl-aspeed-g4.c | 181 #define I2C11_DESC SIG_DESC_SET(SCU90, 24) 228 #define A18 24 264 #define C16 28 macro 265 SIG_EXPR_LIST_DECL_SINGLE(C16, SD2DAT2, SD2, SD2_DESC); 268 SIG_EXPR_LIST_DECL_DUAL(C16, GPID4IN, GPID4, GPID); 269 PIN_DECL_2(C16, GPIOD4, SD2DAT2, GPID4IN); 278 FUNC_GROUP_DECL(GPID4, C16, B16); 297 FUNC_GROUP_DECL(SD2, A18, D16, B17, A17, C16, B16, A16, E15); 298 FUNC_GROUP_DECL(GPID, A18, D16, B17, A17, C16, B16, A16, E15); 383 SSSF_PIN_DECL(D18, GPIOF0, NCTS4, SIG_DESC_SET(SCU80, 24)); [all …]
|
D | pinctrl-aspeed-g6.c | 49 #define SCU690 0x690 /* Multi-function Pin Control #24 */ 222 #define F23 24 223 SIG_EXPR_LIST_DECL_SESG(F23, RGMII3RXD0, RGMII3, SIG_DESC_SET(SCU410, 24), 225 SIG_EXPR_LIST_DECL_SESG(F23, RMII3RXD0, RMII3, SIG_DESC_SET(SCU410, 24), 496 SIG_EXPR_LIST_DECL_SESG(A18, SGPM1CLK, SGPM1, SIG_DESC_SET(SCU414, 24)); 562 #define C16 68 macro 563 SIG_EXPR_LIST_DECL_SESG(C16, MTDO, JTAGM, SIG_DESC_SET(SCU418, 4)); 564 PIN_DECL_1(C16, GPIOI4, MTDO); 566 FUNC_GROUP_DECL(JTAGM, D17, A16, E17, D16, C16); 678 SIG_EXPR_LIST_DECL_SESG(D15, SCL9, I2C9, SIG_DESC_SET(SCU418, 24)); [all …]
|
D | pinctrl-aspeed-g5.c | 163 #define I2C11_DESC SIG_DESC_SET(SCU90, 24) 206 #define F19 24 366 SIG_EXPR_LIST_DECL_SINGLE(J19, NCTS4, NCTS4, SIG_DESC_SET(SCU80, 24)); 540 #define C16 67 macro 543 SIG_EXPR_LIST_DECL_DUAL(C16, SYSMISO, SPI1DEBUG, SPI1PASSTHRU); 544 PIN_DECL_1(C16, GPIOI3, SYSMISO); 597 FUNC_GROUP_DECL(SPI1DEBUG, C18, E15, B16, C16, B15, C15, A14, A15); 598 FUNC_GROUP_DECL(SPI1PASSTHRU, C18, E15, B16, C16, B15, C15, A14, A15); 750 #define Y1_DESC SIG_DESC_SET(SCU84, 24) 996 SSSF_PIN_DECL(AA19, GPIOR0, FWSPICS1, SIG_DESC_SET(SCU88, 24), COND2); [all …]
|
/linux-6.14.4/arch/arm/boot/dts/renesas/ |
D | r7s72100-rskrza1.dts | 149 compatible = "renesas,r1ex24016", "atmel,24c16";
|
/linux-6.14.4/drivers/net/ethernet/freescale/fs_enet/ |
D | mac-fcc.c | 56 #define C16(_p, _m, _v) W16(_p, _m, R16(_p, _m) & ~(_v)) macro 270 W32(ep, fen_genfcc.fcc_rstate, (CPMFCR_GBL | CPMFCR_EB) << 24); in restart() 271 W32(ep, fen_genfcc.fcc_tstate, (CPMFCR_GBL | CPMFCR_EB) << 24); in restart() 439 C16(fccp, fcc_fccm, FCC_NAPI_EVENT_MSK); in napi_disable_fs()
|
/linux-6.14.4/arch/arm64/boot/dts/ti/ |
D | k3-am642-phyboard-electra-rdk.dts | 67 interrupts = <24 0 2>, <25 1 3>; 292 AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ 358 compatible = "atmel,24c02";
|
/linux-6.14.4/Documentation/scsi/ |
D | ChangeLog.sym53c8xx | 64 Sun Sep 24 21:30 2000 Gerard Roudier ([email protected]) 115 Mon Apr 24 12:00 2000 Gerard Roudier ([email protected]) 215 - Add NVRAM support for Tekram boards that use 24C16 EEPROM. 432 Sun Jan 24 18:00 1999 Gerard Roudier ([email protected]) 468 Thu Dec 3 24:00 1998 Gerard Roudier ([email protected]) 488 Tue Nov 24 23:00 1998 Gerard Roudier ([email protected]) 548 Sat Oct 24 16H00 1998 Gerard Roudier ([email protected])
|