| /linux-6.14.4/arch/arm/boot/dts/ti/omap/ |
| D | omap3430-sdp.dts | 15 reg = <0x80000000 0x10000000>; /* 256 MB */
51 <1 0 0x28000000 0x1000000>, /* CS1: 16MB for NAND */
52 <2 0 0x20000000 0x1000000>; /* CS2: 16MB for OneNAND */
70 gpmc,oe-off-ns = <168>;
72 gpmc,we-off-ns = <168>;
|
| D | omap3-devkit8000-common.dtsi | 12 reg = <0x80000000 0x10000000>; /* 256 MB */
219 ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
220 6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */
298 gpmc,oe-off-ns = <168>;
300 gpmc,we-off-ns = <168>;
|
| /linux-6.14.4/Documentation/devicetree/bindings/bus/ |
| D | qcom,ebi2.yaml | 28 memory is referred to as "Chip Peripheral SS FPB0" and is 168MB big.
31 CS0 GPIO134 0x1a800000-0x1b000000 (8MB)
32 CS1 GPIO39 (A) / GPIO123 (B) 0x1b000000-0x1b800000 (8MB)
33 CS2 GPIO40 (A) / GPIO124 (B) 0x1b800000-0x1c000000 (8MB)
34 CS3 GPIO133 0x1d000000-0x25000000 (128 MB)
35 CS4 GPIO132 0x1c800000-0x1d000000 (8MB)
36 CS5 GPIO131 0x1c000000-0x1c800000 (8MB)
|
| /linux-6.14.4/Documentation/arch/riscv/ |
| D | vm-layout.rst | 50 ffffffc4fea00000 | -236 GB | ffffffc4feffffff | 6 MB | fixmap
51 ffffffc4ff000000 | -236 GB | ffffffc4ffffffff | 16 MB | PCI io
54 … ffffffd600000000 | -168 GB | fffffff5ffffffff | 128 GB | direct mapping of all physical memory
87 ffff8d7ffea00000 | -114.5 TB | ffff8d7ffeffffff | 6 MB | fixmap
88 ffff8d7fff000000 | -114.5 TB | ffff8d7fffffffff | 16 MB | PCI io
123 ff1bfffffea00000 | -57 PB | ff1bfffffeffffff | 6 MB | fixmap
124 ff1bffffff000000 | -57 PB | ff1bffffffffffff | 16 MB | PCI io
|
| /linux-6.14.4/drivers/gpu/drm/i915/gem/ |
| D | i915_gem_domain.c | 21 #define VTD_GUARD (168u * I915_GTT_PAGE_SIZE) /* 168 or tile-row PTE padding */
168 mb(); in i915_gem_object_set_to_wc_domain()
230 mb(); in i915_gem_object_set_to_gtt_domain()
|
| /linux-6.14.4/drivers/staging/sm750fb/ |
| D | ddk750_chip.c | 135 * The maximum frequency the engine can run is 168MHz.
186 /* sm750le only use 64 mb memory*/ in ddk750_get_vm_size()
|
| /linux-6.14.4/arch/arm/boot/dts/aspeed/ |
| D | aspeed-bmc-facebook-harma.dts | 231 // MB NIC FRU
478 //MB FRU
645 "power-host-good","reset-control-mb-mux",
701 /*K4-K7 line 168-175*/
|
| /linux-6.14.4/arch/arm64/boot/dts/arm/ |
| D | fvp-base-revc.dts | 183 /* 8 MB of designated video RAM */
239 interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
|
| D | juno-base.dtsi | 964 /* last 16MB of the first memory area is reserved for secure world use by firmware */
983 <0 0 11 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
994 interrupt-map = <0 0 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
|
| /linux-6.14.4/Documentation/arch/x86/ |
| D | resctrl.rst | 138 Memory bandwidth(MB) subdirectory contains the following files
429 a task in a monitor group showing 3 MB of cache occupancy. If you move
431 groups you will likely see that the old group is still showing 3 MB and
520 of SNC nodes per L3 cache. E.g. with a 100MB cache on a system with 10-bit
521 allocation masks each bit normally represents 10MB. With SNC mode enabled
522 with two SNC nodes per L3 cache, each bit only represents 5MB.
531 and can be looked up through "info/MB/min_bandwidth". The bandwidth
533 be looked up at "info/MB/bandwidth_gran". The available bandwidth
617 MB:<cache_id0>=bandwidth0;<cache_id1>=bandwidth1;...
625 MB:<cache_id0>=bw_MiBps0;<cache_id1>=bw_MiBps1;...
[all …]
|
| /linux-6.14.4/drivers/ssb/ |
| D | driver_pcicore.c | 302 lat = 168; in ssb_pcicore_fixup_pcibridge()
353 /* 64MB I/O window */ in ssb_pcicore_init_hostmode()
356 /* 64MB config space */ in ssb_pcicore_init_hostmode()
|
| /linux-6.14.4/Documentation/scsi/ |
| D | ncr53c8xx.rst | 172 |810 | N | N | FAST10 | 10 MB/s | Y | N |
174 |810A | N | N | FAST10 | 10 MB/s | Y | Y |
176 |815 | Y | N | FAST10 | 10 MB/s | Y | N |
178 |825 | Y | Y | FAST10 | 20 MB/s | Y | N |
180 |825A | Y | Y | FAST10 | 20 MB/s | Y | Y |
182 |860 | N | N | FAST20 | 20 MB/s | Y | Y |
184 |875 | Y | Y | FAST20 | 40 MB/s | Y | Y |
186 |876 | Y | Y | FAST20 | 40 MB/s | Y | Y |
188 |895 | Y | Y | FAST40 | 80 MB/s | Y | Y |
190 |895A | Y | Y | FAST40 | 80 MB/s | Y | Y |
[all …]
|
| /linux-6.14.4/drivers/hv/ |
| D | hv_balloon.c | 1055 pr_info("Max. dynamic memory size: %llu MB\n", in process_info()
1070 #define MB2PAGES(mb) ((mb) << (20 - PAGE_SHIFT)) in compute_balloon_floor() argument
1077 * 512 168 (1/4) in compute_balloon_floor()
1608 /* page reporting for pages 2MB or higher */ in hv_free_page_report()
1617 /* Page reporting for pages below 2MB */ in hv_free_page_report()
|
| /linux-6.14.4/arch/x86/ |
| D | Kconfig | 579 enable more than ~168 cores.
2153 so it can be loaded someplace besides the default 1MB.
2179 between 16MB and the top of physical memory (up to 64TB). The
2180 virtual address will be randomized from 16MB up to 1GB (9 bits
2185 randomized together. They will be randomized from 16MB up to
2186 512MB (8 bits of entropy).
2194 minimum of 2MB. As a result, only 10 bits of entropy are
2834 all but the first 4 MB of RAM)
|
| /linux-6.14.4/include/uapi/drm/ |
| D | habanalabs_accel.h | 33 #define TS_MAX_ELEMENTS_NUM (1 << 20) /* 1MB */
369 GAUDI2_QUEUE_ID_NIC_3_0 = 168,
1249 * (e.g. 0x2100000 means that 1MB and 32MB pages are supported).
1402 /* 2MB minus 32 bytes for 2xMSG_PROT */
|
| /linux-6.14.4/drivers/pcmcia/ |
| D | yenta_socket.c | 615 * max 4 MB, min 16 kB. We try very hard to not get below
1061 config_writeb(socket, PCI_LATENCY_TIMER, 168); in yenta_config_init()
|
| /linux-6.14.4/arch/powerpc/xmon/ |
| D | ppc-opc.c | 275 /* The MB field in an M form instruction. */
276 #define MB CRB macro
464 /* The MB and ME fields in an M form instruction expressed a single
472 /* The MB or ME field in an MD or MDS form instruction. The high
1555 /* The MB and ME fields in an M form instruction expressed as a single
1567 int mb, me, mx, count, last; in insert_mbe() local
1577 mb = 0; in insert_mbe()
1585 /* mb: location of last 0->1 transition */ in insert_mbe()
1594 mb = mx; in insert_mbe()
1610 return insn | (mb << 6) | ((me - 1) << 1); in insert_mbe()
[all …]
|
| /linux-6.14.4/drivers/input/keyboard/ |
| D | atkbd.c | 121 0,139,172,163,165,115,152,172,166,140,160,154,113,114,167,168,
675 mb(); in atkbd_schedule_event_work()
|
| /linux-6.14.4/mm/ |
| D | slab_common.c | 738 2, /* 168 */
819 * kmalloc_index() supports up to 2^21=2MB, so the final entry of the table is
|
| /linux-6.14.4/drivers/net/wireless/intel/iwlwifi/dvm/ |
| D | rs.c | 166 {0, 0, 0, 0, 46, 0, 82, 110, 132, 168, 192, 202, 210}, /* SGI */
3223 "Bit Rate= %d Mb/s\n", in rs_sta_dbgfs_rate_scale_data_read()
3227 "Bit Rate= %d Mb/s\n", in rs_sta_dbgfs_rate_scale_data_read()
|
| /linux-6.14.4/drivers/video/fbdev/ |
| D | atafb.c | 218 8, 136, 72, 200, 40, 168, 104, 232, 24, 152, 88, 216, 56, 184, 120, 248,
1139 /* Is video bus bandwidth (32MB/s) too low for this resolution? */ in falcon_decode_var()
|
| /linux-6.14.4/drivers/net/wireless/intel/iwlegacy/ |
| D | commands.h | 1779 * For example, if you set 9MB (PLCP 0x0f) as the first
2052 * SGI SISO 20MHz: 0 0 0 0 46 46 82 110 132 168 192 202 211
|