/linux-6.14.4/arch/arm/mach-imx/ |
D | hardware.h | 21 (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0) 35 * whole address space to [0xf4000000, 0xf5ffffff]. So [0xf6000000,0xfeffffff] 41 * IO 0x00200000+0x100000 -> 0xf4000000+0x100000 43 * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000 44 * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000 45 * X_MEMC 0xdf000000+0x004000 -> 0xf5f00000+0x004000 47 * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 48 * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 49 * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 51 * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000 [all …]
|
/linux-6.14.4/arch/arm64/boot/dts/freescale/ |
D | fsl-ls1028a-kontron-sl28.dts | 85 reg = <0x5>; 95 nvmem-cells = <&base_mac_address 0>; 118 flash@0 { 122 reg = <0>; 132 partition@0 { 133 reg = <0x000000 0x010000>; 139 reg = <0x010000 0x1d0000>; 145 reg = <0x200000 0x010000>; 150 reg = <0x210000 0x1d0000>; 155 reg = <0x3e0000 0x020000>; [all …]
|
/linux-6.14.4/arch/arm/boot/dts/ti/omap/ |
D | omap5-l4-abe.dtsi | 1 &l4_abe { /* 0x40100000 */ 3 reg = <0x40100000 0x400>, 4 <0x40100400 0x400>; 10 ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */ 11 <0x49000000 0x49000000 0x100000>; 12 segment@0 { /* 0x40100000 */ 18 <0x00000000 0x00000000 0x000400>, /* ap 0 */ 19 <0x00000400 0x00000400 0x000400>, /* ap 1 */ 20 <0x00022000 0x00022000 0x001000>, /* ap 2 */ 21 <0x00023000 0x00023000 0x001000>, /* ap 3 */ [all …]
|
D | omap4-l4-abe.dtsi | 1 &l4_abe { /* 0x40100000 */ 3 reg = <0x40100000 0x400>, 4 <0x40100400 0x400>; 10 ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */ 11 <0x49000000 0x49000000 0x100000>; 12 segment@0 { /* 0x40100000 */ 18 <0x00000000 0x00000000 0x000400>, /* ap 0 */ 19 <0x00000400 0x00000400 0x000400>, /* ap 1 */ 20 <0x00022000 0x00022000 0x001000>, /* ap 2 */ 21 <0x00023000 0x00023000 0x001000>, /* ap 3 */ [all …]
|
D | omap4460.dtsi | 12 cpu0: cpu@0 { 32 reg = <0x4a002260 0x4 33 0x4a00232C 0x4 34 0x4a002378 0x18>; 36 interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */ 39 #thermal-sensor-cells = <0>; 45 reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>, 46 <0x4A002268 0x4>; 52 1025000 0 0 0 0 0 53 1200000 0 0 0 0 0 [all …]
|
/linux-6.14.4/drivers/gpu/drm/nouveau/nvkm/subdev/vfn/ |
D | gv100.c | 28 .user = { 0x810000, 0x010000, { -1, -1, VOLTA_USERMODE_A } }, 35 return nvkm_vfn_new_(&gv100_vfn, device, type, inst, 0, pvfn); in gv100_vfn_new()
|
D | ga100.c | 30 { NVKM_ENGINE_DISP , 0, 4, 0x04000000, true }, 31 { NVKM_SUBDEV_GPIO , 0, 4, 0x00200000, true }, 32 { NVKM_SUBDEV_I2C , 0, 4, 0x00200000, true }, 33 { NVKM_SUBDEV_PRIVRING, 0, 4, 0x40000000, true }, 41 .user = { 0x030000, 0x010000, { -1, -1, AMPERE_USERMODE_A } }, 49 return r535_vfn_new(&ga100_vfn, device, type, inst, 0xb80000, pvfn); in ga100_vfn_new() 51 return nvkm_vfn_new_(&ga100_vfn, device, type, inst, 0xb80000, pvfn); in ga100_vfn_new()
|
D | tu102.c | 33 nvkm_wr32(vfn->subdev.device, vfn->addr.priv + 0x1000 + (leaf * 4), mask); in tu102_vfn_intr_reset() 41 nvkm_wr32(vfn->subdev.device, vfn->addr.priv + 0x1200 + (leaf * 4), mask); in tu102_vfn_intr_allow() 49 nvkm_wr32(vfn->subdev.device, vfn->addr.priv + 0x1400 + (leaf * 4), mask); in tu102_vfn_intr_block() 57 nvkm_wr32(vfn->subdev.device, vfn->addr.priv + 0x1608, 0x0000000f); in tu102_vfn_intr_rearm() 65 nvkm_wr32(vfn->subdev.device, vfn->addr.priv + 0x1610, 0x0000000f); in tu102_vfn_intr_unarm() 73 u32 intr_top = nvkm_rd32(device, vfn->addr.priv + 0x1600); in tu102_vfn_intr_pending() 74 int pending = 0, leaf; in tu102_vfn_intr_pending() 76 for (leaf = 0; leaf < 8; leaf++) { in tu102_vfn_intr_pending() 78 intr->stat[leaf] = nvkm_rd32(device, vfn->addr.priv + 0x1000 + (leaf * 4)); in tu102_vfn_intr_pending() 82 intr->stat[leaf] = 0; in tu102_vfn_intr_pending() [all …]
|
/linux-6.14.4/arch/mips/include/asm/mach-rc32434/ |
D | rb.h | 10 #define REGBASE 0x18000000 12 #define UART0BASE 0x58000 14 #define DEV0BASE 0x010000 15 #define DEV0MASK 0x010004 16 #define DEV0C 0x010008 17 #define DEV0T 0x01000C 18 #define DEV1BASE 0x010010 19 #define DEV1MASK 0x010014 20 #define DEV1C 0x010018 21 #define DEV1TC 0x01001C [all …]
|
/linux-6.14.4/Documentation/devicetree/bindings/arm/ |
D | arm,juno-fpga-apb-regs.yaml | 31 "^led@[0-9a-f]+,[0-9a-f]$": 47 reg = <0x010000 0x1000>; 48 ranges = <0x0 0x10000 0x1000>; 52 led@8,0 { 54 reg = <0x08 0x04>; 55 offset = <0x08>; 56 mask = <0x01>; 57 label = "vexpress:0";
|
/linux-6.14.4/Documentation/hwmon/ |
D | w83791d.rst | 10 Addresses scanned: I2C 0x2c - 0x2f 40 (default 0) 49 (default 0) 51 Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default 56 a certain chip. Example usage is `force_subclients=0,0x2f,0x4a,0x4b` 57 to force the subclients of chip 0x2f on bus 0 to i2c addresses 58 0x4a and 0x4b. 90 set for each fan separately. Valid values range from 0 (stop) to 255 (full). 157 in0 (VCORE) 0x000001 0x000001 158 in1 (VINR0) 0x000002 0x002000 <== mismatch [all …]
|
/linux-6.14.4/arch/mips/boot/dts/qca/ |
D | ar9132_tl_wr1043nd_v1.dts | 13 memory@0 { 15 reg = <0x0 0x2000000>; 20 #clock-cells = <0>; 27 button-0 { 44 led-0 { 87 flash@0 { 91 reg = <0>; 94 partition@0 { 96 reg = <0x000000 0x020000>; 101 reg = <0x020000 0x7D0000>; [all …]
|
/linux-6.14.4/drivers/clk/imx/ |
D | clk-imx8-acm.c | 135 … IMX_ADMA_ACM_AUD_CLK0_SEL, imx8qm_aud_clk_sels, ARRAY_SIZE(imx8qm_aud_clk_sels), 0x000000, 0, 5 }, 136 … IMX_ADMA_ACM_AUD_CLK1_SEL, imx8qm_aud_clk_sels, ARRAY_SIZE(imx8qm_aud_clk_sels), 0x010000, 0, 5 }, 137 …MX_ADMA_ACM_MCLKOUT0_SEL, imx8qm_mclk_out_sels, ARRAY_SIZE(imx8qm_mclk_out_sels), 0x020000, 0, 3 }, 138 …MX_ADMA_ACM_MCLKOUT1_SEL, imx8qm_mclk_out_sels, ARRAY_SIZE(imx8qm_mclk_out_sels), 0x030000, 0, 3 }, 139 …SRC0_MUX_CLK_SEL, imx8qm_asrc_mux_clk_sels, ARRAY_SIZE(imx8qm_asrc_mux_clk_sels), 0x040000, 0, 2 }, 140 …el", IMX_ADMA_ACM_ESAI0_MCLK_SEL, imx8qm_mclk_sels, ARRAY_SIZE(imx8qm_mclk_sels), 0x060000, 0, 2 }, 141 …el", IMX_ADMA_ACM_ESAI1_MCLK_SEL, imx8qm_mclk_sels, ARRAY_SIZE(imx8qm_mclk_sels), 0x070000, 0, 2 }, 142 …sel", IMX_ADMA_ACM_SAI0_MCLK_SEL, imx8qm_mclk_sels, ARRAY_SIZE(imx8qm_mclk_sels), 0x0E0000, 0, 2 }, 143 …sel", IMX_ADMA_ACM_SAI1_MCLK_SEL, imx8qm_mclk_sels, ARRAY_SIZE(imx8qm_mclk_sels), 0x0F0000, 0, 2 }, 144 …sel", IMX_ADMA_ACM_SAI2_MCLK_SEL, imx8qm_mclk_sels, ARRAY_SIZE(imx8qm_mclk_sels), 0x100000, 0, 2 }, [all …]
|
/linux-6.14.4/Documentation/devicetree/bindings/net/ |
D | nxp,netc-blk-ctrl.yaml | 54 "^pcie@[0-9a-f]+$": 75 reg = <0x0 0x4cde0000 0x0 0x10000>, 76 <0x0 0x4cdf0000 0x0 0x10000>, 77 <0x0 0x4c81000c 0x0 0x18>; 88 reg = <0x0 0x4cb00000 0x0 0x100000>; 92 bus-range = <0x1 0x1>; 93 ranges = <0x82000000 0x0 0x4cce0000 0x0 0x4cce0000 0x0 0x20000 94 0xc2000000 0x0 0x4cd10000 0x0 0x4cd10000 0x0 0x10000>; 96 mdio@0,0 { 98 reg = <0x010000 0 0 0 0>; [all …]
|
/linux-6.14.4/drivers/scsi/aic94xx/ |
D | aic94xx_sds.h | 17 #define FLASH_MANUF_ID_AMD 0x01 18 #define FLASH_MANUF_ID_ST 0x20 19 #define FLASH_MANUF_ID_FUJITSU 0x04 20 #define FLASH_MANUF_ID_MACRONIX 0xC2 21 #define FLASH_MANUF_ID_INTEL 0x89 22 #define FLASH_MANUF_ID_UNKNOWN 0xFF 24 #define FLASH_DEV_ID_AM29LV008BT 0x3E 25 #define FLASH_DEV_ID_AM29LV800DT 0xDA 26 #define FLASH_DEV_ID_STM29W800DT 0xD7 27 #define FLASH_DEV_ID_STM29LV640 0xDE [all …]
|
/linux-6.14.4/include/linux/ |
D | qnx6_fs.h | 17 #define QNX6_FILE_DIRECTORY 0x01 18 #define QNX6_FILE_DELETED 0x02 19 #define QNX6_FILE_NORMAL 0x03 21 #define QNX6_SUPERBLOCK_SIZE 0x200 /* superblock always is 512 bytes */ 22 #define QNX6_SUPERBLOCK_AREA 0x1000 /* area reserved for superblock */ 23 #define QNX6_BOOTBLOCK_SIZE 0x2000 /* heading bootblock area */ 24 #define QNX6_DIR_ENTRY_SIZE 0x20 /* dir entry size of 32 bytes */ 25 #define QNX6_INODE_SIZE 0x80 /* each inode is 128 bytes */ 36 #define QNX6_MOUNT_MMI_FS 0x010000 /* mount as Audi MMI 3G fs */
|
/linux-6.14.4/drivers/ntb/hw/intel/ |
D | ntb_hw_gen4.h | 9 #define PCI_DEVICE_REVISION_ICX_MIN 0x2 10 #define PCI_DEVICE_REVISION_ICX_MAX 0xF 14 #define GEN4_IMBAR23SZ_OFFSET 0x00c4 15 #define GEN4_IMBAR45SZ_OFFSET 0x00c5 16 #define GEN4_EMBAR23SZ_OFFSET 0x00c6 17 #define GEN4_EMBAR45SZ_OFFSET 0x00c7 18 #define GEN4_DEVCTRL_OFFSET 0x0048 19 #define GEN4_DEVSTS_OFFSET 0x004a 20 #define GEN4_UNCERRSTS_OFFSET 0x0104 21 #define GEN4_CORERRSTS_OFFSET 0x0110 [all …]
|
/linux-6.14.4/arch/m68k/include/asm/ |
D | amigayle.h | 25 #define GAYLE_RAM (0x600000+zTwoBase) 26 #define GAYLE_RAMSIZE (0x400000) 27 #define GAYLE_ATTRIBUTE (0xa00000+zTwoBase) 28 #define GAYLE_ATTRIBUTESIZE (0x020000) 29 #define GAYLE_IO (0xa20000+zTwoBase) /* 16bit and even 8bit registers */ 30 #define GAYLE_IOSIZE (0x010000) 31 #define GAYLE_IO_8BITODD (0xa30000+zTwoBase) /* odd 8bit registers */ 40 u_char pad0[0x1000-1]; 43 u_char pad1[0x1000-1]; 46 u_char pad2[0x1000-1]; [all …]
|
/linux-6.14.4/arch/powerpc/include/asm/nohash/ |
D | pte-e500.h | 13 #define _PAGE_PRESENT 0x000001 /* software: pte contains a translation */ 14 #define _PAGE_SW1 0x000002 15 #define _PAGE_BAP_SR 0x000004 16 #define _PAGE_BAP_UR 0x000008 17 #define _PAGE_BAP_SW 0x000010 18 #define _PAGE_BAP_UW 0x000020 19 #define _PAGE_BAP_SX 0x000040 20 #define _PAGE_BAP_UX 0x000080 21 #define _PAGE_PSIZE_MSK 0x000f00 22 #define _PAGE_TSIZE_4K 0x000100 [all …]
|
/linux-6.14.4/tools/include/uapi/asm-generic/ |
D | mman-common.h | 10 #define PROT_READ 0x1 /* page can be read */ 11 #define PROT_WRITE 0x2 /* page can be written */ 12 #define PROT_EXEC 0x4 /* page can be executed */ 13 #define PROT_SEM 0x8 /* page may be used for atomic ops */ 14 /* 0x10 reserved for arch-specific use */ 15 /* 0x20 reserved for arch-specific use */ 16 #define PROT_NONE 0x0 /* page can not be accessed */ 17 #define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ 18 #define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ 20 /* 0x01 - 0x03 are defined in linux/mman.h */ [all …]
|
/linux-6.14.4/include/uapi/asm-generic/ |
D | mman-common.h | 10 #define PROT_READ 0x1 /* page can be read */ 11 #define PROT_WRITE 0x2 /* page can be written */ 12 #define PROT_EXEC 0x4 /* page can be executed */ 13 #define PROT_SEM 0x8 /* page may be used for atomic ops */ 14 /* 0x10 reserved for arch-specific use */ 15 /* 0x20 reserved for arch-specific use */ 16 #define PROT_NONE 0x0 /* page can not be accessed */ 17 #define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ 18 #define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ 20 /* 0x01 - 0x03 are defined in linux/mman.h */ [all …]
|
/linux-6.14.4/arch/powerpc/boot/dts/ |
D | pdm360ng.dts | 23 reg = <0x00000000 0x20000000>; // 512MB at 0 27 bank-width = <0x1>; 28 chips = <0x1>; 30 partition@0 { 32 reg = <0x0 0x40000000>; 37 ranges = <0x0 0x0 0xf0000000 0x10000000 /* Flash */ 38 0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */ 40 flash@0,0 { 42 reg = <0 0x00000000 0x08000000 43 0 0x08000000 0x08000000>; [all …]
|
/linux-6.14.4/arch/arm64/boot/dts/ti/ |
D | k3-j784s4-main.dtsi | 11 reg = <0x00 0x67800000 0x00 0x00080000>, 12 <0x00 0x67e00000 0x00 0x0000c000>; 18 ti,sci-proc-ids = <0x33 0xff>; 24 reg = <0x00 0x02920000 0x00 0x1000>, 25 <0x00 0x02927000 0x00 0x400>, 26 <0x00 0x0e000000 0x00 0x00800000>, 27 <0x44 0x00000000 0x00 0x00001000>; 28 ranges = <0x01000000 0x0 0x00001000 0x44 0x00001000 0x0 0x0010000>, 29 <0x02000000 0x0 0x00011000 0x44 0x00011000 0x0 0x7fef000>; 37 clocks = <&k3_clks 334 0>; [all …]
|
/linux-6.14.4/sound/drivers/vx/ |
D | vx_cmd.c | 19 [CMD_VERSION] = { 0x010000, 2, RMH_SSIZE_FIXED, 1 }, 20 [CMD_SUPPORTED] = { 0x020000, 1, RMH_SSIZE_FIXED, 2 }, 21 [CMD_TEST_IT] = { 0x040000, 1, RMH_SSIZE_FIXED, 1 }, 22 [CMD_SEND_IRQA] = { 0x070001, 1, RMH_SSIZE_FIXED, 0 }, 23 [CMD_IBL] = { 0x080000, 1, RMH_SSIZE_FIXED, 4 }, 24 [CMD_ASYNC] = { 0x0A0000, 1, RMH_SSIZE_ARG, 0 }, 25 [CMD_RES_PIPE] = { 0x400000, 1, RMH_SSIZE_FIXED, 0 }, 26 [CMD_FREE_PIPE] = { 0x410000, 1, RMH_SSIZE_FIXED, 0 }, 27 [CMD_CONF_PIPE] = { 0x42A101, 2, RMH_SSIZE_FIXED, 0 }, 28 [CMD_ABORT_CONF_PIPE] = { 0x42A100, 2, RMH_SSIZE_FIXED, 0 }, [all …]
|
/linux-6.14.4/drivers/pci/controller/ |
D | pcie-rcar.h | 12 #define PCIECAR 0x000010 13 #define PCIECCTLR 0x000018 15 #define TYPE0 (0 << 8) 17 #define PCIECDR 0x000020 18 #define PCIEMSR 0x000028 19 #define PCIEINTXR 0x000400 21 #define PCIEPHYSR 0x0007f0 22 #define PHYRDY BIT(0) 23 #define PCIEMSITXR 0x000840 26 #define PCIETCTLR 0x02000 [all …]
|