Searched +full:0 +full:x0002000 (Results 1 – 11 of 11) sorted by relevance
/linux-6.14.4/tools/perf/pmu-events/arch/riscv/sifive/u74/ |
D | instructions.json | 4 "EventCode": "0x0000100", 9 "EventCode": "0x0000200", 14 "EventCode": "0x0000400", 19 "EventCode": "0x0000800", 24 "EventCode": "0x0001000", 29 "EventCode": "0x0002000", 34 "EventCode": "0x0004000", 39 "EventCode": "0x0008000", 44 "EventCode": "0x0010000", 49 "EventCode": "0x0020000", [all …]
|
/linux-6.14.4/drivers/video/fbdev/ |
D | ffb.c | 64 #define FFB_SFB8R_VOFF 0x00000000 65 #define FFB_SFB8G_VOFF 0x00400000 66 #define FFB_SFB8B_VOFF 0x00800000 67 #define FFB_SFB8X_VOFF 0x00c00000 68 #define FFB_SFB32_VOFF 0x01000000 69 #define FFB_SFB64_VOFF 0x02000000 70 #define FFB_FBC_REGS_VOFF 0x04000000 71 #define FFB_BM_FBC_REGS_VOFF 0x04002000 72 #define FFB_DFB8R_VOFF 0x04004000 73 #define FFB_DFB8G_VOFF 0x04404000 [all …]
|
/linux-6.14.4/Documentation/devicetree/bindings/watchdog/ |
D | snps,dw-wdt.yaml | 71 default: [0x0001000 0x0002000 0x0004000 0x0008000 72 0x0010000 0x0020000 0x0040000 0x0080000 73 0x0100000 0x0200000 0x0400000 0x0800000 74 0x1000000 0x2000000 0x4000000 0x8000000] 89 reg = <0xffd02000 0x1000>; 90 interrupts = <0 171 4>; 98 reg = <0xffd02000 0x1000>; 99 interrupts = <0 171 4>; 102 snps,watchdog-tops = <0x000000FF 0x000001FF 0x000003FF 103 0x000007FF 0x0000FFFF 0x0001FFFF [all …]
|
/linux-6.14.4/drivers/net/wireless/mediatek/mt76/mt7925/ |
D | pci.c | 14 { PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x7925), 16 { PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x0717), 57 dev->backup_l1 = 0; in mt7925_reg_remap_restore() 62 dev->backup_l2 = 0; in mt7925_reg_remap_restore() 103 { 0x830c0000, 0x000000, 0x0001000 }, /* WF_MCU_BUS_CR_REMAP */ in __mt7925_reg_addr() 104 { 0x54000000, 0x002000, 0x0001000 }, /* WFDMA PCIE0 MCU DMA0 */ in __mt7925_reg_addr() 105 { 0x55000000, 0x003000, 0x0001000 }, /* WFDMA PCIE0 MCU DMA1 */ in __mt7925_reg_addr() 106 { 0x56000000, 0x004000, 0x0001000 }, /* WFDMA reserved */ in __mt7925_reg_addr() 107 { 0x57000000, 0x005000, 0x0001000 }, /* WFDMA MCU wrap CR */ in __mt7925_reg_addr() 108 { 0x58000000, 0x006000, 0x0001000 }, /* WFDMA PCIE1 MCU DMA0 (MEM_DMA) */ in __mt7925_reg_addr() [all …]
|
/linux-6.14.4/drivers/of/unittest-data/ |
D | tests-address.dtsi | 17 ranges = <0x70000000 0x70000000 0x50000000>, 18 <0x00000000 0xd0000000 0x20000000>; 19 dma-ranges = <0x0 0x20000000 0x40000000>; 22 reg = <0x70000000 0x1000>; 28 ranges = <0x0 0x0 0x80000000 0x0 0x100000>; 29 dma-ranges = <0x1 0x0 0x0 0x20 0x0>; 32 reg = <0x0 0x1000 0x0 0x1000>; 40 reg = <0x90000000 0x1000>; 41 ranges = <0x42000000 0x0 0x40000000 0x40000000 0x0 0x10000000>; 42 dma-ranges = <0x42000000 0x0 0x80000000 0x00000000 0x0 0x10000000>, [all …]
|
/linux-6.14.4/Documentation/devicetree/bindings/pci/ |
D | snps,dw-pcie.yaml | 55 CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region 62 by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of 72 can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can 83 normally mapped to the 0x0 address of this region, while eDMA 84 is available at 0x80000 base address. 149 pattern: '^dma([0-9]|1[0-5])?$' 222 reg = <0xdfc00000 0x0001000>, /* IP registers */ 223 <0xd0000000 0x0002000>; /* Configuration space */ 227 ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>, 228 <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>; [all …]
|
/linux-6.14.4/include/sound/ |
D | acp63_chip_offset_byte.h | 12 #define ACP_DMA_CNTL_0 0x0000000 13 #define ACP_DMA_CNTL_1 0x0000004 14 #define ACP_DMA_CNTL_2 0x0000008 15 #define ACP_DMA_CNTL_3 0x000000C 16 #define ACP_DMA_CNTL_4 0x0000010 17 #define ACP_DMA_CNTL_5 0x0000014 18 #define ACP_DMA_CNTL_6 0x0000018 19 #define ACP_DMA_CNTL_7 0x000001C 20 #define ACP_DMA_DSCR_STRT_IDX_0 0x0000020 21 #define ACP_DMA_DSCR_STRT_IDX_1 0x0000024 [all …]
|
/linux-6.14.4/drivers/media/pci/ivtv/ |
D | ivtvfb.c | 65 "Only use framebuffer of the specified ivtv card (0-31)\n" 77 Why start at 1 for left & upper coordinate ? Because X doesn't allow 0 */ 91 "\t\t\tdefault 0 (Centered)"); 95 "\t\t\tdefault 0 (Centered)"); 112 #define IVTVFB_DBGFLG_WARN (1 << 0) 119 } while (0) 133 #define IVTV_OSD_BPP_8 0x00 134 #define IVTV_OSD_BPP_16_444 0x03 135 #define IVTV_OSD_BPP_16_555 0x02 136 #define IVTV_OSD_BPP_16_565 0x01 [all …]
|
/linux-6.14.4/drivers/gpu/drm/i915/display/ |
D | g4x_dp.c | 50 { .dot = 162000, .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a /* 32.4 */ }, 51 { .dot = 270000, .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 /* 27.0 */ }, 56 return IS_CHERRYVIEW(i915) ? &chv_dpll[0] : &vlv_dpll[0]; in vlv_get_dpll() 64 int i, count = 0; in g4x_dp_set_clock() 81 for (i = 0; i < count; i++) { in g4x_dp_set_clock() 149 TRANS_DP_ENH_FRAMING : 0); in intel_dp_prepare() 347 u32 tmp, flags = 0; in intel_dp_get_config() 430 DP_PORT_EN) == 0)) in intel_dp_link_down() 704 unsigned int lane_mask = 0x0; in intel_enable_dp() 831 u8 train_set = intel_dp->train_set[0]; in vlv_set_signal_levels() [all …]
|
/linux-6.14.4/drivers/net/ethernet/intel/e1000/ |
D | e1000_hw.h | 21 e1000_undefined = 0, 40 e1000_eeprom_uninitialized = 0, 50 e1000_media_type_copper = 0, 57 e1000_10_half = 0, 65 E1000_FC_NONE = 0, 69 E1000_FC_DEFAULT = 0xFF 79 e1000_bus_type_unknown = 0, 87 e1000_bus_speed_unknown = 0, 98 e1000_bus_width_unknown = 0, 106 e1000_cable_length_50 = 0, [all …]
|
/linux-6.14.4/drivers/net/ethernet/nvidia/ |
D | forcedeth.c | 66 #define DEV_NEED_TIMERIRQ 0x0000001 /* set the timer irq flag in the irq mask */ 67 #define DEV_NEED_LINKTIMER 0x0000002 /* poll link settings. Relies on the timer irq */ 68 #define DEV_HAS_LARGEDESC 0x0000004 /* device supports jumbo frames and needs packet form… 69 #define DEV_HAS_HIGH_DMA 0x0000008 /* device supports 64bit dma */ 70 #define DEV_HAS_CHECKSUM 0x0000010 /* device supports tx and rx checksum offloads */ 71 #define DEV_HAS_VLAN 0x0000020 /* device supports vlan tagging and striping */ 72 #define DEV_HAS_MSI 0x0000040 /* device supports MSI */ 73 #define DEV_HAS_MSI_X 0x0000080 /* device supports MSI-X */ 74 #define DEV_HAS_POWER_CNTRL 0x0000100 /* device supports power savings */ 75 #define DEV_HAS_STATISTICS_V1 0x0000200 /* device supports hw statistics version 1 */ [all …]
|