1 /**
2 ******************************************************************************
3 * @file stm32l4xx_hal_rng_ex.c
4 * @author MCD Application Team
5 * @brief Extended RNG HAL module driver.
6 * This file provides firmware functions to manage the following
7 * functionalities of the Random Number Generator (RNG) peripheral:
8 * + Lock configuration functions
9 * + Reset the RNG
10 *
11 ******************************************************************************
12 * @attention
13 *
14 * <h2><center>© Copyright (c) 2017 STMicroelectronics.
15 * All rights reserved.</center></h2>
16 *
17 * This software component is licensed by ST under BSD 3-Clause license,
18 * the "License"; You may not use this file except in compliance with the
19 * License. You may obtain a copy of the License at:
20 * opensource.org/licenses/BSD-3-Clause
21 *
22 ******************************************************************************
23 */
24
25 /* Includes ------------------------------------------------------------------*/
26 #include "stm32l4xx_hal.h"
27
28 /** @addtogroup STM32L4xx_HAL_Driver
29 * @{
30 */
31
32 #if defined (RNG)
33
34 /** @addtogroup RNGEx
35 * @brief RNG Extended HAL module driver.
36 * @{
37 */
38
39 #ifdef HAL_RNG_MODULE_ENABLED
40 #if defined (RNG_CR_CONDRST)
41
42 /* Private types -------------------------------------------------------------*/
43 /* Private defines -----------------------------------------------------------*/
44
45 #if defined(RNG_VER_3_2) || defined(RNG_VER_3_1) || defined(RNG_VER_3_0)
46 /** @addtogroup RNGEx_Private_Defines
47 * @{
48 */
49 /* Health test control register information to use in CCM algorithm */
50 #define RNG_HTCFG 0x00005A4EU /*!< for best latency and To be compliant with NIST */
51 #define RNG_HTCFG_1 0x17590ABCU /*!< magic number */
52 /**
53 * @}
54 */
55 #endif
56
57 /* Private variables ---------------------------------------------------------*/
58 /* Private constants ---------------------------------------------------------*/
59 /** @defgroup RNGEx_Private_Constants RNG Private Constants
60 * @{
61 */
62 #define RNG_TIMEOUT_VALUE 2U
63 /**
64 * @}
65 */
66 /* Private macros ------------------------------------------------------------*/
67 /* Private functions prototypes ----------------------------------------------*/
68 /* Private functions ---------------------------------------------------------*/
69 /* Exported functions --------------------------------------------------------*/
70
71 /** @addtogroup RNGEx_Exported_Functions
72 * @{
73 */
74
75 /** @addtogroup RNGEx_Exported_Functions_Group1
76 * @brief Configuration functions
77 *
78 @verbatim
79 ===============================================================================
80 ##### Configuration and lock functions #####
81 ===============================================================================
82 [..] This section provides functions allowing to:
83 (+) Configure the RNG with the specified parameters in the RNG_ConfigTypeDef
84 (+) Lock RNG configuration Allows user to lock a configuration until next reset.
85
86 @endverbatim
87 * @{
88 */
89
90 /**
91 * @brief Configure the RNG with the specified parameters in the
92 * RNG_ConfigTypeDef.
93 * @param hrng pointer to a RNG_HandleTypeDef structure that contains
94 * the configuration information for RNG.
95 * @param pConf pointer to a RNG_ConfigTypeDef structure that contains
96 * the configuration information for RNG module
97
98 * @retval HAL status
99 */
HAL_RNGEx_SetConfig(RNG_HandleTypeDef * hrng,RNG_ConfigTypeDef * pConf)100 HAL_StatusTypeDef HAL_RNGEx_SetConfig(RNG_HandleTypeDef *hrng, RNG_ConfigTypeDef *pConf)
101 {
102 uint32_t tickstart;
103 uint32_t cr_value;
104 HAL_StatusTypeDef status ;
105
106 /* Check the RNG handle allocation */
107 if ((hrng == NULL)||(pConf == NULL))
108 {
109 return HAL_ERROR;
110 }
111
112 /* Check the parameters */
113 assert_param(IS_RNG_ALL_INSTANCE(hrng->Instance));
114 assert_param(IS_RNG_CLOCK_DIVIDER(pConf->ClockDivider));
115 assert_param(IS_RNG_NIST_COMPLIANCE(pConf->NistCompliance));
116 assert_param(IS_RNG_CONFIG1(pConf->Config1));
117 assert_param(IS_RNG_CONFIG2(pConf->Config2));
118 assert_param(IS_RNG_CONFIG3(pConf->Config3));
119
120 /* Check RNG peripheral state */
121 if (hrng->State == HAL_RNG_STATE_READY)
122 {
123 /* Change RNG peripheral state */
124 hrng->State = HAL_RNG_STATE_BUSY;
125
126 /* Disable RNG */
127 __HAL_RNG_DISABLE(hrng);
128
129 /* RNG CR register configuration. Set value in CR register for :
130 - NIST Compliance setting
131 - Clock divider value
132 - CONFIG 1, CONFIG 2 and CONFIG 3 values */
133
134 cr_value = (uint32_t) ( pConf->ClockDivider | pConf->NistCompliance
135 | (pConf->Config1 << RNG_CR_RNG_CONFIG1_Pos)
136 | (pConf->Config2 << RNG_CR_RNG_CONFIG2_Pos)
137 | (pConf->Config3 << RNG_CR_RNG_CONFIG3_Pos));
138
139 MODIFY_REG(hrng->Instance->CR, RNG_CR_NISTC | RNG_CR_CLKDIV | RNG_CR_RNG_CONFIG1
140 | RNG_CR_RNG_CONFIG2 | RNG_CR_RNG_CONFIG3,
141 (uint32_t) (RNG_CR_CONDRST | cr_value));
142
143 #if defined(RNG_VER_3_2) || defined(RNG_VER_3_1) || defined(RNG_VER_3_0)
144 /*!< magic number must be written immediately before to RNG_HTCRG */
145 WRITE_REG(hrng->Instance->HTCR, RNG_HTCFG_1);
146 /* for best latency and to be compliant with NIST */
147 WRITE_REG(hrng->Instance->HTCR, RNG_HTCFG);
148 #endif
149
150 /* Writing bits CONDRST=0*/
151 CLEAR_BIT(hrng->Instance->CR, RNG_CR_CONDRST);
152 /* Get tick */
153 tickstart = HAL_GetTick();
154
155 /* Wait for conditioning reset process to be completed */
156 while(HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST))
157 {
158 if((HAL_GetTick() - tickstart ) > RNG_TIMEOUT_VALUE)
159 {
160 hrng->State = HAL_RNG_STATE_READY;
161 hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT;
162 return HAL_ERROR;
163 }
164 }
165
166 /* Enable RNG */
167 __HAL_RNG_ENABLE(hrng);
168
169 /* Initialize the RNG state */
170 hrng->State = HAL_RNG_STATE_READY;
171
172 /* function status */
173 status = HAL_OK;
174 }
175 else
176 {
177 hrng->ErrorCode = HAL_RNG_ERROR_BUSY;
178 status = HAL_ERROR;
179 }
180
181 /* Return the function status */
182 return status;
183 }
184
185 /**
186 * @brief Get the RNG Configuration and fill parameters in the
187 * RNG_ConfigTypeDef.
188 * @param hrng pointer to a RNG_HandleTypeDef structure that contains
189 * the configuration information for RNG.
190 * @param pConf pointer to a RNG_ConfigTypeDef structure that contains
191 * the configuration information for RNG module
192
193 * @retval HAL status
194 */
HAL_RNGEx_GetConfig(RNG_HandleTypeDef * hrng,RNG_ConfigTypeDef * pConf)195 HAL_StatusTypeDef HAL_RNGEx_GetConfig(RNG_HandleTypeDef *hrng, RNG_ConfigTypeDef *pConf)
196 {
197
198 HAL_StatusTypeDef status ;
199
200 /* Check the RNG handle allocation */
201 if ((hrng == NULL)||(pConf == NULL))
202 {
203 return HAL_ERROR;
204 }
205
206 /* Check RNG peripheral state */
207 if (hrng->State == HAL_RNG_STATE_READY)
208 {
209 /* Change RNG peripheral state */
210 hrng->State = HAL_RNG_STATE_BUSY;
211
212 /* Get RNG parameters */
213 pConf->Config1 = (uint32_t) ((hrng->Instance->CR & RNG_CR_RNG_CONFIG1) >> RNG_CR_RNG_CONFIG1_Pos) ;
214 pConf->Config2 = (uint32_t) ((hrng->Instance->CR & RNG_CR_RNG_CONFIG2) >> RNG_CR_RNG_CONFIG2_Pos);
215 pConf->Config3 = (uint32_t)((hrng->Instance->CR & RNG_CR_RNG_CONFIG3) >> RNG_CR_RNG_CONFIG3_Pos);
216 pConf->ClockDivider = (hrng->Instance->CR & RNG_CR_CLKDIV);
217 pConf->NistCompliance = (hrng->Instance->CR & RNG_CR_NISTC);
218
219 /* Initialize the RNG state */
220 hrng->State = HAL_RNG_STATE_READY;
221
222 /* function status */
223 status = HAL_OK;
224 }
225 else
226 {
227 hrng->ErrorCode |= HAL_RNG_ERROR_BUSY;
228 status = HAL_ERROR;
229 }
230
231 /* Return the function status */
232 return status;
233 }
234
235 /**
236 * @brief RNG current configuration lock.
237 * @note This function allows to lock RNG peripheral configuration.
238 * Once locked, HW RNG reset has to be perfomed prior any further
239 * configuration update.
240 * @param hrng pointer to a RNG_HandleTypeDef structure that contains
241 * the configuration information for RNG.
242 * @retval HAL status
243 */
HAL_RNGEx_LockConfig(RNG_HandleTypeDef * hrng)244 HAL_StatusTypeDef HAL_RNGEx_LockConfig(RNG_HandleTypeDef *hrng)
245 {
246 HAL_StatusTypeDef status;
247
248 /* Check the RNG handle allocation */
249 if (hrng == NULL)
250 {
251 return HAL_ERROR;
252 }
253
254 /* Check RNG peripheral state */
255 if(hrng->State == HAL_RNG_STATE_READY)
256 {
257 /* Change RNG peripheral state */
258 hrng->State = HAL_RNG_STATE_BUSY;
259
260 /* Perform RNG configuration Lock */
261 MODIFY_REG(hrng->Instance->CR, RNG_CR_CONFIGLOCK, RNG_CR_CONFIGLOCK);
262
263 /* Change RNG peripheral state */
264 hrng->State = HAL_RNG_STATE_READY;
265
266 /* function status */
267 status = HAL_OK;
268 }
269 else
270 {
271 hrng->ErrorCode = HAL_RNG_ERROR_BUSY;
272 status = HAL_ERROR;
273 }
274
275 /* Return the function status */
276 return status;
277 }
278
279
280 /**
281 * @}
282 */
283
284 /**
285 * @}
286 */
287
288 #endif /* CONDRST */
289 #endif /* HAL_RNG_MODULE_ENABLED */
290 /**
291 * @}
292 */
293
294 #endif /* RNG */
295
296 /**
297 * @}
298 */
299
300 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
301