1 /** 2 ****************************************************************************** 3 * @file stm32l4xx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration template file. 6 * This file should be copied to the application folder and renamed 7 * to stm32l4xx_hal_conf.h. 8 ****************************************************************************** 9 * @attention 10 * 11 * <h2><center>© Copyright (c) 2017 STMicroelectronics. 12 * All rights reserved.</center></h2> 13 * 14 * This software component is licensed by ST under BSD 3-Clause license, 15 * the "License"; You may not use this file except in compliance with the 16 * License. You may obtain a copy of the License at: 17 * opensource.org/licenses/BSD-3-Clause 18 * 19 ****************************************************************************** 20 */ 21 22 /* Define to prevent recursive inclusion -------------------------------------*/ 23 #ifndef STM32L4xx_HAL_CONF_H 24 #define STM32L4xx_HAL_CONF_H 25 26 #ifdef __cplusplus 27 extern "C" { 28 #endif 29 30 /* Exported types ------------------------------------------------------------*/ 31 /* Exported constants --------------------------------------------------------*/ 32 33 /* ########################## Module Selection ############################## */ 34 /** 35 * @brief This is the list of modules to be used in the HAL driver 36 */ 37 #define HAL_MODULE_ENABLED 38 #define HAL_ADC_MODULE_ENABLED 39 #define HAL_CAN_MODULE_ENABLED 40 /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ 41 #define HAL_COMP_MODULE_ENABLED 42 #define HAL_CORTEX_MODULE_ENABLED 43 #define HAL_CRC_MODULE_ENABLED 44 #define HAL_CRYP_MODULE_ENABLED 45 #define HAL_DAC_MODULE_ENABLED 46 #define HAL_DCMI_MODULE_ENABLED 47 #define HAL_DFSDM_MODULE_ENABLED 48 #define HAL_DMA_MODULE_ENABLED 49 #define HAL_DMA2D_MODULE_ENABLED 50 #define HAL_DSI_MODULE_ENABLED 51 #define HAL_EXTI_MODULE_ENABLED 52 #define HAL_FIREWALL_MODULE_ENABLED 53 #define HAL_FLASH_MODULE_ENABLED 54 #define HAL_GFXMMU_MODULE_ENABLED 55 #define HAL_GPIO_MODULE_ENABLED 56 #define HAL_HASH_MODULE_ENABLED 57 #define HAL_HCD_MODULE_ENABLED 58 #define HAL_I2C_MODULE_ENABLED 59 #define HAL_IRDA_MODULE_ENABLED 60 #define HAL_IWDG_MODULE_ENABLED 61 #define HAL_LCD_MODULE_ENABLED 62 #define HAL_LPTIM_MODULE_ENABLED 63 #define HAL_LTDC_MODULE_ENABLED 64 #define HAL_MMC_MODULE_ENABLED 65 #define HAL_NAND_MODULE_ENABLED 66 #define HAL_NOR_MODULE_ENABLED 67 #define HAL_OPAMP_MODULE_ENABLED 68 #define HAL_OSPI_MODULE_ENABLED 69 #define HAL_PCD_MODULE_ENABLED 70 #define HAL_PKA_MODULE_ENABLED 71 #define HAL_PSSI_MODULE_ENABLED 72 #define HAL_PWR_MODULE_ENABLED 73 #define HAL_QSPI_MODULE_ENABLED 74 #define HAL_RCC_MODULE_ENABLED 75 #define HAL_RNG_MODULE_ENABLED 76 #define HAL_RTC_MODULE_ENABLED 77 #define HAL_SAI_MODULE_ENABLED 78 #define HAL_SD_MODULE_ENABLED 79 #define HAL_SMARTCARD_MODULE_ENABLED 80 #define HAL_SMBUS_MODULE_ENABLED 81 #define HAL_SPI_MODULE_ENABLED 82 #define HAL_SRAM_MODULE_ENABLED 83 #define HAL_SWPMI_MODULE_ENABLED 84 #define HAL_TIM_MODULE_ENABLED 85 #define HAL_TSC_MODULE_ENABLED 86 #define HAL_UART_MODULE_ENABLED 87 #define HAL_USART_MODULE_ENABLED 88 #define HAL_WWDG_MODULE_ENABLED 89 90 91 /* ########################## Oscillator Values adaptation ####################*/ 92 /** 93 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 94 * This value is used by the RCC HAL module to compute the system frequency 95 * (when HSE is used as system clock source, directly or through the PLL). 96 */ 97 #if !defined (HSE_VALUE) 98 #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ 99 #endif /* HSE_VALUE */ 100 101 #if !defined (HSE_STARTUP_TIMEOUT) 102 #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ 103 #endif /* HSE_STARTUP_TIMEOUT */ 104 105 /** 106 * @brief Internal Multiple Speed oscillator (MSI) default value. 107 * This value is the default MSI range value after Reset. 108 */ 109 #if !defined (MSI_VALUE) 110 #define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/ 111 #endif /* MSI_VALUE */ 112 113 /** 114 * @brief Internal High Speed oscillator (HSI) value. 115 * This value is used by the RCC HAL module to compute the system frequency 116 * (when HSI is used as system clock source, directly or through the PLL). 117 */ 118 #if !defined (HSI_VALUE) 119 #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ 120 #endif /* HSI_VALUE */ 121 122 /** 123 * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. 124 * This internal oscillator is mainly dedicated to provide a high precision clock to 125 * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. 126 * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency 127 * which is subject to manufacturing process variations. 128 */ 129 #if !defined (HSI48_VALUE) 130 #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. 131 The real value my vary depending on manufacturing process variations.*/ 132 #endif /* HSI48_VALUE */ 133 134 /** 135 * @brief Internal Low Speed oscillator (LSI) value. 136 */ 137 #if !defined (LSI_VALUE) 138 #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ 139 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 140 The real value may vary depending on the variations 141 in voltage and temperature.*/ 142 /** 143 * @brief External Low Speed oscillator (LSE) value. 144 * This value is used by the UART, RTC HAL module to compute the system frequency 145 */ 146 #if !defined (LSE_VALUE) 147 #define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ 148 #endif /* LSE_VALUE */ 149 150 #if !defined (LSE_STARTUP_TIMEOUT) 151 #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ 152 #endif /* HSE_STARTUP_TIMEOUT */ 153 154 /** 155 * @brief External clock source for SAI1 peripheral 156 * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 157 * frequency. 158 */ 159 #if !defined (EXTERNAL_SAI1_CLOCK_VALUE) 160 #define EXTERNAL_SAI1_CLOCK_VALUE 48000U /*!< Value of the SAI1 External clock source in Hz*/ 161 #endif /* EXTERNAL_SAI1_CLOCK_VALUE */ 162 163 /** 164 * @brief External clock source for SAI2 peripheral 165 * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 166 * frequency. 167 */ 168 #if !defined (EXTERNAL_SAI2_CLOCK_VALUE) 169 #define EXTERNAL_SAI2_CLOCK_VALUE 48000U /*!< Value of the SAI2 External clock source in Hz*/ 170 #endif /* EXTERNAL_SAI2_CLOCK_VALUE */ 171 172 /* Tip: To avoid modifying this file each time you need to use different HSE, 173 === you can define the HSE value in your toolchain compiler preprocessor. */ 174 175 /* ########################### System Configuration ######################### */ 176 /** 177 * @brief This is the HAL system configuration section 178 */ 179 #define VDD_VALUE 3300U /*!< Value of VDD in mv */ 180 #define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */ 181 #define USE_RTOS 0U 182 #define PREFETCH_ENABLE 0U 183 #define INSTRUCTION_CACHE_ENABLE 1U 184 #define DATA_CACHE_ENABLE 1U 185 186 /* ########################## Assert Selection ############################## */ 187 /** 188 * @brief Uncomment the line below to expanse the "assert_param" macro in the 189 * HAL drivers code 190 */ 191 /* #define USE_FULL_ASSERT 1U */ 192 193 /* ################## Register callback feature configuration ############### */ 194 /** 195 * @brief Set below the peripheral configuration to "1U" to add the support 196 * of HAL callback registration/deregistration feature for the HAL 197 * driver(s). This allows user application to provide specific callback 198 * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting 199 * the default weak callback functions (see each stm32l4xx_hal_ppp.h file 200 * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef 201 * for each PPP peripheral). 202 */ 203 #define USE_HAL_ADC_REGISTER_CALLBACKS 0U 204 #define USE_HAL_CAN_REGISTER_CALLBACKS 0U 205 #define USE_HAL_COMP_REGISTER_CALLBACKS 0U 206 #define USE_HAL_CRYP_REGISTER_CALLBACKS 0U 207 #define USE_HAL_DAC_REGISTER_CALLBACKS 0U 208 #define USE_HAL_DCMI_REGISTER_CALLBACKS 0U 209 #define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U 210 #define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U 211 #define USE_HAL_DSI_REGISTER_CALLBACKS 0U 212 #define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U 213 #define USE_HAL_HASH_REGISTER_CALLBACKS 0U 214 #define USE_HAL_HCD_REGISTER_CALLBACKS 0U 215 #define USE_HAL_I2C_REGISTER_CALLBACKS 0U 216 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U 217 #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U 218 #define USE_HAL_LTDC_REGISTER_CALLBACKS 0U 219 #define USE_HAL_MMC_REGISTER_CALLBACKS 0U 220 #define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U 221 #define USE_HAL_OSPI_REGISTER_CALLBACKS 0U 222 #define USE_HAL_PCD_REGISTER_CALLBACKS 0U 223 #define USE_HAL_QSPI_REGISTER_CALLBACKS 0U 224 #define USE_HAL_RNG_REGISTER_CALLBACKS 0U 225 #define USE_HAL_RTC_REGISTER_CALLBACKS 0U 226 #define USE_HAL_SAI_REGISTER_CALLBACKS 0U 227 #define USE_HAL_SD_REGISTER_CALLBACKS 0U 228 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U 229 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U 230 #define USE_HAL_SPI_REGISTER_CALLBACKS 0U 231 #define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U 232 #define USE_HAL_TIM_REGISTER_CALLBACKS 0U 233 #define USE_HAL_TSC_REGISTER_CALLBACKS 0U 234 #define USE_HAL_UART_REGISTER_CALLBACKS 0U 235 #define USE_HAL_USART_REGISTER_CALLBACKS 0U 236 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U 237 238 /* ################## SPI peripheral configuration ########################## */ 239 240 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 241 * Activated: CRC code is present inside driver 242 * Deactivated: CRC code cleaned from driver 243 */ 244 245 #define USE_SPI_CRC 1U 246 247 /* Includes ------------------------------------------------------------------*/ 248 /** 249 * @brief Include module's header file 250 */ 251 252 #ifdef HAL_RCC_MODULE_ENABLED 253 #include "stm32l4xx_hal_rcc.h" 254 #endif /* HAL_RCC_MODULE_ENABLED */ 255 256 #ifdef HAL_GPIO_MODULE_ENABLED 257 #include "stm32l4xx_hal_gpio.h" 258 #endif /* HAL_GPIO_MODULE_ENABLED */ 259 260 #ifdef HAL_DMA_MODULE_ENABLED 261 #include "stm32l4xx_hal_dma.h" 262 #endif /* HAL_DMA_MODULE_ENABLED */ 263 264 #ifdef HAL_DFSDM_MODULE_ENABLED 265 #include "stm32l4xx_hal_dfsdm.h" 266 #endif /* HAL_DFSDM_MODULE_ENABLED */ 267 268 #ifdef HAL_CORTEX_MODULE_ENABLED 269 #include "stm32l4xx_hal_cortex.h" 270 #endif /* HAL_CORTEX_MODULE_ENABLED */ 271 272 #ifdef HAL_ADC_MODULE_ENABLED 273 #include "stm32l4xx_hal_adc.h" 274 #endif /* HAL_ADC_MODULE_ENABLED */ 275 276 #ifdef HAL_CAN_MODULE_ENABLED 277 #include "stm32l4xx_hal_can.h" 278 #endif /* HAL_CAN_MODULE_ENABLED */ 279 280 #ifdef HAL_CAN_LEGACY_MODULE_ENABLED 281 #include "Legacy/stm32l4xx_hal_can_legacy.h" 282 #endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ 283 284 #ifdef HAL_COMP_MODULE_ENABLED 285 #include "stm32l4xx_hal_comp.h" 286 #endif /* HAL_COMP_MODULE_ENABLED */ 287 288 #ifdef HAL_CRC_MODULE_ENABLED 289 #include "stm32l4xx_hal_crc.h" 290 #endif /* HAL_CRC_MODULE_ENABLED */ 291 292 #ifdef HAL_CRYP_MODULE_ENABLED 293 #include "stm32l4xx_hal_cryp.h" 294 #endif /* HAL_CRYP_MODULE_ENABLED */ 295 296 #ifdef HAL_DAC_MODULE_ENABLED 297 #include "stm32l4xx_hal_dac.h" 298 #endif /* HAL_DAC_MODULE_ENABLED */ 299 300 #ifdef HAL_DCMI_MODULE_ENABLED 301 #include "stm32l4xx_hal_dcmi.h" 302 #endif /* HAL_DCMI_MODULE_ENABLED */ 303 304 #ifdef HAL_DMA2D_MODULE_ENABLED 305 #include "stm32l4xx_hal_dma2d.h" 306 #endif /* HAL_DMA2D_MODULE_ENABLED */ 307 308 #ifdef HAL_DSI_MODULE_ENABLED 309 #include "stm32l4xx_hal_dsi.h" 310 #endif /* HAL_DSI_MODULE_ENABLED */ 311 312 #ifdef HAL_EXTI_MODULE_ENABLED 313 #include "stm32l4xx_hal_exti.h" 314 #endif /* HAL_EXTI_MODULE_ENABLED */ 315 316 #ifdef HAL_GFXMMU_MODULE_ENABLED 317 #include "stm32l4xx_hal_gfxmmu.h" 318 #endif /* HAL_GFXMMU_MODULE_ENABLED */ 319 320 #ifdef HAL_FIREWALL_MODULE_ENABLED 321 #include "stm32l4xx_hal_firewall.h" 322 #endif /* HAL_FIREWALL_MODULE_ENABLED */ 323 324 #ifdef HAL_FLASH_MODULE_ENABLED 325 #include "stm32l4xx_hal_flash.h" 326 #endif /* HAL_FLASH_MODULE_ENABLED */ 327 328 #ifdef HAL_HASH_MODULE_ENABLED 329 #include "stm32l4xx_hal_hash.h" 330 #endif /* HAL_HASH_MODULE_ENABLED */ 331 332 #ifdef HAL_HCD_MODULE_ENABLED 333 #include "stm32l4xx_hal_hcd.h" 334 #endif /* HAL_HCD_MODULE_ENABLED */ 335 336 #ifdef HAL_I2C_MODULE_ENABLED 337 #include "stm32l4xx_hal_i2c.h" 338 #endif /* HAL_I2C_MODULE_ENABLED */ 339 340 #ifdef HAL_IRDA_MODULE_ENABLED 341 #include "stm32l4xx_hal_irda.h" 342 #endif /* HAL_IRDA_MODULE_ENABLED */ 343 344 #ifdef HAL_IWDG_MODULE_ENABLED 345 #include "stm32l4xx_hal_iwdg.h" 346 #endif /* HAL_IWDG_MODULE_ENABLED */ 347 348 #ifdef HAL_LCD_MODULE_ENABLED 349 #include "stm32l4xx_hal_lcd.h" 350 #endif /* HAL_LCD_MODULE_ENABLED */ 351 352 #ifdef HAL_LPTIM_MODULE_ENABLED 353 #include "stm32l4xx_hal_lptim.h" 354 #endif /* HAL_LPTIM_MODULE_ENABLED */ 355 356 #ifdef HAL_LTDC_MODULE_ENABLED 357 #include "stm32l4xx_hal_ltdc.h" 358 #endif /* HAL_LTDC_MODULE_ENABLED */ 359 360 #ifdef HAL_MMC_MODULE_ENABLED 361 #include "stm32l4xx_hal_mmc.h" 362 #endif /* HAL_MMC_MODULE_ENABLED */ 363 364 #ifdef HAL_NAND_MODULE_ENABLED 365 #include "stm32l4xx_hal_nand.h" 366 #endif /* HAL_NAND_MODULE_ENABLED */ 367 368 #ifdef HAL_NOR_MODULE_ENABLED 369 #include "stm32l4xx_hal_nor.h" 370 #endif /* HAL_NOR_MODULE_ENABLED */ 371 372 #ifdef HAL_OPAMP_MODULE_ENABLED 373 #include "stm32l4xx_hal_opamp.h" 374 #endif /* HAL_OPAMP_MODULE_ENABLED */ 375 376 #ifdef HAL_OSPI_MODULE_ENABLED 377 #include "stm32l4xx_hal_ospi.h" 378 #endif /* HAL_OSPI_MODULE_ENABLED */ 379 380 #ifdef HAL_PCD_MODULE_ENABLED 381 #include "stm32l4xx_hal_pcd.h" 382 #endif /* HAL_PCD_MODULE_ENABLED */ 383 384 #ifdef HAL_PKA_MODULE_ENABLED 385 #include "stm32l4xx_hal_pka.h" 386 #endif /* HAL_PKA_MODULE_ENABLED */ 387 388 #ifdef HAL_PSSI_MODULE_ENABLED 389 #include "stm32l4xx_hal_pssi.h" 390 #endif /* HAL_PSSI_MODULE_ENABLED */ 391 392 #ifdef HAL_PWR_MODULE_ENABLED 393 #include "stm32l4xx_hal_pwr.h" 394 #endif /* HAL_PWR_MODULE_ENABLED */ 395 396 #ifdef HAL_QSPI_MODULE_ENABLED 397 #include "stm32l4xx_hal_qspi.h" 398 #endif /* HAL_QSPI_MODULE_ENABLED */ 399 400 #ifdef HAL_RNG_MODULE_ENABLED 401 #include "stm32l4xx_hal_rng.h" 402 #endif /* HAL_RNG_MODULE_ENABLED */ 403 404 #ifdef HAL_RTC_MODULE_ENABLED 405 #include "stm32l4xx_hal_rtc.h" 406 #endif /* HAL_RTC_MODULE_ENABLED */ 407 408 #ifdef HAL_SAI_MODULE_ENABLED 409 #include "stm32l4xx_hal_sai.h" 410 #endif /* HAL_SAI_MODULE_ENABLED */ 411 412 #ifdef HAL_SD_MODULE_ENABLED 413 #include "stm32l4xx_hal_sd.h" 414 #endif /* HAL_SD_MODULE_ENABLED */ 415 416 #ifdef HAL_SMARTCARD_MODULE_ENABLED 417 #include "stm32l4xx_hal_smartcard.h" 418 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 419 420 #ifdef HAL_SMBUS_MODULE_ENABLED 421 #include "stm32l4xx_hal_smbus.h" 422 #endif /* HAL_SMBUS_MODULE_ENABLED */ 423 424 #ifdef HAL_SPI_MODULE_ENABLED 425 #include "stm32l4xx_hal_spi.h" 426 #endif /* HAL_SPI_MODULE_ENABLED */ 427 428 #ifdef HAL_SRAM_MODULE_ENABLED 429 #include "stm32l4xx_hal_sram.h" 430 #endif /* HAL_SRAM_MODULE_ENABLED */ 431 432 #ifdef HAL_SWPMI_MODULE_ENABLED 433 #include "stm32l4xx_hal_swpmi.h" 434 #endif /* HAL_SWPMI_MODULE_ENABLED */ 435 436 #ifdef HAL_TIM_MODULE_ENABLED 437 #include "stm32l4xx_hal_tim.h" 438 #endif /* HAL_TIM_MODULE_ENABLED */ 439 440 #ifdef HAL_TSC_MODULE_ENABLED 441 #include "stm32l4xx_hal_tsc.h" 442 #endif /* HAL_TSC_MODULE_ENABLED */ 443 444 #ifdef HAL_UART_MODULE_ENABLED 445 #include "stm32l4xx_hal_uart.h" 446 #endif /* HAL_UART_MODULE_ENABLED */ 447 448 #ifdef HAL_USART_MODULE_ENABLED 449 #include "stm32l4xx_hal_usart.h" 450 #endif /* HAL_USART_MODULE_ENABLED */ 451 452 #ifdef HAL_WWDG_MODULE_ENABLED 453 #include "stm32l4xx_hal_wwdg.h" 454 #endif /* HAL_WWDG_MODULE_ENABLED */ 455 456 /* Exported macro ------------------------------------------------------------*/ 457 #ifdef USE_FULL_ASSERT 458 /** 459 * @brief The assert_param macro is used for function's parameters check. 460 * @param expr If expr is false, it calls assert_failed function 461 * which reports the name of the source file and the source 462 * line number of the call that failed. 463 * If expr is true, it returns no value. 464 * @retval None 465 */ 466 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 467 /* Exported functions ------------------------------------------------------- */ 468 void assert_failed(uint8_t *file, uint32_t line); 469 #else 470 #define assert_param(expr) ((void)0U) 471 #endif /* USE_FULL_ASSERT */ 472 473 #ifdef __cplusplus 474 } 475 #endif 476 477 #endif /* STM32L4xx_HAL_CONF_H */ 478 479 480 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 481