ELF Y @ @ 8 6 M % % % % M M M % % % % % M % % % % % % % % % % % % % % % % % % % % % % % % % % % % M M % M M M M M M M M 0 "user_address = %#llX, size = %ld", REC->user_address, REC->size "user_address = %#llX, size = %ld, nents = %d", REC->user_address, REC->size, REC->nents "device_address = %#llX, size = %ld", REC->device_address, REC->size "device_address = %#llX, size = %ld", REC->device_address, REC->size "fd = %d", REC->fd "device_address = %#llX, size = %ld", REC->device_address, REC->size "device_address = %#llX, size = %ld", REC->device_address, REC->size "device_address = %#llX, size = %ld", REC->device_address, REC->size "vdid = %d", REC->vdid "vdid = %d", REC->vdid "vdid = %d", REC->vdid "vdid = %d", REC->vdid "requested_cores = %d", REC->requested_cores "vdid = %d", REC->vdid "vdid = %d", REC->vdid "vdid = %d", REC->vdid "seq = %llu", REC->seq "seq = %llu", REC->seq "irq = %d", REC->irq "seq = %llu", REC->seq $ gxp-fw-region Invalid Core %u firmware Image size (%d > %zu) Thermals limited to UD+ dma_addr_t Unable to get client list lock on suspend failure Zero frequency value not allowed. Frequency range not forwarded to device (Err: %d). This env doesn't support best-fit algorithm with IOVAD Buffer size overflow: size=%#zx Failed to alloc sgt for mapping (ret=%d) Incomplete mailbox CMD queue ops. Failed to create debugfs for resource accessor (ret=%ld) No available query address cooling &ustats->dvfs_freqs_lock %lld Failed to allocate virtual device for client (%d) enable telemetry buffer failed (ret=%d) pm_runtime_put_sync returned %d during blk down Debugfs wakelock not held. ssmt_inst_data GSA device not found Invalid GXP power state received: %u. strnlen error active fw_tracing Invalid config, device address is zero dma=[ %llx %u %llx w_alloc_override Failed to allocate an entry of core usage hash table, uid=%d, core_id=%u FW sent an invalid component utilization value, type=%d, value=%d Failed to acquire wakelock for getting common dump, ret:%d Failed to register iommu fault handler phdr: da %#llx memsz %#x filesz %#x perm %d %llx Firmware is already running! Failed to create client Unable to allocate mailbox (core=%u, ret=%ld) Current Aurora reset vector for core %u: %#x BLK_AUR hasn't been turned off Cannot get block power state when the block is off. Received thermal throttling requests %lu. NS map %pad with size %#zx failed Failed to map IDMA SSMT register base (%ld) failed to create char device: %d GXP_MAILBOX_RESPONSE Mailbox response failed: Invalid virtual core id (%u) Failed to send the fault injection KCI: %d Map image config failed: %d Failed to copy sg_table (ret=%d) %lu Failed to %s thermal control: %d %.*s%lld 3iif: Only fences with signaler type AP are allowed to signal (signaler_ip=%d) Core telemetry manager was not allocated setting telemetry buffers in scratchpad region failed (ret=%d). Unrecoverable IOMMU fault! Mailbox Command Sent: core=%d, resp.status=%d, resp.retval=%d DMABUF NS regions array %zx is full Failed to get CMU resources Unable to deactivate context on clamp mode GXP_MAP_BUFFER none %.*s%u Failed to find gcip-dma-window property ] Failed to parse DVFS table %llu Failed to generate coredump Debug dump functionality is disabled Failed to allocate VD Failed! &mgr->req_pm_qos_work_lock Invalid state %d size &vd->finished_dump_processing_waitq Image config mapping failed 3gxp char device registration failed: %d Unable to get tpu-device base address GCIP noncontiguous alloc size=%#zx failed unknown %pad %lu %s %s %pad 32-bit Can only lock %u of %u pages requested &pm->lock Failed to find a registered resource for %pap Size of GCIP telemetry buffer must be a power of 2 and greater than %zu. Enable FW sent an invalid thread_id, thread_id=%d 4iif: The fence signal error has been overwritten: %d -> %d log_eventfd &mgr->debug_dump_lock Memory is not allocated for debug dump Virtual device is not available for vmap Mappings for %pad user buffer not found. Virtual device is not available for vunmap Unable to acquire shared FW data reserved memory Invalid firmware prefix requested: %s Waiting for core %u to respond... Core %u is alive! &mapping->sync_lock &mapping->vlock Failed to initialize firmware loader (ret=%d) error %d adding cdev for dev %d:%d Mailbox command failed: Invalid virtual core id (%u) GXP_REGISTER_INVALIDATED_EVENTFD Failed to allocate iommu domain %d of %u Fault injection KCI not accepted by the firmware: %d #dma-size-cells KCI %s returned %d Unknown rate for: %lu Failed to find the freq from the default ones of the kernel driver, freq=%u FW sent more DVFS freqs than the kernel driver can handle 3iif: Duplicated fences in in-fences and out-fences, id=%d 4iif: The fence signal error is set after the fence is signaled ../private/google-modules/gxp/gs201/gcip-kernel-driver/drivers/gcip/gcip-pm.c Replacing existing core telemetry eventfd Core dump not available core %u Failed to load core firmware: %s Core firmware doesn't have a valid image config Core %u firmware image does not fit (%zu > %llu) pmu-aur-status Failed to get PMU register base, ret=%ld gcip_pm_get failed ret=%d Config regions mapping failed Failed to map CMU registers from resource (ret=%d) 3Unable to register IRQ num=%d; error=%d TPU will not be available for interop Cannot process mailbox command for core %d when firmware isn't running Failed to enqueue mailbox command (ret=%d) Requested memory power state %d is invalid Missing mandatory operations for image config parser Failed to handle reverse KCI code %u (%d) gcip failed to add memory to mem pool: %d state2power_table The kernel driver doesn't have default DVFS freqs 3iif: Unsufficient fence signal-table space in device tree ../private/google-modules/gxp/gs201/gxp-vd.h Cannot acquire VIRTUAL_DEVICE wakelock on a broken virtual device &mgr->lock Failed to allocate coherent buffer gxp-scratchpad-region Failed to increase the PM count or power up the block (ret=%d) &mgr->pm_lock Thermal limited to UUD Requesting power state higher than current thermal limit (%lu) Attempt to suspend a virtual device twice Resuming VD vdid=%d client_id=%d... Resume request on core %u failed (status: %u) ssmt_idma &gxp->secure_vd_lock GXP_SYNC_BUFFER requires the client allocate a VIRTUAL_DEVICE GXP_POWER_STATE_OFF is not a valid value when executing a mailbox command failed to add devfreq device: %ld @%lld.%09ld Failed to set firmware tracing level to %lu: %d %pap: %#0*llx Disable FW metrics are later version with unknown fields (expected=%zu, actual=%u, fw_metric_version=%u) %d include/linux/thread_info.h %s requires the client allocate a VIRTUAL_DEVICE Secure buffer is not mapped. Unable to send the report to SSCD daemon (ret=%d) gxp_fw_core firmware_run Bad phdr filesz %#x memsz %#x Invalid shared region size, at least %#x, got %#llx %s fd Mapping core telemetry buffer to core %d failed Failed to init soc data: %d Failed to initialize GXP DMA interface GXP_UNREGISTER_MAILBOX_EVENTFD requires the client allocate a VIRTUAL_DEVICE gxp_platform_suspend No frequency table provided by the driver. Failed to set thermal cooling state: %d &client->semaphore Invalid vma size requested (%lu != %lu). Failed to generate the coredump. Firmware image does not fit (%zu > %llu) Firmware handshake failed on core %u Failed to turn off BLK_AUR (ret=%d) Failed to turn on BLK_AUR (ret=%d) gxp_power_work_queue gxp_pm_revoke_memory_power_state_vote requested_cores &vd->mailbox_resp_queues[i].waitq cmumux1 Failed to initialize debug dump &gxp->debugfs_client_lock No gsa-device in device tree. Firmware authentication not available TPU device not found Requested power state is invalid Requested memory power state is invalid GXP_POWER_STATE_READY is deprecated, please set GXP_POWER_LOW_FREQ_CLKMUX with GXP_POWER_STATE_UUD state Must allocate a virtual device to acquire VIRTUAL_DEVICE wakelock GXP_POWER_STATE_OFF is not a valid value when acquiring a wakelock %s-%s %llu-%llu %s Invalid dma data direction (dir=%d) after_enqueue_cmd returned an error, but not handled: ret=%d gcip-dvfs-table disable FW sent V1 metrics with invalid size (expected=%d, actual=%u) FW sent an invalid counter type, type=%d &sync_file->wq efd was not released Failed to unregister SysMMU fault handler Unable to acquire firmware reserved memory Bad phdr: da %#llx mem %#x load_dsp_firmware Requesting dsp core %d firmware failed (ret=%d) Timed out when enabling Core%u PSM! Invalid memory state %d with zero count Failed to set CMU resources 3gxp error creating gxp class: %ld Failed to map registers reg GXP_UNMAP_TPU_MBX_QUEUE requires the client allocate a VIRTUAL_DEVICE failed to add min_freq notifier:%d. Registering %d kHz returned with error: %d. fault_injection Unexpected synchronous command pending on mailbox release enable gcip-dvfs-table-size Invalid thermal cooling state %lu %s thermal control iif-fence-signal-table-region No virtual core for physical core %u. Failed to run firmware on core %u Requesting firmware be reloaded: %s Failed to map user buffer to kernel before blk power down failed: %d &vd->fence_list_lock &gxp->device_prop.lock Failed to get memory resource Unable to get tpu-device mailbox offset dma-bufs must be unmapped via GXP_UNMAP_DMABUF Failed to store mapping for dma-buf (ret=%d) GXP_UNMAP_DMABUF requires the client allocate a VIRTUAL_DEVICE client creating sync fence has no VD Required callbacks are not provided by the driver. supported ? Failed to map sgt to domain (ret=%d) 4iif: Fence is destroying before signaled, likely a bug of the signaler, id=%d, signaler_ip=%d gxp Failed to allocate sgt for coherent buffer Attempt to release nonexistent mailbox device_address = %#llX, size = %ld irq = %d Failed to find instruction/data SSMT register base sscoredump Probing gxp driver with commit %s No more domains available from pool of size %u request Unable to Map: %d dma_addr: %pad phys_addr: %pap size: %#lx Incomplete KCI ops. Missing trigger_doorbell. FW sent an invalid component_id for the counter update, component_id=%d 3iif: Failed to acquire the block wakelock of IP=%d 3iif: Only fences with signaler type AP are allowed to submit a signaler (signaler_ip=%d) Cannot do %s on a broken virtual device Invalid vma size(%lu bytes) requested for telemetry Failed to find default IOMMU domain pasid = %08X Unsupported firmware image config version %d Thermals limited to UD Thermal limited to SUD Thermals limited to UUD+ unable to find NS mapping @ %pad Undefined QoS request: %u. gxp_platform Failed to initialize firmware data: %d Invalid core count (%u) Ignore pending fault injection. The domain doesn't have enough space to reserve a region, size=%zu Invalid usage stats metric, skip parsing it (type=%d) Invalid usage stats metric, use user defined callbacks (metric=%d) %s%d device_address Suspending VD vdid=%d client_id=%d... CMU registers are not mapped aurora_mbx_irq Failed to init power management (ret=%d) No dma-buf mapped for given IOVA &gdevfreq->min_max_range_lock Failed to find OPP. Requested maxfreq: %lu, err: %ld. Inserting fault:%s Failed to map dmabuf to IOMMU domain (ret=%d) KCI commands still pending. gcip_kci_before_handle_resp gcip_mailbox_fetch_responses 3iif: Failed to map the fence wait-table region gxp debug dump (vdid %d)(core %0x) No mapping found for user buffer at device address %#llX grpid = %08X Missing VD and core CFG in image config, firmware is not bootable Aurora core %u processor ID: 0x%x No GSA device available, skipping firmware authentication Forcing a transition to PS%u on core%u, status: %x &mgr->set_acpm_state_work_lock map VD config %pad -> offset %#zx failed cmu &gxp->client_list_lock Probe finished tpu-device Failed to map TPU mailbox buffer %d Failed to acquire BLOCK wakelock for client (ret=%d) Unable to acquire client lock (tgid=%d pid=%d) custom &fw_tracing->lock Failed to add the reserved region to the manager (ret=%d) &kci->cmd_queue_lock 3iif: Failed to get the fence wait-table region Failed to fetch pasid-num-bits, defaulting to %d PASIDs (%d) FW buf %d memremap failed Unable to load firmware files Unable to run firmware with debugfs while other clients are running Firmware is already running on core %u TOP access from core %u successful! Failed to power up block %d This platform only supports direct-mode. BUFFER Powering off BLK ... Cannot request memory power state when BLK is off user_address = %#llX, size = %ld requested_cores = %d Attempt to resume a virtual device which was not suspended No tpu-device in device tree GXP_UNMAP_BUFFER requires the client allocate a VIRTUAL_DEVICE %u%n rw %lld Failed to find thermal cooling node: %s Too many states Failed to find the freq among the ones sent from the FW, freq=%u log Segment out of bounds: da %#llx mem %#x. Skipping... DSP FW authentication disabled, skipping Unable to send mailbox command -- mailbox %d not ready after blk power up failed: %d nents map core config %pad -> offset %#zx failed Invalidate a VD, VDID=%d, client_id=%d Failed to initialize core telemetry (ret=%d) gsa-device GSA device found, Firmware authentication available The host address of the unmap request is different from the original one GXP_GET_INVALIDATED_REASON requires the client allocate a VIRTUAL_DEVICE Failed to create sync file unknown read-only &mailbox->wait_list_waitq Incomplete mailbox RESP queue ops. The input format:
<1|2|4|8|> [value in hex] slc r_alloc_override iif-fence-wait-table-region ../private/google-modules/gxp/gs201/gxp-dci.c Common Registers ns_image_config_section mapping for core %u at iova %pad does not exist Debugfs wakelock is already held. seq Debug dump processing timedout for vdid %d. %s requires the client hold a VIRTUAL_DEVICE wakelock No mappings exist for TPU mailboxes Unable to copy ioctl data from user-space Failed to copy back sequence number! Buffer size insufficient to hold git build info (size=%d) unsupported %u-byte access is invalid KCI %s failed - %d log queue is corrupted &tel->mmap_lock gcip_thermal_enable_set 3iif: Failed to map the fence signal-table region Invalid core telemetry buffer size, enforcing to default %u bytes Failed to allocate per core telemetry buffer of %u bytes addr = %llX Failed to acquire BLOCK wakelock Powered up! Failed to switch PSM%u to PS%u mailbox gxp_response_%d wakelock The client vote power state %d when BLK is off size_t Insufficient available cores. Available: %u. Requested: %u &gxp->pin_user_pages_lock scmversion missing GXP_TRIGGER_DEBUG_DUMP GXP_RESERVE_IOVA_REGION convert memory to pages failed powersave pending gcip-dma-window r Failed to pin user pages (ret=%ld) Power down request denied, retrying in %d ms Invalid vd state=%u for processing dumps. Failed to allocate memory for debug dump Failed to power up core %u Incomplete gxp_mailbox args. Failed to map user buffer (ret=%d) Failed to create mailbox manager: %d Failed to init DMA fence manager: %d GXP_READ_GLOBAL_COUNTER requires the client hold a BLOCK wakelock Failed to find the min frequency limit:%ld. w &kci->resp_doorbell_waitq Setting out of range SLC pid: %llu %lld FW sent an invalid max watermark type, type=%d 3iif: Failed to get the fence signal-table region 3iif: Duplicated fences in the fence array, id=%d include/linux/dma-fence.h Invalid per core requested telemetry buffer size(%lu bytes) %pad user buffer requested with invalid size(%#x). perm = %08X Failed to map fw data region Failed to parse ELF firmware on core %u Aurora version: 0x%x %s Finished forced transition on core %u. target: PS%u, actual: PS%u, status: %x Core %d powered down pmu_aur_status user_address = %#llX, size = %ld, nents = %d Core %u stuck at LPM_ACTIVE_STATE unbalanced VD credit GXP_MAILBOX_COMMAND Mailbox not initialized for core %d &pool->lock stage 2 bootloader Incomplete KCI CMD queue ops. Incomplete KCI RESP queue ops. Mailbox cmd %u response status %u gcip memory pool allocate gen_pool failed Exceeded the number limit of default DVFS freqs &mgr->ops_sema 4iif: IP driver hasn't registered fence_unblocked, ip=%d error on adding a segment: %d, seg_idx: %d Attach IOMMU domain failed: %d reason = %08X gxp-secure-data-region Firmware is not running! Requesting dsp core %d firmware file: %s Mailbox %u released Powering on BLK ... Cannot set block power state when the block is off. Obtain a wakelock to power it on. Incorrect state %llu vdid = %d &gxp->vd_semaphore mailbox%d: received unknown interrupt bit 0x%X Failed to find the max frequency limit:%ld. err=%d injected Failed to get sgt from attachment (ret=%d, name=%s, size=%lu) gcip-reserved-map is not supported in mem_pool mode. GCIP mailbox failed on fetching responses: %ld pid Debug dump is not initialized Failed to map dma-buf (ret=%d) Thermal limit disallows all valid DVFS states pm_runtime_resume_and_get returned %d during blk up error setting gxp cooling state: %d debug dump processing failed (ret=%d). invalid system cfg size: %#llx Invalid QoS request: %u. Failed to find SSMT Failed to init thermal driver: %d Create debugfs dir failed: %d Cannot suspend with client holding wakelock (tgid=%d pid=%d) failed to add max_freq notifier:%d. Domain not found in pool FW sent an invalid component utilization type, type=%d Completed response had invalid status %hu Core 0 Firmware doesn't have a valid image config Core %u did not respond! u16 Suspension request on core %u failed (status: %u) map sys config %pad -> offset %#zx failed Incorrect state for mux state: %u 3Unable to parse interrupt for core %d from the DT gxp_soc_pm_init 3Unable to register SSCD platform device Failed to map mailbox%d's register gxp-tpu-mbx-offset Mapped buffers must be cache line aligned and padded. Mapping/linking TPU mailbox information already exists Failed to allocate ext TPU mailboxes %d GXP_POWER_NON_AGGRESSOR is deprecated, no operation here GXP_UNREGISTER_INVALIDATED_EVENTFD requires the client allocate a VIRTUAL_DEVICE Failed to get FD: %d %u gcip-reserved-map Delayed power down cancelled user_vote 3iif: Unsufficient fence wait-table space in device tree coredump Kernel mapping for %pad user buffer failed with error %ld. Failed to acquire VD wakelock Timed out when enabling Top PSM! gxp-cooling vdid Failed to initialize firmware manager (ret=%d) Failed to find OPP. Requested minfreq: %lu, err: %ld. No valid frequency within [%lu, %lu] frequency range. strscpy prod Failed to roll back the last image config %siova alloc size %zu failed Unknown KCI firmware error code: %d. Force shutdown with power up count: %d Invalid state: %lu 3iif: There is no outstanding signalers, id=%u 4iif: Fence is retiring when outstanding waiters > 0, it's likely a bug of the waiter IP driver, id=%d, waiter_ips=[%s] iif_file Virtual device was already allocated for client Failed to set DMA mask Cannot update firmware when any core is running Core %d on fail Thermals limited to SUD+ &vd->debug_dump_lock &vd->mappings_semaphore Failed to find IDMA SSMT register base Failed to map instruction/data SSMT register base (%ld) Failed to initialize IOMMU domain pool (ret=%d) Failed to store mapping (ret=%d) invalid address range in buffer map request , %pad Invalid response queue tail: %#x &thermal->lock %u %u FW sent an invalid core_id for the core usage update, core_id=%u 3iif: The fence is already signaled, id=%u GSA authentication failed: %d Waiting for core %u to power up... MAP UNMAP Core %d powered up blk_powerstate Cannot request power state when BLK is off Failed to power on BLK_AUR (ret=%d) u64 user_address fd = %d irq cmumux2 GXP_MAP_TPU_MBX_QUEUE signaled test Failed to attach dma-buf (ret=%ld, name=%s) Pin user pages failed: user_add=%#llx, num_pages=%u, %s, ret=%d memcpy Failed to initialize external thermal cooling %u LPM Registers fetch_addr = %llX Truncated fw: need %#x avail %#zx TOP access from core %u failed! New Aurora reset vector for core %u: %pad unable to power on core without TOP powered Failed to find a VD, client_id=%d Failed to acquire VIRTUAL_DEVICE wakelock for client (ret=%d) Failed to create debug FS tracing Unmapping IOVA %pad, size (%#zx) only unmapped %#zx Incomplete mailbox wait_list ops. Failed to map %pap %.*s%d flags = %08X IOMMU page request fault! Unable to acquire firmware secure data reserved memory Firmware is not an ELF, treated as raw binary. Failed to allocate coherent memory for header Incomplete gxp_mailbox ops. gxp_mailbox_chip_irq_handler Trigger debug dump failed: Invalid virtual core id (%u) failed to force TOP LPM to PS0 during blk down alloc SG table with size=%#zx failed: %d The IOMMU reserve manager is already retired ®ion->lock writeable resource-accessor Failed to create debugfs for thermal cooling Must hold BLOCK wakelock to acquire VIRTUAL_DEVICE wakelock Firmware is not running on core %u Mailbox for core %d doesn't exist. response task %d not set to RT prio iova_log: %s, %s, %d, %d, %#llx, %pad, %zu Thermal limit on DVFS removed int seq = %llu Core CFG (%#llx) + VD CFG (%#llx) exceeds %#x #dma-address-cells Power down request failed (%d) &ustats->usage_stats_lock FW sent an invalid component_id for the max watermark update, component_id=%d memremap failed for secure buffer. &mgr->waitq &mailbox->cmd_queue_lock Core dump should have been available debug dump failed for null vd on core %d. Unexpected IOMMU fault type (%d) pasid-num-bits (&mailbox->response_worker)->lock iova_log_start: operation, buf_type, tgid, pid, host_address, device_address, size Duplicate mapping: %pad Failed to get mailbox%d resource Failed to create mapping (ret=%d) Mapping not found for provided device address %#llX TPU is not available for interop GXP_MAP_DMABUF GXP_REGISTER_MAILBOX_EVENTFD GXP_RETIRE_IOVA_REGION suspended DMA fence init failed on after_init: %d &injection->lock error IOVA size always restricted to 32-bit cache 0x%llx %s is already mmapped %ld times %d core_telemetry_buffer_size debug_dump_enable gcip_iommu_domain_type dsp_fw_auth_disable mbx_timeout log_iova slow_clk P P P P P P P q q gxp @ h " x @ f0 \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ $ google,gxp !,%,,,) t *@Si "/