Lines Matching full:should

106  * to keep a partial wake-lock should they wish to receive sensor
244  *    The norm of <x, y, z>  should be close to 0 when in free fall.
299  *  direction (mathematically speaking, it should be positive in the
332  *  The range should at least be 17.45 rad/s (ie: ~1000 deg/s).
366  * the sensor should report its maxRange value in the "far" state and a value
380  * gravity sensor should be identical to that of the accelerometer.
395  * Readings on all axes should be close to 0 when device lies on a table.
476  *  Factory calibration and temperature compensation should still be applied to
483  *  is due to the Earth's poles should be avoided.
489  *    These values should be continuous (no re-calibration should cause a jump).
495  *    changes, and they should be stable the rest of the time.
501  *  Minimum filtering should be applied to this sensor. In particular, low pass
502  *  filters should be avoided.
519  *    sensors_event_t.data[4] is reserved and should be set to 0
522  *  orientation should report the same game rotation vector
542  *  Factory calibration and temperature compensation should still be applied
553  *  The range should at least be 17.45 rad/s (ie: ~1000 deg/s).
588  * Examples of situations that should not trigger significant motion:
596  *    in terms of power, so it should be avoided.
642  * done in hardware, this sensor should not be defined. Also, when the
643  * step detector is activated and the accelerometer is not, only steps should
693  * done in hardware, this sensor should not be defined. Also, when the
694  * step counter is activated and the accelerometer is not, only steps should