Lines Matching full:ppi
42 * NOTE: This code uses a couple of PPI channels so care should be taken when
43 * using PPI somewhere else.
568 /* Enable PPI */ in ble_phy_set_start_time()
603 /* Enable PPI */ in ble_phy_set_start_now()
621 * Function is used to set PPI so that we can time out waiting for a reception
692 /* Enable wait for response PPI */ in ble_phy_wfr_enable()
1013 * same as the limit when we need to have TX scheduled (i.e. TIMER0 and PPI in ble_phy_rx_end_isr()
1304 /* CH[20] and PPI CH[21] are on to trigger TASKS_TXEN or TASKS_RXEN */ in ble_phy_dbg_time_setup()
1430 * PPI setup. in ble_phy_init()
1503 /* PPI to start radio automatically shall be set here */ in ble_phy_rx()
1594 /* Enable PPI to automatically start TXEN */ in ble_phy_tx_set_start_time()
1635 /* Enable PPI to automatically start RXEN */ in ble_phy_rx_set_start_time()
1676 * XXX: Although we may not have to do this here, I clear all the PPI in ble_phy_tx()
1902 * ble phy disable irq and ppi
1928 /* Enable PPI to automatically start RXEN */ in ble_phy_restart_rx()
1939 * PPI and sets state to idle.