Lines Matching full:pin

161 …01UL) /*!< ADC is enabled. If an analog input pin is selected as source of the conversion, the sel…
166 /* Bits 17..16 : ADC external reference pin selection. */
173 /* Bits 15..8 : ADC analog pin selection. */
576 /* Bit 31 : Pin 31. */
579 #define GPIO_OUT_PIN31_Low (0UL) /*!< Pin driver is low. */
580 #define GPIO_OUT_PIN31_High (1UL) /*!< Pin driver is high. */
582 /* Bit 30 : Pin 30. */
585 #define GPIO_OUT_PIN30_Low (0UL) /*!< Pin driver is low. */
586 #define GPIO_OUT_PIN30_High (1UL) /*!< Pin driver is high. */
588 /* Bit 29 : Pin 29. */
591 #define GPIO_OUT_PIN29_Low (0UL) /*!< Pin driver is low. */
592 #define GPIO_OUT_PIN29_High (1UL) /*!< Pin driver is high. */
594 /* Bit 28 : Pin 28. */
597 #define GPIO_OUT_PIN28_Low (0UL) /*!< Pin driver is low. */
598 #define GPIO_OUT_PIN28_High (1UL) /*!< Pin driver is high. */
600 /* Bit 27 : Pin 27. */
603 #define GPIO_OUT_PIN27_Low (0UL) /*!< Pin driver is low. */
604 #define GPIO_OUT_PIN27_High (1UL) /*!< Pin driver is high. */
606 /* Bit 26 : Pin 26. */
609 #define GPIO_OUT_PIN26_Low (0UL) /*!< Pin driver is low. */
610 #define GPIO_OUT_PIN26_High (1UL) /*!< Pin driver is high. */
612 /* Bit 25 : Pin 25. */
615 #define GPIO_OUT_PIN25_Low (0UL) /*!< Pin driver is low. */
616 #define GPIO_OUT_PIN25_High (1UL) /*!< Pin driver is high. */
618 /* Bit 24 : Pin 24. */
621 #define GPIO_OUT_PIN24_Low (0UL) /*!< Pin driver is low. */
622 #define GPIO_OUT_PIN24_High (1UL) /*!< Pin driver is high. */
624 /* Bit 23 : Pin 23. */
627 #define GPIO_OUT_PIN23_Low (0UL) /*!< Pin driver is low. */
628 #define GPIO_OUT_PIN23_High (1UL) /*!< Pin driver is high. */
630 /* Bit 22 : Pin 22. */
633 #define GPIO_OUT_PIN22_Low (0UL) /*!< Pin driver is low. */
634 #define GPIO_OUT_PIN22_High (1UL) /*!< Pin driver is high. */
636 /* Bit 21 : Pin 21. */
639 #define GPIO_OUT_PIN21_Low (0UL) /*!< Pin driver is low. */
640 #define GPIO_OUT_PIN21_High (1UL) /*!< Pin driver is high. */
642 /* Bit 20 : Pin 20. */
645 #define GPIO_OUT_PIN20_Low (0UL) /*!< Pin driver is low. */
646 #define GPIO_OUT_PIN20_High (1UL) /*!< Pin driver is high. */
648 /* Bit 19 : Pin 19. */
651 #define GPIO_OUT_PIN19_Low (0UL) /*!< Pin driver is low. */
652 #define GPIO_OUT_PIN19_High (1UL) /*!< Pin driver is high. */
654 /* Bit 18 : Pin 18. */
657 #define GPIO_OUT_PIN18_Low (0UL) /*!< Pin driver is low. */
658 #define GPIO_OUT_PIN18_High (1UL) /*!< Pin driver is high. */
660 /* Bit 17 : Pin 17. */
663 #define GPIO_OUT_PIN17_Low (0UL) /*!< Pin driver is low. */
664 #define GPIO_OUT_PIN17_High (1UL) /*!< Pin driver is high. */
666 /* Bit 16 : Pin 16. */
669 #define GPIO_OUT_PIN16_Low (0UL) /*!< Pin driver is low. */
670 #define GPIO_OUT_PIN16_High (1UL) /*!< Pin driver is high. */
672 /* Bit 15 : Pin 15. */
675 #define GPIO_OUT_PIN15_Low (0UL) /*!< Pin driver is low. */
676 #define GPIO_OUT_PIN15_High (1UL) /*!< Pin driver is high. */
678 /* Bit 14 : Pin 14. */
681 #define GPIO_OUT_PIN14_Low (0UL) /*!< Pin driver is low. */
682 #define GPIO_OUT_PIN14_High (1UL) /*!< Pin driver is high. */
684 /* Bit 13 : Pin 13. */
687 #define GPIO_OUT_PIN13_Low (0UL) /*!< Pin driver is low. */
688 #define GPIO_OUT_PIN13_High (1UL) /*!< Pin driver is high. */
690 /* Bit 12 : Pin 12. */
693 #define GPIO_OUT_PIN12_Low (0UL) /*!< Pin driver is low. */
694 #define GPIO_OUT_PIN12_High (1UL) /*!< Pin driver is high. */
696 /* Bit 11 : Pin 11. */
699 #define GPIO_OUT_PIN11_Low (0UL) /*!< Pin driver is low. */
700 #define GPIO_OUT_PIN11_High (1UL) /*!< Pin driver is high. */
702 /* Bit 10 : Pin 10. */
705 #define GPIO_OUT_PIN10_Low (0UL) /*!< Pin driver is low. */
706 #define GPIO_OUT_PIN10_High (1UL) /*!< Pin driver is high. */
708 /* Bit 9 : Pin 9. */
711 #define GPIO_OUT_PIN9_Low (0UL) /*!< Pin driver is low. */
712 #define GPIO_OUT_PIN9_High (1UL) /*!< Pin driver is high. */
714 /* Bit 8 : Pin 8. */
717 #define GPIO_OUT_PIN8_Low (0UL) /*!< Pin driver is low. */
718 #define GPIO_OUT_PIN8_High (1UL) /*!< Pin driver is high. */
720 /* Bit 7 : Pin 7. */
723 #define GPIO_OUT_PIN7_Low (0UL) /*!< Pin driver is low. */
724 #define GPIO_OUT_PIN7_High (1UL) /*!< Pin driver is high. */
726 /* Bit 6 : Pin 6. */
729 #define GPIO_OUT_PIN6_Low (0UL) /*!< Pin driver is low. */
730 #define GPIO_OUT_PIN6_High (1UL) /*!< Pin driver is high. */
732 /* Bit 5 : Pin 5. */
735 #define GPIO_OUT_PIN5_Low (0UL) /*!< Pin driver is low. */
736 #define GPIO_OUT_PIN5_High (1UL) /*!< Pin driver is high. */
738 /* Bit 4 : Pin 4. */
741 #define GPIO_OUT_PIN4_Low (0UL) /*!< Pin driver is low. */
742 #define GPIO_OUT_PIN4_High (1UL) /*!< Pin driver is high. */
744 /* Bit 3 : Pin 3. */
747 #define GPIO_OUT_PIN3_Low (0UL) /*!< Pin driver is low. */
748 #define GPIO_OUT_PIN3_High (1UL) /*!< Pin driver is high. */
750 /* Bit 2 : Pin 2. */
753 #define GPIO_OUT_PIN2_Low (0UL) /*!< Pin driver is low. */
754 #define GPIO_OUT_PIN2_High (1UL) /*!< Pin driver is high. */
756 /* Bit 1 : Pin 1. */
759 #define GPIO_OUT_PIN1_Low (0UL) /*!< Pin driver is low. */
760 #define GPIO_OUT_PIN1_High (1UL) /*!< Pin driver is high. */
762 /* Bit 0 : Pin 0. */
765 #define GPIO_OUT_PIN0_Low (0UL) /*!< Pin driver is low. */
766 #define GPIO_OUT_PIN0_High (1UL) /*!< Pin driver is high. */
771 /* Bit 31 : Pin 31. */
774 #define GPIO_OUTSET_PIN31_Low (0UL) /*!< Pin driver is low. */
775 #define GPIO_OUTSET_PIN31_High (1UL) /*!< Pin driver is high. */
776 #define GPIO_OUTSET_PIN31_Set (1UL) /*!< Set pin driver high. */
778 /* Bit 30 : Pin 30. */
781 #define GPIO_OUTSET_PIN30_Low (0UL) /*!< Pin driver is low. */
782 #define GPIO_OUTSET_PIN30_High (1UL) /*!< Pin driver is high. */
783 #define GPIO_OUTSET_PIN30_Set (1UL) /*!< Set pin driver high. */
785 /* Bit 29 : Pin 29. */
788 #define GPIO_OUTSET_PIN29_Low (0UL) /*!< Pin driver is low. */
789 #define GPIO_OUTSET_PIN29_High (1UL) /*!< Pin driver is high. */
790 #define GPIO_OUTSET_PIN29_Set (1UL) /*!< Set pin driver high. */
792 /* Bit 28 : Pin 28. */
795 #define GPIO_OUTSET_PIN28_Low (0UL) /*!< Pin driver is low. */
796 #define GPIO_OUTSET_PIN28_High (1UL) /*!< Pin driver is high. */
797 #define GPIO_OUTSET_PIN28_Set (1UL) /*!< Set pin driver high. */
799 /* Bit 27 : Pin 27. */
802 #define GPIO_OUTSET_PIN27_Low (0UL) /*!< Pin driver is low. */
803 #define GPIO_OUTSET_PIN27_High (1UL) /*!< Pin driver is high. */
804 #define GPIO_OUTSET_PIN27_Set (1UL) /*!< Set pin driver high. */
806 /* Bit 26 : Pin 26. */
809 #define GPIO_OUTSET_PIN26_Low (0UL) /*!< Pin driver is low. */
810 #define GPIO_OUTSET_PIN26_High (1UL) /*!< Pin driver is high. */
811 #define GPIO_OUTSET_PIN26_Set (1UL) /*!< Set pin driver high. */
813 /* Bit 25 : Pin 25. */
816 #define GPIO_OUTSET_PIN25_Low (0UL) /*!< Pin driver is low. */
817 #define GPIO_OUTSET_PIN25_High (1UL) /*!< Pin driver is high. */
818 #define GPIO_OUTSET_PIN25_Set (1UL) /*!< Set pin driver high. */
820 /* Bit 24 : Pin 24. */
823 #define GPIO_OUTSET_PIN24_Low (0UL) /*!< Pin driver is low. */
824 #define GPIO_OUTSET_PIN24_High (1UL) /*!< Pin driver is high. */
825 #define GPIO_OUTSET_PIN24_Set (1UL) /*!< Set pin driver high. */
827 /* Bit 23 : Pin 23. */
830 #define GPIO_OUTSET_PIN23_Low (0UL) /*!< Pin driver is low. */
831 #define GPIO_OUTSET_PIN23_High (1UL) /*!< Pin driver is high. */
832 #define GPIO_OUTSET_PIN23_Set (1UL) /*!< Set pin driver high. */
834 /* Bit 22 : Pin 22. */
837 #define GPIO_OUTSET_PIN22_Low (0UL) /*!< Pin driver is low. */
838 #define GPIO_OUTSET_PIN22_High (1UL) /*!< Pin driver is high. */
839 #define GPIO_OUTSET_PIN22_Set (1UL) /*!< Set pin driver high. */
841 /* Bit 21 : Pin 21. */
844 #define GPIO_OUTSET_PIN21_Low (0UL) /*!< Pin driver is low. */
845 #define GPIO_OUTSET_PIN21_High (1UL) /*!< Pin driver is high. */
846 #define GPIO_OUTSET_PIN21_Set (1UL) /*!< Set pin driver high. */
848 /* Bit 20 : Pin 20. */
851 #define GPIO_OUTSET_PIN20_Low (0UL) /*!< Pin driver is low. */
852 #define GPIO_OUTSET_PIN20_High (1UL) /*!< Pin driver is high. */
853 #define GPIO_OUTSET_PIN20_Set (1UL) /*!< Set pin driver high. */
855 /* Bit 19 : Pin 19. */
858 #define GPIO_OUTSET_PIN19_Low (0UL) /*!< Pin driver is low. */
859 #define GPIO_OUTSET_PIN19_High (1UL) /*!< Pin driver is high. */
860 #define GPIO_OUTSET_PIN19_Set (1UL) /*!< Set pin driver high. */
862 /* Bit 18 : Pin 18. */
865 #define GPIO_OUTSET_PIN18_Low (0UL) /*!< Pin driver is low. */
866 #define GPIO_OUTSET_PIN18_High (1UL) /*!< Pin driver is high. */
867 #define GPIO_OUTSET_PIN18_Set (1UL) /*!< Set pin driver high. */
869 /* Bit 17 : Pin 17. */
872 #define GPIO_OUTSET_PIN17_Low (0UL) /*!< Pin driver is low. */
873 #define GPIO_OUTSET_PIN17_High (1UL) /*!< Pin driver is high. */
874 #define GPIO_OUTSET_PIN17_Set (1UL) /*!< Set pin driver high. */
876 /* Bit 16 : Pin 16. */
879 #define GPIO_OUTSET_PIN16_Low (0UL) /*!< Pin driver is low. */
880 #define GPIO_OUTSET_PIN16_High (1UL) /*!< Pin driver is high. */
881 #define GPIO_OUTSET_PIN16_Set (1UL) /*!< Set pin driver high. */
883 /* Bit 15 : Pin 15. */
886 #define GPIO_OUTSET_PIN15_Low (0UL) /*!< Pin driver is low. */
887 #define GPIO_OUTSET_PIN15_High (1UL) /*!< Pin driver is high. */
888 #define GPIO_OUTSET_PIN15_Set (1UL) /*!< Set pin driver high. */
890 /* Bit 14 : Pin 14. */
893 #define GPIO_OUTSET_PIN14_Low (0UL) /*!< Pin driver is low. */
894 #define GPIO_OUTSET_PIN14_High (1UL) /*!< Pin driver is high. */
895 #define GPIO_OUTSET_PIN14_Set (1UL) /*!< Set pin driver high. */
897 /* Bit 13 : Pin 13. */
900 #define GPIO_OUTSET_PIN13_Low (0UL) /*!< Pin driver is low. */
901 #define GPIO_OUTSET_PIN13_High (1UL) /*!< Pin driver is high. */
902 #define GPIO_OUTSET_PIN13_Set (1UL) /*!< Set pin driver high. */
904 /* Bit 12 : Pin 12. */
907 #define GPIO_OUTSET_PIN12_Low (0UL) /*!< Pin driver is low. */
908 #define GPIO_OUTSET_PIN12_High (1UL) /*!< Pin driver is high. */
909 #define GPIO_OUTSET_PIN12_Set (1UL) /*!< Set pin driver high. */
911 /* Bit 11 : Pin 11. */
914 #define GPIO_OUTSET_PIN11_Low (0UL) /*!< Pin driver is low. */
915 #define GPIO_OUTSET_PIN11_High (1UL) /*!< Pin driver is high. */
916 #define GPIO_OUTSET_PIN11_Set (1UL) /*!< Set pin driver high. */
918 /* Bit 10 : Pin 10. */
921 #define GPIO_OUTSET_PIN10_Low (0UL) /*!< Pin driver is low. */
922 #define GPIO_OUTSET_PIN10_High (1UL) /*!< Pin driver is high. */
923 #define GPIO_OUTSET_PIN10_Set (1UL) /*!< Set pin driver high. */
925 /* Bit 9 : Pin 9. */
928 #define GPIO_OUTSET_PIN9_Low (0UL) /*!< Pin driver is low. */
929 #define GPIO_OUTSET_PIN9_High (1UL) /*!< Pin driver is high. */
930 #define GPIO_OUTSET_PIN9_Set (1UL) /*!< Set pin driver high. */
932 /* Bit 8 : Pin 8. */
935 #define GPIO_OUTSET_PIN8_Low (0UL) /*!< Pin driver is low. */
936 #define GPIO_OUTSET_PIN8_High (1UL) /*!< Pin driver is high. */
937 #define GPIO_OUTSET_PIN8_Set (1UL) /*!< Set pin driver high. */
939 /* Bit 7 : Pin 7. */
942 #define GPIO_OUTSET_PIN7_Low (0UL) /*!< Pin driver is low. */
943 #define GPIO_OUTSET_PIN7_High (1UL) /*!< Pin driver is high. */
944 #define GPIO_OUTSET_PIN7_Set (1UL) /*!< Set pin driver high. */
946 /* Bit 6 : Pin 6. */
949 #define GPIO_OUTSET_PIN6_Low (0UL) /*!< Pin driver is low. */
950 #define GPIO_OUTSET_PIN6_High (1UL) /*!< Pin driver is high. */
951 #define GPIO_OUTSET_PIN6_Set (1UL) /*!< Set pin driver high. */
953 /* Bit 5 : Pin 5. */
956 #define GPIO_OUTSET_PIN5_Low (0UL) /*!< Pin driver is low. */
957 #define GPIO_OUTSET_PIN5_High (1UL) /*!< Pin driver is high. */
958 #define GPIO_OUTSET_PIN5_Set (1UL) /*!< Set pin driver high. */
960 /* Bit 4 : Pin 4. */
963 #define GPIO_OUTSET_PIN4_Low (0UL) /*!< Pin driver is low. */
964 #define GPIO_OUTSET_PIN4_High (1UL) /*!< Pin driver is high. */
965 #define GPIO_OUTSET_PIN4_Set (1UL) /*!< Set pin driver high. */
967 /* Bit 3 : Pin 3. */
970 #define GPIO_OUTSET_PIN3_Low (0UL) /*!< Pin driver is low. */
971 #define GPIO_OUTSET_PIN3_High (1UL) /*!< Pin driver is high. */
972 #define GPIO_OUTSET_PIN3_Set (1UL) /*!< Set pin driver high. */
974 /* Bit 2 : Pin 2. */
977 #define GPIO_OUTSET_PIN2_Low (0UL) /*!< Pin driver is low. */
978 #define GPIO_OUTSET_PIN2_High (1UL) /*!< Pin driver is high. */
979 #define GPIO_OUTSET_PIN2_Set (1UL) /*!< Set pin driver high. */
981 /* Bit 1 : Pin 1. */
984 #define GPIO_OUTSET_PIN1_Low (0UL) /*!< Pin driver is low. */
985 #define GPIO_OUTSET_PIN1_High (1UL) /*!< Pin driver is high. */
986 #define GPIO_OUTSET_PIN1_Set (1UL) /*!< Set pin driver high. */
988 /* Bit 0 : Pin 0. */
991 #define GPIO_OUTSET_PIN0_Low (0UL) /*!< Pin driver is low. */
992 #define GPIO_OUTSET_PIN0_High (1UL) /*!< Pin driver is high. */
993 #define GPIO_OUTSET_PIN0_Set (1UL) /*!< Set pin driver high. */
998 /* Bit 31 : Pin 31. */
1001 #define GPIO_OUTCLR_PIN31_Low (0UL) /*!< Pin driver is low. */
1002 #define GPIO_OUTCLR_PIN31_High (1UL) /*!< Pin driver is high. */
1003 #define GPIO_OUTCLR_PIN31_Clear (1UL) /*!< Set pin driver low. */
1005 /* Bit 30 : Pin 30. */
1008 #define GPIO_OUTCLR_PIN30_Low (0UL) /*!< Pin driver is low. */
1009 #define GPIO_OUTCLR_PIN30_High (1UL) /*!< Pin driver is high. */
1010 #define GPIO_OUTCLR_PIN30_Clear (1UL) /*!< Set pin driver low. */
1012 /* Bit 29 : Pin 29. */
1015 #define GPIO_OUTCLR_PIN29_Low (0UL) /*!< Pin driver is low. */
1016 #define GPIO_OUTCLR_PIN29_High (1UL) /*!< Pin driver is high. */
1017 #define GPIO_OUTCLR_PIN29_Clear (1UL) /*!< Set pin driver low. */
1019 /* Bit 28 : Pin 28. */
1022 #define GPIO_OUTCLR_PIN28_Low (0UL) /*!< Pin driver is low. */
1023 #define GPIO_OUTCLR_PIN28_High (1UL) /*!< Pin driver is high. */
1024 #define GPIO_OUTCLR_PIN28_Clear (1UL) /*!< Set pin driver low. */
1026 /* Bit 27 : Pin 27. */
1029 #define GPIO_OUTCLR_PIN27_Low (0UL) /*!< Pin driver is low. */
1030 #define GPIO_OUTCLR_PIN27_High (1UL) /*!< Pin driver is high. */
1031 #define GPIO_OUTCLR_PIN27_Clear (1UL) /*!< Set pin driver low. */
1033 /* Bit 26 : Pin 26. */
1036 #define GPIO_OUTCLR_PIN26_Low (0UL) /*!< Pin driver is low. */
1037 #define GPIO_OUTCLR_PIN26_High (1UL) /*!< Pin driver is high. */
1038 #define GPIO_OUTCLR_PIN26_Clear (1UL) /*!< Set pin driver low. */
1040 /* Bit 25 : Pin 25. */
1043 #define GPIO_OUTCLR_PIN25_Low (0UL) /*!< Pin driver is low. */
1044 #define GPIO_OUTCLR_PIN25_High (1UL) /*!< Pin driver is high. */
1045 #define GPIO_OUTCLR_PIN25_Clear (1UL) /*!< Set pin driver low. */
1047 /* Bit 24 : Pin 24. */
1050 #define GPIO_OUTCLR_PIN24_Low (0UL) /*!< Pin driver is low. */
1051 #define GPIO_OUTCLR_PIN24_High (1UL) /*!< Pin driver is high. */
1052 #define GPIO_OUTCLR_PIN24_Clear (1UL) /*!< Set pin driver low. */
1054 /* Bit 23 : Pin 23. */
1057 #define GPIO_OUTCLR_PIN23_Low (0UL) /*!< Pin driver is low. */
1058 #define GPIO_OUTCLR_PIN23_High (1UL) /*!< Pin driver is high. */
1059 #define GPIO_OUTCLR_PIN23_Clear (1UL) /*!< Set pin driver low. */
1061 /* Bit 22 : Pin 22. */
1064 #define GPIO_OUTCLR_PIN22_Low (0UL) /*!< Pin driver is low. */
1065 #define GPIO_OUTCLR_PIN22_High (1UL) /*!< Pin driver is high. */
1066 #define GPIO_OUTCLR_PIN22_Clear (1UL) /*!< Set pin driver low. */
1068 /* Bit 21 : Pin 21. */
1071 #define GPIO_OUTCLR_PIN21_Low (0UL) /*!< Pin driver is low. */
1072 #define GPIO_OUTCLR_PIN21_High (1UL) /*!< Pin driver is high. */
1073 #define GPIO_OUTCLR_PIN21_Clear (1UL) /*!< Set pin driver low. */
1075 /* Bit 20 : Pin 20. */
1078 #define GPIO_OUTCLR_PIN20_Low (0UL) /*!< Pin driver is low. */
1079 #define GPIO_OUTCLR_PIN20_High (1UL) /*!< Pin driver is high. */
1080 #define GPIO_OUTCLR_PIN20_Clear (1UL) /*!< Set pin driver low. */
1082 /* Bit 19 : Pin 19. */
1085 #define GPIO_OUTCLR_PIN19_Low (0UL) /*!< Pin driver is low. */
1086 #define GPIO_OUTCLR_PIN19_High (1UL) /*!< Pin driver is high. */
1087 #define GPIO_OUTCLR_PIN19_Clear (1UL) /*!< Set pin driver low. */
1089 /* Bit 18 : Pin 18. */
1092 #define GPIO_OUTCLR_PIN18_Low (0UL) /*!< Pin driver is low. */
1093 #define GPIO_OUTCLR_PIN18_High (1UL) /*!< Pin driver is high. */
1094 #define GPIO_OUTCLR_PIN18_Clear (1UL) /*!< Set pin driver low. */
1096 /* Bit 17 : Pin 17. */
1099 #define GPIO_OUTCLR_PIN17_Low (0UL) /*!< Pin driver is low. */
1100 #define GPIO_OUTCLR_PIN17_High (1UL) /*!< Pin driver is high. */
1101 #define GPIO_OUTCLR_PIN17_Clear (1UL) /*!< Set pin driver low. */
1103 /* Bit 16 : Pin 16. */
1106 #define GPIO_OUTCLR_PIN16_Low (0UL) /*!< Pin driver is low. */
1107 #define GPIO_OUTCLR_PIN16_High (1UL) /*!< Pin driver is high. */
1108 #define GPIO_OUTCLR_PIN16_Clear (1UL) /*!< Set pin driver low. */
1110 /* Bit 15 : Pin 15. */
1113 #define GPIO_OUTCLR_PIN15_Low (0UL) /*!< Pin driver is low. */
1114 #define GPIO_OUTCLR_PIN15_High (1UL) /*!< Pin driver is high. */
1115 #define GPIO_OUTCLR_PIN15_Clear (1UL) /*!< Set pin driver low. */
1117 /* Bit 14 : Pin 14. */
1120 #define GPIO_OUTCLR_PIN14_Low (0UL) /*!< Pin driver is low. */
1121 #define GPIO_OUTCLR_PIN14_High (1UL) /*!< Pin driver is high. */
1122 #define GPIO_OUTCLR_PIN14_Clear (1UL) /*!< Set pin driver low. */
1124 /* Bit 13 : Pin 13. */
1127 #define GPIO_OUTCLR_PIN13_Low (0UL) /*!< Pin driver is low. */
1128 #define GPIO_OUTCLR_PIN13_High (1UL) /*!< Pin driver is high. */
1129 #define GPIO_OUTCLR_PIN13_Clear (1UL) /*!< Set pin driver low. */
1131 /* Bit 12 : Pin 12. */
1134 #define GPIO_OUTCLR_PIN12_Low (0UL) /*!< Pin driver is low. */
1135 #define GPIO_OUTCLR_PIN12_High (1UL) /*!< Pin driver is high. */
1136 #define GPIO_OUTCLR_PIN12_Clear (1UL) /*!< Set pin driver low. */
1138 /* Bit 11 : Pin 11. */
1141 #define GPIO_OUTCLR_PIN11_Low (0UL) /*!< Pin driver is low. */
1142 #define GPIO_OUTCLR_PIN11_High (1UL) /*!< Pin driver is high. */
1143 #define GPIO_OUTCLR_PIN11_Clear (1UL) /*!< Set pin driver low. */
1145 /* Bit 10 : Pin 10. */
1148 #define GPIO_OUTCLR_PIN10_Low (0UL) /*!< Pin driver is low. */
1149 #define GPIO_OUTCLR_PIN10_High (1UL) /*!< Pin driver is high. */
1150 #define GPIO_OUTCLR_PIN10_Clear (1UL) /*!< Set pin driver low. */
1152 /* Bit 9 : Pin 9. */
1155 #define GPIO_OUTCLR_PIN9_Low (0UL) /*!< Pin driver is low. */
1156 #define GPIO_OUTCLR_PIN9_High (1UL) /*!< Pin driver is high. */
1157 #define GPIO_OUTCLR_PIN9_Clear (1UL) /*!< Set pin driver low. */
1159 /* Bit 8 : Pin 8. */
1162 #define GPIO_OUTCLR_PIN8_Low (0UL) /*!< Pin driver is low. */
1163 #define GPIO_OUTCLR_PIN8_High (1UL) /*!< Pin driver is high. */
1164 #define GPIO_OUTCLR_PIN8_Clear (1UL) /*!< Set pin driver low. */
1166 /* Bit 7 : Pin 7. */
1169 #define GPIO_OUTCLR_PIN7_Low (0UL) /*!< Pin driver is low. */
1170 #define GPIO_OUTCLR_PIN7_High (1UL) /*!< Pin driver is high. */
1171 #define GPIO_OUTCLR_PIN7_Clear (1UL) /*!< Set pin driver low. */
1173 /* Bit 6 : Pin 6. */
1176 #define GPIO_OUTCLR_PIN6_Low (0UL) /*!< Pin driver is low. */
1177 #define GPIO_OUTCLR_PIN6_High (1UL) /*!< Pin driver is high. */
1178 #define GPIO_OUTCLR_PIN6_Clear (1UL) /*!< Set pin driver low. */
1180 /* Bit 5 : Pin 5. */
1183 #define GPIO_OUTCLR_PIN5_Low (0UL) /*!< Pin driver is low. */
1184 #define GPIO_OUTCLR_PIN5_High (1UL) /*!< Pin driver is high. */
1185 #define GPIO_OUTCLR_PIN5_Clear (1UL) /*!< Set pin driver low. */
1187 /* Bit 4 : Pin 4. */
1190 #define GPIO_OUTCLR_PIN4_Low (0UL) /*!< Pin driver is low. */
1191 #define GPIO_OUTCLR_PIN4_High (1UL) /*!< Pin driver is high. */
1192 #define GPIO_OUTCLR_PIN4_Clear (1UL) /*!< Set pin driver low. */
1194 /* Bit 3 : Pin 3. */
1197 #define GPIO_OUTCLR_PIN3_Low (0UL) /*!< Pin driver is low. */
1198 #define GPIO_OUTCLR_PIN3_High (1UL) /*!< Pin driver is high. */
1199 #define GPIO_OUTCLR_PIN3_Clear (1UL) /*!< Set pin driver low. */
1201 /* Bit 2 : Pin 2. */
1204 #define GPIO_OUTCLR_PIN2_Low (0UL) /*!< Pin driver is low. */
1205 #define GPIO_OUTCLR_PIN2_High (1UL) /*!< Pin driver is high. */
1206 #define GPIO_OUTCLR_PIN2_Clear (1UL) /*!< Set pin driver low. */
1208 /* Bit 1 : Pin 1. */
1211 #define GPIO_OUTCLR_PIN1_Low (0UL) /*!< Pin driver is low. */
1212 #define GPIO_OUTCLR_PIN1_High (1UL) /*!< Pin driver is high. */
1213 #define GPIO_OUTCLR_PIN1_Clear (1UL) /*!< Set pin driver low. */
1215 /* Bit 0 : Pin 0. */
1218 #define GPIO_OUTCLR_PIN0_Low (0UL) /*!< Pin driver is low. */
1219 #define GPIO_OUTCLR_PIN0_High (1UL) /*!< Pin driver is high. */
1220 #define GPIO_OUTCLR_PIN0_Clear (1UL) /*!< Set pin driver low. */
1225 /* Bit 31 : Pin 31. */
1228 #define GPIO_IN_PIN31_Low (0UL) /*!< Pin input is low. */
1229 #define GPIO_IN_PIN31_High (1UL) /*!< Pin input is high. */
1231 /* Bit 30 : Pin 30. */
1234 #define GPIO_IN_PIN30_Low (0UL) /*!< Pin input is low. */
1235 #define GPIO_IN_PIN30_High (1UL) /*!< Pin input is high. */
1237 /* Bit 29 : Pin 29. */
1240 #define GPIO_IN_PIN29_Low (0UL) /*!< Pin input is low. */
1241 #define GPIO_IN_PIN29_High (1UL) /*!< Pin input is high. */
1243 /* Bit 28 : Pin 28. */
1246 #define GPIO_IN_PIN28_Low (0UL) /*!< Pin input is low. */
1247 #define GPIO_IN_PIN28_High (1UL) /*!< Pin input is high. */
1249 /* Bit 27 : Pin 27. */
1252 #define GPIO_IN_PIN27_Low (0UL) /*!< Pin input is low. */
1253 #define GPIO_IN_PIN27_High (1UL) /*!< Pin input is high. */
1255 /* Bit 26 : Pin 26. */
1258 #define GPIO_IN_PIN26_Low (0UL) /*!< Pin input is low. */
1259 #define GPIO_IN_PIN26_High (1UL) /*!< Pin input is high. */
1261 /* Bit 25 : Pin 25. */
1264 #define GPIO_IN_PIN25_Low (0UL) /*!< Pin input is low. */
1265 #define GPIO_IN_PIN25_High (1UL) /*!< Pin input is high. */
1267 /* Bit 24 : Pin 24. */
1270 #define GPIO_IN_PIN24_Low (0UL) /*!< Pin input is low. */
1271 #define GPIO_IN_PIN24_High (1UL) /*!< Pin input is high. */
1273 /* Bit 23 : Pin 23. */
1276 #define GPIO_IN_PIN23_Low (0UL) /*!< Pin input is low. */
1277 #define GPIO_IN_PIN23_High (1UL) /*!< Pin input is high. */
1279 /* Bit 22 : Pin 22. */
1282 #define GPIO_IN_PIN22_Low (0UL) /*!< Pin input is low. */
1283 #define GPIO_IN_PIN22_High (1UL) /*!< Pin input is high. */
1285 /* Bit 21 : Pin 21. */
1288 #define GPIO_IN_PIN21_Low (0UL) /*!< Pin input is low. */
1289 #define GPIO_IN_PIN21_High (1UL) /*!< Pin input is high. */
1291 /* Bit 20 : Pin 20. */
1294 #define GPIO_IN_PIN20_Low (0UL) /*!< Pin input is low. */
1295 #define GPIO_IN_PIN20_High (1UL) /*!< Pin input is high. */
1297 /* Bit 19 : Pin 19. */
1300 #define GPIO_IN_PIN19_Low (0UL) /*!< Pin input is low. */
1301 #define GPIO_IN_PIN19_High (1UL) /*!< Pin input is high. */
1303 /* Bit 18 : Pin 18. */
1306 #define GPIO_IN_PIN18_Low (0UL) /*!< Pin input is low. */
1307 #define GPIO_IN_PIN18_High (1UL) /*!< Pin input is high. */
1309 /* Bit 17 : Pin 17. */
1312 #define GPIO_IN_PIN17_Low (0UL) /*!< Pin input is low. */
1313 #define GPIO_IN_PIN17_High (1UL) /*!< Pin input is high. */
1315 /* Bit 16 : Pin 16. */
1318 #define GPIO_IN_PIN16_Low (0UL) /*!< Pin input is low. */
1319 #define GPIO_IN_PIN16_High (1UL) /*!< Pin input is high. */
1321 /* Bit 15 : Pin 15. */
1324 #define GPIO_IN_PIN15_Low (0UL) /*!< Pin input is low. */
1325 #define GPIO_IN_PIN15_High (1UL) /*!< Pin input is high. */
1327 /* Bit 14 : Pin 14. */
1330 #define GPIO_IN_PIN14_Low (0UL) /*!< Pin input is low. */
1331 #define GPIO_IN_PIN14_High (1UL) /*!< Pin input is high. */
1333 /* Bit 13 : Pin 13. */
1336 #define GPIO_IN_PIN13_Low (0UL) /*!< Pin input is low. */
1337 #define GPIO_IN_PIN13_High (1UL) /*!< Pin input is high. */
1339 /* Bit 12 : Pin 12. */
1342 #define GPIO_IN_PIN12_Low (0UL) /*!< Pin input is low. */
1343 #define GPIO_IN_PIN12_High (1UL) /*!< Pin input is high. */
1345 /* Bit 11 : Pin 11. */
1348 #define GPIO_IN_PIN11_Low (0UL) /*!< Pin input is low. */
1349 #define GPIO_IN_PIN11_High (1UL) /*!< Pin input is high. */
1351 /* Bit 10 : Pin 10. */
1354 #define GPIO_IN_PIN10_Low (0UL) /*!< Pin input is low. */
1355 #define GPIO_IN_PIN10_High (1UL) /*!< Pin input is high. */
1357 /* Bit 9 : Pin 9. */
1360 #define GPIO_IN_PIN9_Low (0UL) /*!< Pin input is low. */
1361 #define GPIO_IN_PIN9_High (1UL) /*!< Pin input is high. */
1363 /* Bit 8 : Pin 8. */
1366 #define GPIO_IN_PIN8_Low (0UL) /*!< Pin input is low. */
1367 #define GPIO_IN_PIN8_High (1UL) /*!< Pin input is high. */
1369 /* Bit 7 : Pin 7. */
1372 #define GPIO_IN_PIN7_Low (0UL) /*!< Pin input is low. */
1373 #define GPIO_IN_PIN7_High (1UL) /*!< Pin input is high. */
1375 /* Bit 6 : Pin 6. */
1378 #define GPIO_IN_PIN6_Low (0UL) /*!< Pin input is low. */
1379 #define GPIO_IN_PIN6_High (1UL) /*!< Pin input is high. */
1381 /* Bit 5 : Pin 5. */
1384 #define GPIO_IN_PIN5_Low (0UL) /*!< Pin input is low. */
1385 #define GPIO_IN_PIN5_High (1UL) /*!< Pin input is high. */
1387 /* Bit 4 : Pin 4. */
1390 #define GPIO_IN_PIN4_Low (0UL) /*!< Pin input is low. */
1391 #define GPIO_IN_PIN4_High (1UL) /*!< Pin input is high. */
1393 /* Bit 3 : Pin 3. */
1396 #define GPIO_IN_PIN3_Low (0UL) /*!< Pin input is low. */
1397 #define GPIO_IN_PIN3_High (1UL) /*!< Pin input is high. */
1399 /* Bit 2 : Pin 2. */
1402 #define GPIO_IN_PIN2_Low (0UL) /*!< Pin input is low. */
1403 #define GPIO_IN_PIN2_High (1UL) /*!< Pin input is high. */
1405 /* Bit 1 : Pin 1. */
1408 #define GPIO_IN_PIN1_Low (0UL) /*!< Pin input is low. */
1409 #define GPIO_IN_PIN1_High (1UL) /*!< Pin input is high. */
1411 /* Bit 0 : Pin 0. */
1414 #define GPIO_IN_PIN0_Low (0UL) /*!< Pin input is low. */
1415 #define GPIO_IN_PIN0_High (1UL) /*!< Pin input is high. */
1420 /* Bit 31 : Pin 31. */
1423 #define GPIO_DIR_PIN31_Input (0UL) /*!< Pin set as input. */
1424 #define GPIO_DIR_PIN31_Output (1UL) /*!< Pin set as output. */
1426 /* Bit 30 : Pin 30. */
1429 #define GPIO_DIR_PIN30_Input (0UL) /*!< Pin set as input. */
1430 #define GPIO_DIR_PIN30_Output (1UL) /*!< Pin set as output. */
1432 /* Bit 29 : Pin 29. */
1435 #define GPIO_DIR_PIN29_Input (0UL) /*!< Pin set as input. */
1436 #define GPIO_DIR_PIN29_Output (1UL) /*!< Pin set as output. */
1438 /* Bit 28 : Pin 28. */
1441 #define GPIO_DIR_PIN28_Input (0UL) /*!< Pin set as input. */
1442 #define GPIO_DIR_PIN28_Output (1UL) /*!< Pin set as output. */
1444 /* Bit 27 : Pin 27. */
1447 #define GPIO_DIR_PIN27_Input (0UL) /*!< Pin set as input. */
1448 #define GPIO_DIR_PIN27_Output (1UL) /*!< Pin set as output. */
1450 /* Bit 26 : Pin 26. */
1453 #define GPIO_DIR_PIN26_Input (0UL) /*!< Pin set as input. */
1454 #define GPIO_DIR_PIN26_Output (1UL) /*!< Pin set as output. */
1456 /* Bit 25 : Pin 25. */
1459 #define GPIO_DIR_PIN25_Input (0UL) /*!< Pin set as input. */
1460 #define GPIO_DIR_PIN25_Output (1UL) /*!< Pin set as output. */
1462 /* Bit 24 : Pin 24. */
1465 #define GPIO_DIR_PIN24_Input (0UL) /*!< Pin set as input. */
1466 #define GPIO_DIR_PIN24_Output (1UL) /*!< Pin set as output. */
1468 /* Bit 23 : Pin 23. */
1471 #define GPIO_DIR_PIN23_Input (0UL) /*!< Pin set as input. */
1472 #define GPIO_DIR_PIN23_Output (1UL) /*!< Pin set as output. */
1474 /* Bit 22 : Pin 22. */
1477 #define GPIO_DIR_PIN22_Input (0UL) /*!< Pin set as input. */
1478 #define GPIO_DIR_PIN22_Output (1UL) /*!< Pin set as output. */
1480 /* Bit 21 : Pin 21. */
1483 #define GPIO_DIR_PIN21_Input (0UL) /*!< Pin set as input. */
1484 #define GPIO_DIR_PIN21_Output (1UL) /*!< Pin set as output. */
1486 /* Bit 20 : Pin 20. */
1489 #define GPIO_DIR_PIN20_Input (0UL) /*!< Pin set as input. */
1490 #define GPIO_DIR_PIN20_Output (1UL) /*!< Pin set as output. */
1492 /* Bit 19 : Pin 19. */
1495 #define GPIO_DIR_PIN19_Input (0UL) /*!< Pin set as input. */
1496 #define GPIO_DIR_PIN19_Output (1UL) /*!< Pin set as output. */
1498 /* Bit 18 : Pin 18. */
1501 #define GPIO_DIR_PIN18_Input (0UL) /*!< Pin set as input. */
1502 #define GPIO_DIR_PIN18_Output (1UL) /*!< Pin set as output. */
1504 /* Bit 17 : Pin 17. */
1507 #define GPIO_DIR_PIN17_Input (0UL) /*!< Pin set as input. */
1508 #define GPIO_DIR_PIN17_Output (1UL) /*!< Pin set as output. */
1510 /* Bit 16 : Pin 16. */
1513 #define GPIO_DIR_PIN16_Input (0UL) /*!< Pin set as input. */
1514 #define GPIO_DIR_PIN16_Output (1UL) /*!< Pin set as output. */
1516 /* Bit 15 : Pin 15. */
1519 #define GPIO_DIR_PIN15_Input (0UL) /*!< Pin set as input. */
1520 #define GPIO_DIR_PIN15_Output (1UL) /*!< Pin set as output. */
1522 /* Bit 14 : Pin 14. */
1525 #define GPIO_DIR_PIN14_Input (0UL) /*!< Pin set as input. */
1526 #define GPIO_DIR_PIN14_Output (1UL) /*!< Pin set as output. */
1528 /* Bit 13 : Pin 13. */
1531 #define GPIO_DIR_PIN13_Input (0UL) /*!< Pin set as input. */
1532 #define GPIO_DIR_PIN13_Output (1UL) /*!< Pin set as output. */
1534 /* Bit 12 : Pin 12. */
1537 #define GPIO_DIR_PIN12_Input (0UL) /*!< Pin set as input. */
1538 #define GPIO_DIR_PIN12_Output (1UL) /*!< Pin set as output. */
1540 /* Bit 11 : Pin 11. */
1543 #define GPIO_DIR_PIN11_Input (0UL) /*!< Pin set as input. */
1544 #define GPIO_DIR_PIN11_Output (1UL) /*!< Pin set as output. */
1546 /* Bit 10 : Pin 10. */
1549 #define GPIO_DIR_PIN10_Input (0UL) /*!< Pin set as input. */
1550 #define GPIO_DIR_PIN10_Output (1UL) /*!< Pin set as output. */
1552 /* Bit 9 : Pin 9. */
1555 #define GPIO_DIR_PIN9_Input (0UL) /*!< Pin set as input. */
1556 #define GPIO_DIR_PIN9_Output (1UL) /*!< Pin set as output. */
1558 /* Bit 8 : Pin 8. */
1561 #define GPIO_DIR_PIN8_Input (0UL) /*!< Pin set as input. */
1562 #define GPIO_DIR_PIN8_Output (1UL) /*!< Pin set as output. */
1564 /* Bit 7 : Pin 7. */
1567 #define GPIO_DIR_PIN7_Input (0UL) /*!< Pin set as input. */
1568 #define GPIO_DIR_PIN7_Output (1UL) /*!< Pin set as output. */
1570 /* Bit 6 : Pin 6. */
1573 #define GPIO_DIR_PIN6_Input (0UL) /*!< Pin set as input. */
1574 #define GPIO_DIR_PIN6_Output (1UL) /*!< Pin set as output. */
1576 /* Bit 5 : Pin 5. */
1579 #define GPIO_DIR_PIN5_Input (0UL) /*!< Pin set as input. */
1580 #define GPIO_DIR_PIN5_Output (1UL) /*!< Pin set as output. */
1582 /* Bit 4 : Pin 4. */
1585 #define GPIO_DIR_PIN4_Input (0UL) /*!< Pin set as input. */
1586 #define GPIO_DIR_PIN4_Output (1UL) /*!< Pin set as output. */
1588 /* Bit 3 : Pin 3. */
1591 #define GPIO_DIR_PIN3_Input (0UL) /*!< Pin set as input. */
1592 #define GPIO_DIR_PIN3_Output (1UL) /*!< Pin set as output. */
1594 /* Bit 2 : Pin 2. */
1597 #define GPIO_DIR_PIN2_Input (0UL) /*!< Pin set as input. */
1598 #define GPIO_DIR_PIN2_Output (1UL) /*!< Pin set as output. */
1600 /* Bit 1 : Pin 1. */
1603 #define GPIO_DIR_PIN1_Input (0UL) /*!< Pin set as input. */
1604 #define GPIO_DIR_PIN1_Output (1UL) /*!< Pin set as output. */
1606 /* Bit 0 : Pin 0. */
1609 #define GPIO_DIR_PIN0_Input (0UL) /*!< Pin set as input. */
1610 #define GPIO_DIR_PIN0_Output (1UL) /*!< Pin set as output. */
1615 /* Bit 31 : Set as output pin 31. */
1618 #define GPIO_DIRSET_PIN31_Input (0UL) /*!< Pin set as input. */
1619 #define GPIO_DIRSET_PIN31_Output (1UL) /*!< Pin set as output. */
1620 #define GPIO_DIRSET_PIN31_Set (1UL) /*!< Set pin as output. */
1622 /* Bit 30 : Set as output pin 30. */
1625 #define GPIO_DIRSET_PIN30_Input (0UL) /*!< Pin set as input. */
1626 #define GPIO_DIRSET_PIN30_Output (1UL) /*!< Pin set as output. */
1627 #define GPIO_DIRSET_PIN30_Set (1UL) /*!< Set pin as output. */
1629 /* Bit 29 : Set as output pin 29. */
1632 #define GPIO_DIRSET_PIN29_Input (0UL) /*!< Pin set as input. */
1633 #define GPIO_DIRSET_PIN29_Output (1UL) /*!< Pin set as output. */
1634 #define GPIO_DIRSET_PIN29_Set (1UL) /*!< Set pin as output. */
1636 /* Bit 28 : Set as output pin 28. */
1639 #define GPIO_DIRSET_PIN28_Input (0UL) /*!< Pin set as input. */
1640 #define GPIO_DIRSET_PIN28_Output (1UL) /*!< Pin set as output. */
1641 #define GPIO_DIRSET_PIN28_Set (1UL) /*!< Set pin as output. */
1643 /* Bit 27 : Set as output pin 27. */
1646 #define GPIO_DIRSET_PIN27_Input (0UL) /*!< Pin set as input. */
1647 #define GPIO_DIRSET_PIN27_Output (1UL) /*!< Pin set as output. */
1648 #define GPIO_DIRSET_PIN27_Set (1UL) /*!< Set pin as output. */
1650 /* Bit 26 : Set as output pin 26. */
1653 #define GPIO_DIRSET_PIN26_Input (0UL) /*!< Pin set as input. */
1654 #define GPIO_DIRSET_PIN26_Output (1UL) /*!< Pin set as output. */
1655 #define GPIO_DIRSET_PIN26_Set (1UL) /*!< Set pin as output. */
1657 /* Bit 25 : Set as output pin 25. */
1660 #define GPIO_DIRSET_PIN25_Input (0UL) /*!< Pin set as input. */
1661 #define GPIO_DIRSET_PIN25_Output (1UL) /*!< Pin set as output. */
1662 #define GPIO_DIRSET_PIN25_Set (1UL) /*!< Set pin as output. */
1664 /* Bit 24 : Set as output pin 24. */
1667 #define GPIO_DIRSET_PIN24_Input (0UL) /*!< Pin set as input. */
1668 #define GPIO_DIRSET_PIN24_Output (1UL) /*!< Pin set as output. */
1669 #define GPIO_DIRSET_PIN24_Set (1UL) /*!< Set pin as output. */
1671 /* Bit 23 : Set as output pin 23. */
1674 #define GPIO_DIRSET_PIN23_Input (0UL) /*!< Pin set as input. */
1675 #define GPIO_DIRSET_PIN23_Output (1UL) /*!< Pin set as output. */
1676 #define GPIO_DIRSET_PIN23_Set (1UL) /*!< Set pin as output. */
1678 /* Bit 22 : Set as output pin 22. */
1681 #define GPIO_DIRSET_PIN22_Input (0UL) /*!< Pin set as input. */
1682 #define GPIO_DIRSET_PIN22_Output (1UL) /*!< Pin set as output. */
1683 #define GPIO_DIRSET_PIN22_Set (1UL) /*!< Set pin as output. */
1685 /* Bit 21 : Set as output pin 21. */
1688 #define GPIO_DIRSET_PIN21_Input (0UL) /*!< Pin set as input. */
1689 #define GPIO_DIRSET_PIN21_Output (1UL) /*!< Pin set as output. */
1690 #define GPIO_DIRSET_PIN21_Set (1UL) /*!< Set pin as output. */
1692 /* Bit 20 : Set as output pin 20. */
1695 #define GPIO_DIRSET_PIN20_Input (0UL) /*!< Pin set as input. */
1696 #define GPIO_DIRSET_PIN20_Output (1UL) /*!< Pin set as output. */
1697 #define GPIO_DIRSET_PIN20_Set (1UL) /*!< Set pin as output. */
1699 /* Bit 19 : Set as output pin 19. */
1702 #define GPIO_DIRSET_PIN19_Input (0UL) /*!< Pin set as input. */
1703 #define GPIO_DIRSET_PIN19_Output (1UL) /*!< Pin set as output. */
1704 #define GPIO_DIRSET_PIN19_Set (1UL) /*!< Set pin as output. */
1706 /* Bit 18 : Set as output pin 18. */
1709 #define GPIO_DIRSET_PIN18_Input (0UL) /*!< Pin set as input. */
1710 #define GPIO_DIRSET_PIN18_Output (1UL) /*!< Pin set as output. */
1711 #define GPIO_DIRSET_PIN18_Set (1UL) /*!< Set pin as output. */
1713 /* Bit 17 : Set as output pin 17. */
1716 #define GPIO_DIRSET_PIN17_Input (0UL) /*!< Pin set as input. */
1717 #define GPIO_DIRSET_PIN17_Output (1UL) /*!< Pin set as output. */
1718 #define GPIO_DIRSET_PIN17_Set (1UL) /*!< Set pin as output. */
1720 /* Bit 16 : Set as output pin 16. */
1723 #define GPIO_DIRSET_PIN16_Input (0UL) /*!< Pin set as input. */
1724 #define GPIO_DIRSET_PIN16_Output (1UL) /*!< Pin set as output. */
1725 #define GPIO_DIRSET_PIN16_Set (1UL) /*!< Set pin as output. */
1727 /* Bit 15 : Set as output pin 15. */
1730 #define GPIO_DIRSET_PIN15_Input (0UL) /*!< Pin set as input. */
1731 #define GPIO_DIRSET_PIN15_Output (1UL) /*!< Pin set as output. */
1732 #define GPIO_DIRSET_PIN15_Set (1UL) /*!< Set pin as output. */
1734 /* Bit 14 : Set as output pin 14. */
1737 #define GPIO_DIRSET_PIN14_Input (0UL) /*!< Pin set as input. */
1738 #define GPIO_DIRSET_PIN14_Output (1UL) /*!< Pin set as output. */
1739 #define GPIO_DIRSET_PIN14_Set (1UL) /*!< Set pin as output. */
1741 /* Bit 13 : Set as output pin 13. */
1744 #define GPIO_DIRSET_PIN13_Input (0UL) /*!< Pin set as input. */
1745 #define GPIO_DIRSET_PIN13_Output (1UL) /*!< Pin set as output. */
1746 #define GPIO_DIRSET_PIN13_Set (1UL) /*!< Set pin as output. */
1748 /* Bit 12 : Set as output pin 12. */
1751 #define GPIO_DIRSET_PIN12_Input (0UL) /*!< Pin set as input. */
1752 #define GPIO_DIRSET_PIN12_Output (1UL) /*!< Pin set as output. */
1753 #define GPIO_DIRSET_PIN12_Set (1UL) /*!< Set pin as output. */
1755 /* Bit 11 : Set as output pin 11. */
1758 #define GPIO_DIRSET_PIN11_Input (0UL) /*!< Pin set as input. */
1759 #define GPIO_DIRSET_PIN11_Output (1UL) /*!< Pin set as output. */
1760 #define GPIO_DIRSET_PIN11_Set (1UL) /*!< Set pin as output. */
1762 /* Bit 10 : Set as output pin 10. */
1765 #define GPIO_DIRSET_PIN10_Input (0UL) /*!< Pin set as input. */
1766 #define GPIO_DIRSET_PIN10_Output (1UL) /*!< Pin set as output. */
1767 #define GPIO_DIRSET_PIN10_Set (1UL) /*!< Set pin as output. */
1769 /* Bit 9 : Set as output pin 9. */
1772 #define GPIO_DIRSET_PIN9_Input (0UL) /*!< Pin set as input. */
1773 #define GPIO_DIRSET_PIN9_Output (1UL) /*!< Pin set as output. */
1774 #define GPIO_DIRSET_PIN9_Set (1UL) /*!< Set pin as output. */
1776 /* Bit 8 : Set as output pin 8. */
1779 #define GPIO_DIRSET_PIN8_Input (0UL) /*!< Pin set as input. */
1780 #define GPIO_DIRSET_PIN8_Output (1UL) /*!< Pin set as output. */
1781 #define GPIO_DIRSET_PIN8_Set (1UL) /*!< Set pin as output. */
1783 /* Bit 7 : Set as output pin 7. */
1786 #define GPIO_DIRSET_PIN7_Input (0UL) /*!< Pin set as input. */
1787 #define GPIO_DIRSET_PIN7_Output (1UL) /*!< Pin set as output. */
1788 #define GPIO_DIRSET_PIN7_Set (1UL) /*!< Set pin as output. */
1790 /* Bit 6 : Set as output pin 6. */
1793 #define GPIO_DIRSET_PIN6_Input (0UL) /*!< Pin set as input. */
1794 #define GPIO_DIRSET_PIN6_Output (1UL) /*!< Pin set as output. */
1795 #define GPIO_DIRSET_PIN6_Set (1UL) /*!< Set pin as output. */
1797 /* Bit 5 : Set as output pin 5. */
1800 #define GPIO_DIRSET_PIN5_Input (0UL) /*!< Pin set as input. */
1801 #define GPIO_DIRSET_PIN5_Output (1UL) /*!< Pin set as output. */
1802 #define GPIO_DIRSET_PIN5_Set (1UL) /*!< Set pin as output. */
1804 /* Bit 4 : Set as output pin 4. */
1807 #define GPIO_DIRSET_PIN4_Input (0UL) /*!< Pin set as input. */
1808 #define GPIO_DIRSET_PIN4_Output (1UL) /*!< Pin set as output. */
1809 #define GPIO_DIRSET_PIN4_Set (1UL) /*!< Set pin as output. */
1811 /* Bit 3 : Set as output pin 3. */
1814 #define GPIO_DIRSET_PIN3_Input (0UL) /*!< Pin set as input. */
1815 #define GPIO_DIRSET_PIN3_Output (1UL) /*!< Pin set as output. */
1816 #define GPIO_DIRSET_PIN3_Set (1UL) /*!< Set pin as output. */
1818 /* Bit 2 : Set as output pin 2. */
1821 #define GPIO_DIRSET_PIN2_Input (0UL) /*!< Pin set as input. */
1822 #define GPIO_DIRSET_PIN2_Output (1UL) /*!< Pin set as output. */
1823 #define GPIO_DIRSET_PIN2_Set (1UL) /*!< Set pin as output. */
1825 /* Bit 1 : Set as output pin 1. */
1828 #define GPIO_DIRSET_PIN1_Input (0UL) /*!< Pin set as input. */
1829 #define GPIO_DIRSET_PIN1_Output (1UL) /*!< Pin set as output. */
1830 #define GPIO_DIRSET_PIN1_Set (1UL) /*!< Set pin as output. */
1832 /* Bit 0 : Set as output pin 0. */
1835 #define GPIO_DIRSET_PIN0_Input (0UL) /*!< Pin set as input. */
1836 #define GPIO_DIRSET_PIN0_Output (1UL) /*!< Pin set as output. */
1837 #define GPIO_DIRSET_PIN0_Set (1UL) /*!< Set pin as output. */
1842 /* Bit 31 : Set as input pin 31. */
1845 #define GPIO_DIRCLR_PIN31_Input (0UL) /*!< Pin set as input. */
1846 #define GPIO_DIRCLR_PIN31_Output (1UL) /*!< Pin set as output. */
1847 #define GPIO_DIRCLR_PIN31_Clear (1UL) /*!< Set pin as input. */
1849 /* Bit 30 : Set as input pin 30. */
1852 #define GPIO_DIRCLR_PIN30_Input (0UL) /*!< Pin set as input. */
1853 #define GPIO_DIRCLR_PIN30_Output (1UL) /*!< Pin set as output. */
1854 #define GPIO_DIRCLR_PIN30_Clear (1UL) /*!< Set pin as input. */
1856 /* Bit 29 : Set as input pin 29. */
1859 #define GPIO_DIRCLR_PIN29_Input (0UL) /*!< Pin set as input. */
1860 #define GPIO_DIRCLR_PIN29_Output (1UL) /*!< Pin set as output. */
1861 #define GPIO_DIRCLR_PIN29_Clear (1UL) /*!< Set pin as input. */
1863 /* Bit 28 : Set as input pin 28. */
1866 #define GPIO_DIRCLR_PIN28_Input (0UL) /*!< Pin set as input. */
1867 #define GPIO_DIRCLR_PIN28_Output (1UL) /*!< Pin set as output. */
1868 #define GPIO_DIRCLR_PIN28_Clear (1UL) /*!< Set pin as input. */
1870 /* Bit 27 : Set as input pin 27. */
1873 #define GPIO_DIRCLR_PIN27_Input (0UL) /*!< Pin set as input. */
1874 #define GPIO_DIRCLR_PIN27_Output (1UL) /*!< Pin set as output. */
1875 #define GPIO_DIRCLR_PIN27_Clear (1UL) /*!< Set pin as input. */
1877 /* Bit 26 : Set as input pin 26. */
1880 #define GPIO_DIRCLR_PIN26_Input (0UL) /*!< Pin set as input. */
1881 #define GPIO_DIRCLR_PIN26_Output (1UL) /*!< Pin set as output. */
1882 #define GPIO_DIRCLR_PIN26_Clear (1UL) /*!< Set pin as input. */
1884 /* Bit 25 : Set as input pin 25. */
1887 #define GPIO_DIRCLR_PIN25_Input (0UL) /*!< Pin set as input. */
1888 #define GPIO_DIRCLR_PIN25_Output (1UL) /*!< Pin set as output. */
1889 #define GPIO_DIRCLR_PIN25_Clear (1UL) /*!< Set pin as input. */
1891 /* Bit 24 : Set as input pin 24. */
1894 #define GPIO_DIRCLR_PIN24_Input (0UL) /*!< Pin set as input. */
1895 #define GPIO_DIRCLR_PIN24_Output (1UL) /*!< Pin set as output. */
1896 #define GPIO_DIRCLR_PIN24_Clear (1UL) /*!< Set pin as input. */
1898 /* Bit 23 : Set as input pin 23. */
1901 #define GPIO_DIRCLR_PIN23_Input (0UL) /*!< Pin set as input. */
1902 #define GPIO_DIRCLR_PIN23_Output (1UL) /*!< Pin set as output. */
1903 #define GPIO_DIRCLR_PIN23_Clear (1UL) /*!< Set pin as input. */
1905 /* Bit 22 : Set as input pin 22. */
1908 #define GPIO_DIRCLR_PIN22_Input (0UL) /*!< Pin set as input. */
1909 #define GPIO_DIRCLR_PIN22_Output (1UL) /*!< Pin set as output. */
1910 #define GPIO_DIRCLR_PIN22_Clear (1UL) /*!< Set pin as input. */
1912 /* Bit 21 : Set as input pin 21. */
1915 #define GPIO_DIRCLR_PIN21_Input (0UL) /*!< Pin set as input. */
1916 #define GPIO_DIRCLR_PIN21_Output (1UL) /*!< Pin set as output. */
1917 #define GPIO_DIRCLR_PIN21_Clear (1UL) /*!< Set pin as input. */
1919 /* Bit 20 : Set as input pin 20. */
1922 #define GPIO_DIRCLR_PIN20_Input (0UL) /*!< Pin set as input. */
1923 #define GPIO_DIRCLR_PIN20_Output (1UL) /*!< Pin set as output. */
1924 #define GPIO_DIRCLR_PIN20_Clear (1UL) /*!< Set pin as input. */
1926 /* Bit 19 : Set as input pin 19. */
1929 #define GPIO_DIRCLR_PIN19_Input (0UL) /*!< Pin set as input. */
1930 #define GPIO_DIRCLR_PIN19_Output (1UL) /*!< Pin set as output. */
1931 #define GPIO_DIRCLR_PIN19_Clear (1UL) /*!< Set pin as input. */
1933 /* Bit 18 : Set as input pin 18. */
1936 #define GPIO_DIRCLR_PIN18_Input (0UL) /*!< Pin set as input. */
1937 #define GPIO_DIRCLR_PIN18_Output (1UL) /*!< Pin set as output. */
1938 #define GPIO_DIRCLR_PIN18_Clear (1UL) /*!< Set pin as input. */
1940 /* Bit 17 : Set as input pin 17. */
1943 #define GPIO_DIRCLR_PIN17_Input (0UL) /*!< Pin set as input. */
1944 #define GPIO_DIRCLR_PIN17_Output (1UL) /*!< Pin set as output. */
1945 #define GPIO_DIRCLR_PIN17_Clear (1UL) /*!< Set pin as input. */
1947 /* Bit 16 : Set as input pin 16. */
1950 #define GPIO_DIRCLR_PIN16_Input (0UL) /*!< Pin set as input. */
1951 #define GPIO_DIRCLR_PIN16_Output (1UL) /*!< Pin set as output. */
1952 #define GPIO_DIRCLR_PIN16_Clear (1UL) /*!< Set pin as input. */
1954 /* Bit 15 : Set as input pin 15. */
1957 #define GPIO_DIRCLR_PIN15_Input (0UL) /*!< Pin set as input. */
1958 #define GPIO_DIRCLR_PIN15_Output (1UL) /*!< Pin set as output. */
1959 #define GPIO_DIRCLR_PIN15_Clear (1UL) /*!< Set pin as input. */
1961 /* Bit 14 : Set as input pin 14. */
1964 #define GPIO_DIRCLR_PIN14_Input (0UL) /*!< Pin set as input. */
1965 #define GPIO_DIRCLR_PIN14_Output (1UL) /*!< Pin set as output. */
1966 #define GPIO_DIRCLR_PIN14_Clear (1UL) /*!< Set pin as input. */
1968 /* Bit 13 : Set as input pin 13. */
1971 #define GPIO_DIRCLR_PIN13_Input (0UL) /*!< Pin set as input. */
1972 #define GPIO_DIRCLR_PIN13_Output (1UL) /*!< Pin set as output. */
1973 #define GPIO_DIRCLR_PIN13_Clear (1UL) /*!< Set pin as input. */
1975 /* Bit 12 : Set as input pin 12. */
1978 #define GPIO_DIRCLR_PIN12_Input (0UL) /*!< Pin set as input. */
1979 #define GPIO_DIRCLR_PIN12_Output (1UL) /*!< Pin set as output. */
1980 #define GPIO_DIRCLR_PIN12_Clear (1UL) /*!< Set pin as input. */
1982 /* Bit 11 : Set as input pin 11. */
1985 #define GPIO_DIRCLR_PIN11_Input (0UL) /*!< Pin set as input. */
1986 #define GPIO_DIRCLR_PIN11_Output (1UL) /*!< Pin set as output. */
1987 #define GPIO_DIRCLR_PIN11_Clear (1UL) /*!< Set pin as input. */
1989 /* Bit 10 : Set as input pin 10. */
1992 #define GPIO_DIRCLR_PIN10_Input (0UL) /*!< Pin set as input. */
1993 #define GPIO_DIRCLR_PIN10_Output (1UL) /*!< Pin set as output. */
1994 #define GPIO_DIRCLR_PIN10_Clear (1UL) /*!< Set pin as input. */
1996 /* Bit 9 : Set as input pin 9. */
1999 #define GPIO_DIRCLR_PIN9_Input (0UL) /*!< Pin set as input. */
2000 #define GPIO_DIRCLR_PIN9_Output (1UL) /*!< Pin set as output. */
2001 #define GPIO_DIRCLR_PIN9_Clear (1UL) /*!< Set pin as input. */
2003 /* Bit 8 : Set as input pin 8. */
2006 #define GPIO_DIRCLR_PIN8_Input (0UL) /*!< Pin set as input. */
2007 #define GPIO_DIRCLR_PIN8_Output (1UL) /*!< Pin set as output. */
2008 #define GPIO_DIRCLR_PIN8_Clear (1UL) /*!< Set pin as input. */
2010 /* Bit 7 : Set as input pin 7. */
2013 #define GPIO_DIRCLR_PIN7_Input (0UL) /*!< Pin set as input. */
2014 #define GPIO_DIRCLR_PIN7_Output (1UL) /*!< Pin set as output. */
2015 #define GPIO_DIRCLR_PIN7_Clear (1UL) /*!< Set pin as input. */
2017 /* Bit 6 : Set as input pin 6. */
2020 #define GPIO_DIRCLR_PIN6_Input (0UL) /*!< Pin set as input. */
2021 #define GPIO_DIRCLR_PIN6_Output (1UL) /*!< Pin set as output. */
2022 #define GPIO_DIRCLR_PIN6_Clear (1UL) /*!< Set pin as input. */
2024 /* Bit 5 : Set as input pin 5. */
2027 #define GPIO_DIRCLR_PIN5_Input (0UL) /*!< Pin set as input. */
2028 #define GPIO_DIRCLR_PIN5_Output (1UL) /*!< Pin set as output. */
2029 #define GPIO_DIRCLR_PIN5_Clear (1UL) /*!< Set pin as input. */
2031 /* Bit 4 : Set as input pin 4. */
2034 #define GPIO_DIRCLR_PIN4_Input (0UL) /*!< Pin set as input. */
2035 #define GPIO_DIRCLR_PIN4_Output (1UL) /*!< Pin set as output. */
2036 #define GPIO_DIRCLR_PIN4_Clear (1UL) /*!< Set pin as input. */
2038 /* Bit 3 : Set as input pin 3. */
2041 #define GPIO_DIRCLR_PIN3_Input (0UL) /*!< Pin set as input. */
2042 #define GPIO_DIRCLR_PIN3_Output (1UL) /*!< Pin set as output. */
2043 #define GPIO_DIRCLR_PIN3_Clear (1UL) /*!< Set pin as input. */
2045 /* Bit 2 : Set as input pin 2. */
2048 #define GPIO_DIRCLR_PIN2_Input (0UL) /*!< Pin set as input. */
2049 #define GPIO_DIRCLR_PIN2_Output (1UL) /*!< Pin set as output. */
2050 #define GPIO_DIRCLR_PIN2_Clear (1UL) /*!< Set pin as input. */
2052 /* Bit 1 : Set as input pin 1. */
2055 #define GPIO_DIRCLR_PIN1_Input (0UL) /*!< Pin set as input. */
2056 #define GPIO_DIRCLR_PIN1_Output (1UL) /*!< Pin set as output. */
2057 #define GPIO_DIRCLR_PIN1_Clear (1UL) /*!< Set pin as input. */
2059 /* Bit 0 : Set as input pin 0. */
2062 #define GPIO_DIRCLR_PIN0_Input (0UL) /*!< Pin set as input. */
2063 #define GPIO_DIRCLR_PIN0_Output (1UL) /*!< Pin set as output. */
2064 #define GPIO_DIRCLR_PIN0_Clear (1UL) /*!< Set pin as input. */
2069 /* Bits 17..16 : Pin sensing mechanism. */
2092 #define GPIO_PIN_CNF_PULL_Pulldown (0x01UL) /*!< Pulldown on pin. */
2093 #define GPIO_PIN_CNF_PULL_Pullup (0x03UL) /*!< Pullup on pin. */
2098 #define GPIO_PIN_CNF_INPUT_Connect (0UL) /*!< Connect input pin. */
2099 #define GPIO_PIN_CNF_INPUT_Disconnect (1UL) /*!< Disconnect input pin. */
2101 /* Bit 0 : Pin direction. */
2104 #define GPIO_PIN_CNF_DIR_Input (0UL) /*!< Configure pin as an input pin. */
2105 #define GPIO_PIN_CNF_DIR_Output (1UL) /*!< Configure pin as an output pin. */
2204 /* Bits 12..8 : Pin select. */
2342 /* Description: Input pin select. */
2344 /* Bits 2..0 : Analog input pin select. */
2374 /* Bit 0 : External analog reference pin selection. */
3107 /* Bit 0 : Reset from pin-reset detected. */
3200 /* Description: Pin reset functionality configuration register. This register is a retained registe…
3202 /* Bit 0 : Enable or disable pin reset in debug interface mode. */
3205 #define POWER_RESET_RESET_Disabled (0UL) /*!< Pin reset in debug interface mode disabled. */
3206 #define POWER_RESET_RESET_Enabled (1UL) /*!< Pin reset in debug interface mode enabled. */
4080 /* Description: LED output pin polarity. */
4082 /* Bit 0 : LED output pin polarity. */