Lines Matching full:input

161 … is enabled. If an analog input pin is selected as source of the conversion, the selected pin is c…
176 #define ADC_CONFIG_PSEL_Disabled (0UL) /*!< Analog input pins disabled. */
177 #define ADC_CONFIG_PSEL_AnalogInput0 (1UL) /*!< Use analog input 0 as analog input. */
178 #define ADC_CONFIG_PSEL_AnalogInput1 (2UL) /*!< Use analog input 1 as analog input. */
179 #define ADC_CONFIG_PSEL_AnalogInput2 (4UL) /*!< Use analog input 2 as analog input. */
180 #define ADC_CONFIG_PSEL_AnalogInput3 (8UL) /*!< Use analog input 3 as analog input. */
181 #define ADC_CONFIG_PSEL_AnalogInput4 (16UL) /*!< Use analog input 4 as analog input. */
182 #define ADC_CONFIG_PSEL_AnalogInput5 (32UL) /*!< Use analog input 5 as analog input. */
183 #define ADC_CONFIG_PSEL_AnalogInput6 (64UL) /*!< Use analog input 6 as analog input. */
184 #define ADC_CONFIG_PSEL_AnalogInput7 (128UL) /*!< Use analog input 7 as analog input. */
194 /* Bits 4..2 : ADC input selection. */
197 …EL_AnalogInputNoPrescaling (0x00UL) /*!< Analog input specified by PSEL with no prescaling used as…
198 …ogInputTwoThirdsPrescaling (0x01UL) /*!< Analog input specified by PSEL with 2/3 prescaling used a…
199 …logInputOneThirdPrescaling (0x02UL) /*!< Analog input specified by PSEL with 1/3 prescaling used a…
200 …ThirdsPrescaling (0x05UL) /*!< Supply voltage with 2/3 prescaling used as input for the conversion…
201 …eThirdPrescaling (0x06UL) /*!< Supply voltage with 1/3 prescaling used as input for the conversion…
571 /* Description: General purpose input and output. */
1228 #define GPIO_IN_PIN31_Low (0UL) /*!< Pin input is low. */
1229 #define GPIO_IN_PIN31_High (1UL) /*!< Pin input is high. */
1234 #define GPIO_IN_PIN30_Low (0UL) /*!< Pin input is low. */
1235 #define GPIO_IN_PIN30_High (1UL) /*!< Pin input is high. */
1240 #define GPIO_IN_PIN29_Low (0UL) /*!< Pin input is low. */
1241 #define GPIO_IN_PIN29_High (1UL) /*!< Pin input is high. */
1246 #define GPIO_IN_PIN28_Low (0UL) /*!< Pin input is low. */
1247 #define GPIO_IN_PIN28_High (1UL) /*!< Pin input is high. */
1252 #define GPIO_IN_PIN27_Low (0UL) /*!< Pin input is low. */
1253 #define GPIO_IN_PIN27_High (1UL) /*!< Pin input is high. */
1258 #define GPIO_IN_PIN26_Low (0UL) /*!< Pin input is low. */
1259 #define GPIO_IN_PIN26_High (1UL) /*!< Pin input is high. */
1264 #define GPIO_IN_PIN25_Low (0UL) /*!< Pin input is low. */
1265 #define GPIO_IN_PIN25_High (1UL) /*!< Pin input is high. */
1270 #define GPIO_IN_PIN24_Low (0UL) /*!< Pin input is low. */
1271 #define GPIO_IN_PIN24_High (1UL) /*!< Pin input is high. */
1276 #define GPIO_IN_PIN23_Low (0UL) /*!< Pin input is low. */
1277 #define GPIO_IN_PIN23_High (1UL) /*!< Pin input is high. */
1282 #define GPIO_IN_PIN22_Low (0UL) /*!< Pin input is low. */
1283 #define GPIO_IN_PIN22_High (1UL) /*!< Pin input is high. */
1288 #define GPIO_IN_PIN21_Low (0UL) /*!< Pin input is low. */
1289 #define GPIO_IN_PIN21_High (1UL) /*!< Pin input is high. */
1294 #define GPIO_IN_PIN20_Low (0UL) /*!< Pin input is low. */
1295 #define GPIO_IN_PIN20_High (1UL) /*!< Pin input is high. */
1300 #define GPIO_IN_PIN19_Low (0UL) /*!< Pin input is low. */
1301 #define GPIO_IN_PIN19_High (1UL) /*!< Pin input is high. */
1306 #define GPIO_IN_PIN18_Low (0UL) /*!< Pin input is low. */
1307 #define GPIO_IN_PIN18_High (1UL) /*!< Pin input is high. */
1312 #define GPIO_IN_PIN17_Low (0UL) /*!< Pin input is low. */
1313 #define GPIO_IN_PIN17_High (1UL) /*!< Pin input is high. */
1318 #define GPIO_IN_PIN16_Low (0UL) /*!< Pin input is low. */
1319 #define GPIO_IN_PIN16_High (1UL) /*!< Pin input is high. */
1324 #define GPIO_IN_PIN15_Low (0UL) /*!< Pin input is low. */
1325 #define GPIO_IN_PIN15_High (1UL) /*!< Pin input is high. */
1330 #define GPIO_IN_PIN14_Low (0UL) /*!< Pin input is low. */
1331 #define GPIO_IN_PIN14_High (1UL) /*!< Pin input is high. */
1336 #define GPIO_IN_PIN13_Low (0UL) /*!< Pin input is low. */
1337 #define GPIO_IN_PIN13_High (1UL) /*!< Pin input is high. */
1342 #define GPIO_IN_PIN12_Low (0UL) /*!< Pin input is low. */
1343 #define GPIO_IN_PIN12_High (1UL) /*!< Pin input is high. */
1348 #define GPIO_IN_PIN11_Low (0UL) /*!< Pin input is low. */
1349 #define GPIO_IN_PIN11_High (1UL) /*!< Pin input is high. */
1354 #define GPIO_IN_PIN10_Low (0UL) /*!< Pin input is low. */
1355 #define GPIO_IN_PIN10_High (1UL) /*!< Pin input is high. */
1360 #define GPIO_IN_PIN9_Low (0UL) /*!< Pin input is low. */
1361 #define GPIO_IN_PIN9_High (1UL) /*!< Pin input is high. */
1366 #define GPIO_IN_PIN8_Low (0UL) /*!< Pin input is low. */
1367 #define GPIO_IN_PIN8_High (1UL) /*!< Pin input is high. */
1372 #define GPIO_IN_PIN7_Low (0UL) /*!< Pin input is low. */
1373 #define GPIO_IN_PIN7_High (1UL) /*!< Pin input is high. */
1378 #define GPIO_IN_PIN6_Low (0UL) /*!< Pin input is low. */
1379 #define GPIO_IN_PIN6_High (1UL) /*!< Pin input is high. */
1384 #define GPIO_IN_PIN5_Low (0UL) /*!< Pin input is low. */
1385 #define GPIO_IN_PIN5_High (1UL) /*!< Pin input is high. */
1390 #define GPIO_IN_PIN4_Low (0UL) /*!< Pin input is low. */
1391 #define GPIO_IN_PIN4_High (1UL) /*!< Pin input is high. */
1396 #define GPIO_IN_PIN3_Low (0UL) /*!< Pin input is low. */
1397 #define GPIO_IN_PIN3_High (1UL) /*!< Pin input is high. */
1402 #define GPIO_IN_PIN2_Low (0UL) /*!< Pin input is low. */
1403 #define GPIO_IN_PIN2_High (1UL) /*!< Pin input is high. */
1408 #define GPIO_IN_PIN1_Low (0UL) /*!< Pin input is low. */
1409 #define GPIO_IN_PIN1_High (1UL) /*!< Pin input is high. */
1414 #define GPIO_IN_PIN0_Low (0UL) /*!< Pin input is low. */
1415 #define GPIO_IN_PIN0_High (1UL) /*!< Pin input is high. */
1423 #define GPIO_DIR_PIN31_Input (0UL) /*!< Pin set as input. */
1429 #define GPIO_DIR_PIN30_Input (0UL) /*!< Pin set as input. */
1435 #define GPIO_DIR_PIN29_Input (0UL) /*!< Pin set as input. */
1441 #define GPIO_DIR_PIN28_Input (0UL) /*!< Pin set as input. */
1447 #define GPIO_DIR_PIN27_Input (0UL) /*!< Pin set as input. */
1453 #define GPIO_DIR_PIN26_Input (0UL) /*!< Pin set as input. */
1459 #define GPIO_DIR_PIN25_Input (0UL) /*!< Pin set as input. */
1465 #define GPIO_DIR_PIN24_Input (0UL) /*!< Pin set as input. */
1471 #define GPIO_DIR_PIN23_Input (0UL) /*!< Pin set as input. */
1477 #define GPIO_DIR_PIN22_Input (0UL) /*!< Pin set as input. */
1483 #define GPIO_DIR_PIN21_Input (0UL) /*!< Pin set as input. */
1489 #define GPIO_DIR_PIN20_Input (0UL) /*!< Pin set as input. */
1495 #define GPIO_DIR_PIN19_Input (0UL) /*!< Pin set as input. */
1501 #define GPIO_DIR_PIN18_Input (0UL) /*!< Pin set as input. */
1507 #define GPIO_DIR_PIN17_Input (0UL) /*!< Pin set as input. */
1513 #define GPIO_DIR_PIN16_Input (0UL) /*!< Pin set as input. */
1519 #define GPIO_DIR_PIN15_Input (0UL) /*!< Pin set as input. */
1525 #define GPIO_DIR_PIN14_Input (0UL) /*!< Pin set as input. */
1531 #define GPIO_DIR_PIN13_Input (0UL) /*!< Pin set as input. */
1537 #define GPIO_DIR_PIN12_Input (0UL) /*!< Pin set as input. */
1543 #define GPIO_DIR_PIN11_Input (0UL) /*!< Pin set as input. */
1549 #define GPIO_DIR_PIN10_Input (0UL) /*!< Pin set as input. */
1555 #define GPIO_DIR_PIN9_Input (0UL) /*!< Pin set as input. */
1561 #define GPIO_DIR_PIN8_Input (0UL) /*!< Pin set as input. */
1567 #define GPIO_DIR_PIN7_Input (0UL) /*!< Pin set as input. */
1573 #define GPIO_DIR_PIN6_Input (0UL) /*!< Pin set as input. */
1579 #define GPIO_DIR_PIN5_Input (0UL) /*!< Pin set as input. */
1585 #define GPIO_DIR_PIN4_Input (0UL) /*!< Pin set as input. */
1591 #define GPIO_DIR_PIN3_Input (0UL) /*!< Pin set as input. */
1597 #define GPIO_DIR_PIN2_Input (0UL) /*!< Pin set as input. */
1603 #define GPIO_DIR_PIN1_Input (0UL) /*!< Pin set as input. */
1609 #define GPIO_DIR_PIN0_Input (0UL) /*!< Pin set as input. */
1618 #define GPIO_DIRSET_PIN31_Input (0UL) /*!< Pin set as input. */
1625 #define GPIO_DIRSET_PIN30_Input (0UL) /*!< Pin set as input. */
1632 #define GPIO_DIRSET_PIN29_Input (0UL) /*!< Pin set as input. */
1639 #define GPIO_DIRSET_PIN28_Input (0UL) /*!< Pin set as input. */
1646 #define GPIO_DIRSET_PIN27_Input (0UL) /*!< Pin set as input. */
1653 #define GPIO_DIRSET_PIN26_Input (0UL) /*!< Pin set as input. */
1660 #define GPIO_DIRSET_PIN25_Input (0UL) /*!< Pin set as input. */
1667 #define GPIO_DIRSET_PIN24_Input (0UL) /*!< Pin set as input. */
1674 #define GPIO_DIRSET_PIN23_Input (0UL) /*!< Pin set as input. */
1681 #define GPIO_DIRSET_PIN22_Input (0UL) /*!< Pin set as input. */
1688 #define GPIO_DIRSET_PIN21_Input (0UL) /*!< Pin set as input. */
1695 #define GPIO_DIRSET_PIN20_Input (0UL) /*!< Pin set as input. */
1702 #define GPIO_DIRSET_PIN19_Input (0UL) /*!< Pin set as input. */
1709 #define GPIO_DIRSET_PIN18_Input (0UL) /*!< Pin set as input. */
1716 #define GPIO_DIRSET_PIN17_Input (0UL) /*!< Pin set as input. */
1723 #define GPIO_DIRSET_PIN16_Input (0UL) /*!< Pin set as input. */
1730 #define GPIO_DIRSET_PIN15_Input (0UL) /*!< Pin set as input. */
1737 #define GPIO_DIRSET_PIN14_Input (0UL) /*!< Pin set as input. */
1744 #define GPIO_DIRSET_PIN13_Input (0UL) /*!< Pin set as input. */
1751 #define GPIO_DIRSET_PIN12_Input (0UL) /*!< Pin set as input. */
1758 #define GPIO_DIRSET_PIN11_Input (0UL) /*!< Pin set as input. */
1765 #define GPIO_DIRSET_PIN10_Input (0UL) /*!< Pin set as input. */
1772 #define GPIO_DIRSET_PIN9_Input (0UL) /*!< Pin set as input. */
1779 #define GPIO_DIRSET_PIN8_Input (0UL) /*!< Pin set as input. */
1786 #define GPIO_DIRSET_PIN7_Input (0UL) /*!< Pin set as input. */
1793 #define GPIO_DIRSET_PIN6_Input (0UL) /*!< Pin set as input. */
1800 #define GPIO_DIRSET_PIN5_Input (0UL) /*!< Pin set as input. */
1807 #define GPIO_DIRSET_PIN4_Input (0UL) /*!< Pin set as input. */
1814 #define GPIO_DIRSET_PIN3_Input (0UL) /*!< Pin set as input. */
1821 #define GPIO_DIRSET_PIN2_Input (0UL) /*!< Pin set as input. */
1828 #define GPIO_DIRSET_PIN1_Input (0UL) /*!< Pin set as input. */
1835 #define GPIO_DIRSET_PIN0_Input (0UL) /*!< Pin set as input. */
1842 /* Bit 31 : Set as input pin 31. */
1845 #define GPIO_DIRCLR_PIN31_Input (0UL) /*!< Pin set as input. */
1847 #define GPIO_DIRCLR_PIN31_Clear (1UL) /*!< Set pin as input. */
1849 /* Bit 30 : Set as input pin 30. */
1852 #define GPIO_DIRCLR_PIN30_Input (0UL) /*!< Pin set as input. */
1854 #define GPIO_DIRCLR_PIN30_Clear (1UL) /*!< Set pin as input. */
1856 /* Bit 29 : Set as input pin 29. */
1859 #define GPIO_DIRCLR_PIN29_Input (0UL) /*!< Pin set as input. */
1861 #define GPIO_DIRCLR_PIN29_Clear (1UL) /*!< Set pin as input. */
1863 /* Bit 28 : Set as input pin 28. */
1866 #define GPIO_DIRCLR_PIN28_Input (0UL) /*!< Pin set as input. */
1868 #define GPIO_DIRCLR_PIN28_Clear (1UL) /*!< Set pin as input. */
1870 /* Bit 27 : Set as input pin 27. */
1873 #define GPIO_DIRCLR_PIN27_Input (0UL) /*!< Pin set as input. */
1875 #define GPIO_DIRCLR_PIN27_Clear (1UL) /*!< Set pin as input. */
1877 /* Bit 26 : Set as input pin 26. */
1880 #define GPIO_DIRCLR_PIN26_Input (0UL) /*!< Pin set as input. */
1882 #define GPIO_DIRCLR_PIN26_Clear (1UL) /*!< Set pin as input. */
1884 /* Bit 25 : Set as input pin 25. */
1887 #define GPIO_DIRCLR_PIN25_Input (0UL) /*!< Pin set as input. */
1889 #define GPIO_DIRCLR_PIN25_Clear (1UL) /*!< Set pin as input. */
1891 /* Bit 24 : Set as input pin 24. */
1894 #define GPIO_DIRCLR_PIN24_Input (0UL) /*!< Pin set as input. */
1896 #define GPIO_DIRCLR_PIN24_Clear (1UL) /*!< Set pin as input. */
1898 /* Bit 23 : Set as input pin 23. */
1901 #define GPIO_DIRCLR_PIN23_Input (0UL) /*!< Pin set as input. */
1903 #define GPIO_DIRCLR_PIN23_Clear (1UL) /*!< Set pin as input. */
1905 /* Bit 22 : Set as input pin 22. */
1908 #define GPIO_DIRCLR_PIN22_Input (0UL) /*!< Pin set as input. */
1910 #define GPIO_DIRCLR_PIN22_Clear (1UL) /*!< Set pin as input. */
1912 /* Bit 21 : Set as input pin 21. */
1915 #define GPIO_DIRCLR_PIN21_Input (0UL) /*!< Pin set as input. */
1917 #define GPIO_DIRCLR_PIN21_Clear (1UL) /*!< Set pin as input. */
1919 /* Bit 20 : Set as input pin 20. */
1922 #define GPIO_DIRCLR_PIN20_Input (0UL) /*!< Pin set as input. */
1924 #define GPIO_DIRCLR_PIN20_Clear (1UL) /*!< Set pin as input. */
1926 /* Bit 19 : Set as input pin 19. */
1929 #define GPIO_DIRCLR_PIN19_Input (0UL) /*!< Pin set as input. */
1931 #define GPIO_DIRCLR_PIN19_Clear (1UL) /*!< Set pin as input. */
1933 /* Bit 18 : Set as input pin 18. */
1936 #define GPIO_DIRCLR_PIN18_Input (0UL) /*!< Pin set as input. */
1938 #define GPIO_DIRCLR_PIN18_Clear (1UL) /*!< Set pin as input. */
1940 /* Bit 17 : Set as input pin 17. */
1943 #define GPIO_DIRCLR_PIN17_Input (0UL) /*!< Pin set as input. */
1945 #define GPIO_DIRCLR_PIN17_Clear (1UL) /*!< Set pin as input. */
1947 /* Bit 16 : Set as input pin 16. */
1950 #define GPIO_DIRCLR_PIN16_Input (0UL) /*!< Pin set as input. */
1952 #define GPIO_DIRCLR_PIN16_Clear (1UL) /*!< Set pin as input. */
1954 /* Bit 15 : Set as input pin 15. */
1957 #define GPIO_DIRCLR_PIN15_Input (0UL) /*!< Pin set as input. */
1959 #define GPIO_DIRCLR_PIN15_Clear (1UL) /*!< Set pin as input. */
1961 /* Bit 14 : Set as input pin 14. */
1964 #define GPIO_DIRCLR_PIN14_Input (0UL) /*!< Pin set as input. */
1966 #define GPIO_DIRCLR_PIN14_Clear (1UL) /*!< Set pin as input. */
1968 /* Bit 13 : Set as input pin 13. */
1971 #define GPIO_DIRCLR_PIN13_Input (0UL) /*!< Pin set as input. */
1973 #define GPIO_DIRCLR_PIN13_Clear (1UL) /*!< Set pin as input. */
1975 /* Bit 12 : Set as input pin 12. */
1978 #define GPIO_DIRCLR_PIN12_Input (0UL) /*!< Pin set as input. */
1980 #define GPIO_DIRCLR_PIN12_Clear (1UL) /*!< Set pin as input. */
1982 /* Bit 11 : Set as input pin 11. */
1985 #define GPIO_DIRCLR_PIN11_Input (0UL) /*!< Pin set as input. */
1987 #define GPIO_DIRCLR_PIN11_Clear (1UL) /*!< Set pin as input. */
1989 /* Bit 10 : Set as input pin 10. */
1992 #define GPIO_DIRCLR_PIN10_Input (0UL) /*!< Pin set as input. */
1994 #define GPIO_DIRCLR_PIN10_Clear (1UL) /*!< Set pin as input. */
1996 /* Bit 9 : Set as input pin 9. */
1999 #define GPIO_DIRCLR_PIN9_Input (0UL) /*!< Pin set as input. */
2001 #define GPIO_DIRCLR_PIN9_Clear (1UL) /*!< Set pin as input. */
2003 /* Bit 8 : Set as input pin 8. */
2006 #define GPIO_DIRCLR_PIN8_Input (0UL) /*!< Pin set as input. */
2008 #define GPIO_DIRCLR_PIN8_Clear (1UL) /*!< Set pin as input. */
2010 /* Bit 7 : Set as input pin 7. */
2013 #define GPIO_DIRCLR_PIN7_Input (0UL) /*!< Pin set as input. */
2015 #define GPIO_DIRCLR_PIN7_Clear (1UL) /*!< Set pin as input. */
2017 /* Bit 6 : Set as input pin 6. */
2020 #define GPIO_DIRCLR_PIN6_Input (0UL) /*!< Pin set as input. */
2022 #define GPIO_DIRCLR_PIN6_Clear (1UL) /*!< Set pin as input. */
2024 /* Bit 5 : Set as input pin 5. */
2027 #define GPIO_DIRCLR_PIN5_Input (0UL) /*!< Pin set as input. */
2029 #define GPIO_DIRCLR_PIN5_Clear (1UL) /*!< Set pin as input. */
2031 /* Bit 4 : Set as input pin 4. */
2034 #define GPIO_DIRCLR_PIN4_Input (0UL) /*!< Pin set as input. */
2036 #define GPIO_DIRCLR_PIN4_Clear (1UL) /*!< Set pin as input. */
2038 /* Bit 3 : Set as input pin 3. */
2041 #define GPIO_DIRCLR_PIN3_Input (0UL) /*!< Pin set as input. */
2043 #define GPIO_DIRCLR_PIN3_Clear (1UL) /*!< Set pin as input. */
2045 /* Bit 2 : Set as input pin 2. */
2048 #define GPIO_DIRCLR_PIN2_Input (0UL) /*!< Pin set as input. */
2050 #define GPIO_DIRCLR_PIN2_Clear (1UL) /*!< Set pin as input. */
2052 /* Bit 1 : Set as input pin 1. */
2055 #define GPIO_DIRCLR_PIN1_Input (0UL) /*!< Pin set as input. */
2057 #define GPIO_DIRCLR_PIN1_Clear (1UL) /*!< Set pin as input. */
2059 /* Bit 0 : Set as input pin 0. */
2062 #define GPIO_DIRCLR_PIN0_Input (0UL) /*!< Pin set as input. */
2064 #define GPIO_DIRCLR_PIN0_Clear (1UL) /*!< Set pin as input. */
2095 /* Bit 1 : Connect or disconnect input path. */
2096 #define GPIO_PIN_CNF_INPUT_Pos (1UL) /*!< Position of INPUT field. */
2097 #define GPIO_PIN_CNF_INPUT_Msk (0x1UL << GPIO_PIN_CNF_INPUT_Pos) /*!< Bit mask of INPUT field. */
2098 #define GPIO_PIN_CNF_INPUT_Connect (0UL) /*!< Connect input pin. */
2099 #define GPIO_PIN_CNF_INPUT_Disconnect (1UL) /*!< Disconnect input pin. */
2104 #define GPIO_PIN_CNF_DIR_Input (0UL) /*!< Configure pin as an input pin. */
2196 /* Bits 17..16 : Effects on output when in Task mode, or events on input that generates an event. */
2329 #define LPCOMP_RESULT_RESULT_Below (0UL) /*!< Input voltage is bellow the reference threshold. */
2330 #define LPCOMP_RESULT_RESULT_Above (1UL) /*!< Input voltage is above the reference threshold. */
2342 /* Description: Input pin select. */
2344 /* Bits 2..0 : Analog input pin select. */
2347 #define LPCOMP_PSEL_PSEL_AnalogInput0 (0UL) /*!< Use analog input 0 as analog input. */
2348 #define LPCOMP_PSEL_PSEL_AnalogInput1 (1UL) /*!< Use analog input 1 as analog input. */
2349 #define LPCOMP_PSEL_PSEL_AnalogInput2 (2UL) /*!< Use analog input 2 as analog input. */
2350 #define LPCOMP_PSEL_PSEL_AnalogInput3 (3UL) /*!< Use analog input 3 as analog input. */
2351 #define LPCOMP_PSEL_PSEL_AnalogInput4 (4UL) /*!< Use analog input 4 as analog input. */
2352 #define LPCOMP_PSEL_PSEL_AnalogInput5 (5UL) /*!< Use analog input 5 as analog input. */
2353 #define LPCOMP_PSEL_PSEL_AnalogInput6 (6UL) /*!< Use analog input 6 as analog input. */
2354 #define LPCOMP_PSEL_PSEL_AnalogInput7 (7UL) /*!< Use analog input 7 as analog input. */
4126 /* Description: Enable debouncer input filters. */
4128 /* Bit 0 : Enable debounce input filters. */
4131 #define QDEC_DBFEN_DBFEN_Disabled (0UL) /*!< Debounce input filters disabled. */
4132 #define QDEC_DBFEN_DBFEN_Enabled (1UL) /*!< Debounce input filters enabled. */
5827 /* Bit 3 : The serial data input is '0' for longer than the length of a data frame. */
5834 /* Bit 2 : A valid stop bit is not detected on the serial data input after all bits in a character …