Lines Matching full:authentication
186 * preshared key authentication in station mode. In %NL80211_CMD_CONNECT
194 * handshakes during 802.1X authentication in station mode. In order to
202 * preshared key authentication in AP mode. In %NL80211_CMD_START_AP
214 * DOC: FILS shared key authentication offload
216 * FILS shared key authentication offload can be advertised by drivers by
218 * FILS shared key authentication offload should be able to construct the
219 * authentication and association frames for FILS shared key authentication and
227 * rIK should be used to generate an authentication tag on the ERP message and
232 * When FILS shared key authentication is completed, driver needs to provide the
252 * DOC: SAE authentication offload
255 * support offloading SAE authentication for WPA3-Personal networks in station
311 * association frames for FILS shared key authentication as per IEEE 802.11ai.
561 * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
567 * authentication. Additionally in case of SAE offload and OWE offloads
598 * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
601 * authentication process.
605 * the SSID (mainly for association, but is included in authentication
609 * authentication type. %NL80211_ATTR_IE is used to define IEs
612 * When used as an event, this reports reception of an Authentication
619 * also used to indicate if the authentication attempt timed out. In that
622 * pending authentication timed out).
703 * authentication/association or not receiving a response from the AP.
861 * reoccurring, the userspace authentication daemon may want to create the
863 * depending on the authentication result.
1164 * drivers that do not define separate commands for authentication and
1165 * association, but rely on user space for the authentication to happen.
1167 * to trigger the authentication and command response (userspace to
1168 * driver) to indicate the authentication status.
1172 * this interface to offload only the authentication part to the user
1173 * space. Authentication frames are passed between the driver and user
1175 * further with the association after getting successful authentication
1176 * status. User space indicates the authentication status through
1182 * during the authentication offload in STA mode while connecting to MLD
1185 * MLO during the authentication offload or not.
1186 * User space should enable MLO during the authentication only when it
1187 * receives the AP MLD address in authentication offload request. User
1188 * space shouldn't enable MLO when the authentication offload request
1195 * authentication.
1197 * Host driver reports this status on an authentication failure to the
1963 * is requesting a local authentication/association state change without
2206 * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames.
2207 * This contains the authentication frame body (non-IE and IE data),
2208 * excluding the Authentication algorithm number, i.e., starting at the
2209 * Authentication transaction sequence number field. It is used with
2210 * authentication algorithms that need special fields to be added into
2212 * initial two fields (Authentication transaction sequence number and
2214 * for all authentication algorithms to keep the attribute definition
2557 * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP)
2561 * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part
2567 * for FILS authentication and is used with %NL80211_CMD_CONNECT.
2569 * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the
2572 * from successful FILS authentication and is used with
2583 * authentication it is used with %NL80211_CMD_SET_PMK. For offloaded FT
2593 * in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it
2599 * authentication operation (u32 attribute with an
2603 * space supports external authentication. This attribute shall be used
2605 * may offload authentication processing to user space if this capability
2658 * SAE authentication for WPA3-Personal networks.
2697 * authentication. This timeout helps authentication methods like SAE,
2699 * authentication instead of getting updated during an association for EAP
2700 * authentication. No new full authentication within the PMK expiry shall
2707 * driver to trigger a full authentication roam (without PMKSA caching)
2711 * Authentication methods like SAE need to be able to generate a new PMKSA
2744 * derivation in WPA3-Personal networks which are using SAE authentication.
3935 * authentication server (u8, 0 or 1)
4900 * will advertise that it is connected to a authentication server
4965 * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
4968 * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
4985 * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication
4987 * Default is no authentication method required.
5279 * keeps track of whether or not authentication was done with
5296 * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
5297 * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
5300 * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
6112 * plink are discarded, except for authentication frames
6217 * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
6273 * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
6292 * they should be added before even sending the authentication reply
6433 * authentication with %NL80211_CMD_CONNECT.
6495 * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
6538 * @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication
6582 * authentication, data encryption and message integrity.
6585 * in authentication and deauthentication frames sent to unassociated peer
6722 * @NL80211_TIMEOUT_AUTH: Authentication timed out.
6948 * the authentication. Exclusively defined for host drivers that
6950 * to handle certain authentication algorithms (e.g. SAE).
7235 * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
7236 * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
7237 * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
7873 * derivation. Applicable only when WPA3-Personal SAE authentication is
8046 * authentication.