54 	{ USB_DEVICE(0x0404, 0x034C) },	/* NCR Retail IO Box */
55 	{ USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */
56 	{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
57 	{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
58 	{ USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
59 	{ USB_DEVICE(0x04BF, 0x1301) }, /* TDK Corporation NC0110013M - Network Controller */
60 	{ USB_DEVICE(0x04BF, 0x1303) }, /* TDK Corporation MM0110113M - i3 Micro Module */
61 	{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
62 …{ USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series…
63 	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
64 	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
65 	{ USB_DEVICE(0x0908, 0x0070) }, /* Siemens SCALANCE LPE-9000 USB Serial Console */
66 	{ USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
67 	{ USB_DEVICE(0x0988, 0x0578) }, /* Teraoka AD2000 */
68 	{ USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */
69 	{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
70 	{ USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
71 	{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
72 	{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
73 	{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
74 	{ USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */
75 	{ USB_DEVICE(0x106F, 0x0003) },	/* CPI / Money Controls Bulk Coin Recycler */
76 	{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
77 	{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
78 	{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
79 	{ USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
80 	{ USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
81 	{ USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
82 	{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
83 	{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
84 	{ USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */
85 	{ USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
86 	{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
87 	{ USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
88 	{ USB_DEVICE(0x10C4, 0x8056) }, /* Lorenz Messtechnik devices */
89 	{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
90 	{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
91 	{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
92 	{ USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
93 	{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
94 	{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
95 	{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
96 	{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
97 	{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
98 	{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
99 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
100 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
101 	{ USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
102 	{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
103 	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
104 	{ USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
105 	{ USB_DEVICE(0x10C4, 0x817C) }, /* CESINEL MEDCAL N Power Quality Monitor */
106 	{ USB_DEVICE(0x10C4, 0x817D) }, /* CESINEL MEDCAL NT Power Quality Monitor */
107 	{ USB_DEVICE(0x10C4, 0x817E) }, /* CESINEL MEDCAL S Power Quality Monitor */
108 	{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
109 	{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
110 	{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
111 	{ USB_DEVICE(0x10C4, 0x81A9) }, /* Multiplex RC Interface */
112 	{ USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
113 	{ USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
114 	{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
115 	{ USB_DEVICE(0x10C4, 0x81D7) }, /* IAI Corp. RCB-CV-USB USB to RS485 Adaptor */
116 	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
117 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
118 	{ USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
119 	{ USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
120 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
121 	{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
122 …{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration mo…
123 	{ USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
124 	{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
125 	{ USB_DEVICE(0x10C4, 0x82AA) }, /* Silicon Labs IFS-USB-DATACABLE used with Quint UPS */
126 	{ USB_DEVICE(0x10C4, 0x82EF) }, /* CESINEL FALCO 6105 AC Power Supply */
127 	{ USB_DEVICE(0x10C4, 0x82F1) }, /* CESINEL MEDCAL EFD Earth Fault Detector */
128 	{ USB_DEVICE(0x10C4, 0x82F2) }, /* CESINEL MEDCAL ST Network Analyzer */
129 	{ USB_DEVICE(0x10C4, 0x82F4) }, /* Starizona MicroTouch */
130 	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
131 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
132 	{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
133 	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
134 	{ USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */
135 	{ USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
136 	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
137 	{ USB_DEVICE(0x10C4, 0x8414) }, /* Decagon USB Cable Adapter */
138 	{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
139 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
140 	{ USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */
141 	{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
142 	{ USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */
143 	{ USB_DEVICE(0x10C4, 0x851E) }, /* CESINEL MEDCAL PT Network Analyzer */
144 	{ USB_DEVICE(0x10C4, 0x85A7) }, /* LifeScan OneTouch Verio IQ */
145 	{ USB_DEVICE(0x10C4, 0x85B8) }, /* CESINEL ReCon T Energy Logger */
146 	{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
147 	{ USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
148 	{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
149 	{ USB_DEVICE(0x10C4, 0x863C) }, /* MGP Instruments PDS100 */
150 	{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
151 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
152 	{ USB_DEVICE(0x10C4, 0x87ED) }, /* IMST USB-Stick for Smart Meter */
153 	{ USB_DEVICE(0x10C4, 0x8856) },	/* CEL EM357 ZigBee USB Stick - LR */
154 	{ USB_DEVICE(0x10C4, 0x8857) },	/* CEL EM357 ZigBee USB Stick */
155 	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
156 	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
157 	{ USB_DEVICE(0x10C4, 0x88D8) }, /* Acuity Brands nLight Air Adapter */
158 	{ USB_DEVICE(0x10C4, 0x88FB) }, /* CESINEL MEDCAL STII Network Analyzer */
159 	{ USB_DEVICE(0x10C4, 0x8938) }, /* CESINEL MEDCAL S II Network Analyzer */
160 	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
161 	{ USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */
162 	{ USB_DEVICE(0x10C4, 0x8977) },	/* CEL MeshWorks DevKit Device */
163 	{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
164 	{ USB_DEVICE(0x10C4, 0x89A4) }, /* CESINEL FTBC Flexible Thyristor Bridge Controller */
165 	{ USB_DEVICE(0x10C4, 0x89FB) }, /* Qivicon ZigBee USB Radio Stick */
166 	{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
167 	{ USB_DEVICE(0x10C4, 0x8A5B) }, /* CEL EM3588 ZigBee USB Stick */
168 	{ USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */
169 	{ USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */
170 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
171 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
172 	{ USB_DEVICE(0x10C4, 0xEA63) }, /* Silicon Labs Windows Update (CP2101-4/CP2102N) */
173 	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
174 	{ USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
175 	{ USB_DEVICE(0x10C4, 0xEA7A) }, /* Silicon Labs Windows Update (CP2105) */
176 	{ USB_DEVICE(0x10C4, 0xEA7B) }, /* Silicon Labs Windows Update (CP2108) */
177 	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
178 	{ USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
179 	{ USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
180 	{ USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
181 	{ USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
182 	{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
183 	{ USB_DEVICE(0x11CA, 0x0212) }, /* Verifone USB to Printer (UART, CP2102) */
184 	{ USB_DEVICE(0x12B8, 0xEC60) }, /* Link G4 ECU */
185 	{ USB_DEVICE(0x12B8, 0xEC62) }, /* Link G4+ ECU */
186 	{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
187 	{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
188 	{ USB_DEVICE(0x155A, 0x1006) },	/* ELDAT Easywave RX09 */
189 	{ USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
190 	{ USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
191 	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
192 	{ USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
193 	{ USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
194 	{ USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
195 	{ USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
196 	{ USB_DEVICE(0x16C0, 0x09B0) }, /* Lunatico Seletek */
197 	{ USB_DEVICE(0x16C0, 0x09B1) }, /* Lunatico Seletek */
198 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
199 	{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
200 …{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Powe…
201 	{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
202 …{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Lo…
203 	{ USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
204 	{ USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
205 	{ USB_DEVICE(0x17A8, 0x0011) }, /* Kamstrup 444 MHz RF sniffer */
206 	{ USB_DEVICE(0x17A8, 0x0013) }, /* Kamstrup 870 MHz RF sniffer */
207 	{ USB_DEVICE(0x17A8, 0x0101) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Int Ant) */
208 	{ USB_DEVICE(0x17A8, 0x0102) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Ext Ant) */
209 	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
210 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
211 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
212 	{ USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
213 	{ USB_DEVICE(0x18EF, 0xE030) }, /* ELV ALC 8xxx Battery Charger */
214 	{ USB_DEVICE(0x18EF, 0xE032) }, /* ELV TFD500 Data Logger */
215 	{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
216 	{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
217 	{ USB_DEVICE(0x1901, 0x0194) },	/* GE Healthcare Remote Alarm Box */
218 	{ USB_DEVICE(0x1901, 0x0195) },	/* GE B850/B650/B450 CP2104 DP UART interface */
219 	{ USB_DEVICE(0x1901, 0x0196) },	/* GE B850 CP2105 DP UART interface */
220 	{ USB_DEVICE(0x1901, 0x0197) }, /* GE CS1000 M.2 Key E serial interface */
221 	{ USB_DEVICE(0x1901, 0x0198) }, /* GE CS1000 Display serial interface */
222 	{ USB_DEVICE(0x199B, 0xBA30) }, /* LORD WSDA-200-USB */
223 	{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
224 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
225 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
226 	{ USB_DEVICE(0x1B93, 0x1013) }, /* Phoenix Contact UPS Device */
227 	{ USB_DEVICE(0x1BA4, 0x0002) },	/* Silicon Labs 358x factory default */
228 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
229 	{ USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
230 	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
231 	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
232 	{ USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
233 	{ USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
234 	{ USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
235 	{ USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
236 	{ USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
237 	{ USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
238 	{ USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
239 	{ USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
240 	{ USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
241 	{ USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
242 	{ USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
243 	{ USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
244 	{ USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
245 	{ USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
246 	{ USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
247 	{ USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
248 	{ USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
249 	{ USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
250 	{ USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
251 	{ USB_DEVICE(0x2184, 0x0030) }, /* GW Instek GDM-834x Digital Multimeter */
252 	{ USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */
253 	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
254 	{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
255 	{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
256 	{ USB_DEVICE(0x3923, 0x7A0B) }, /* National Instruments USB Serial Console */
257 	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
333 #define REQTYPE_HOST_TO_INTERFACE	0x41
334 #define REQTYPE_INTERFACE_TO_HOST	0xc1
335 #define REQTYPE_HOST_TO_DEVICE	0x40
336 #define REQTYPE_DEVICE_TO_HOST	0xc0
339 #define CP210X_IFC_ENABLE	0x00
340 #define CP210X_SET_BAUDDIV	0x01
341 #define CP210X_GET_BAUDDIV	0x02
342 #define CP210X_SET_LINE_CTL	0x03
343 #define CP210X_GET_LINE_CTL	0x04
344 #define CP210X_SET_BREAK	0x05
345 #define CP210X_IMM_CHAR		0x06
346 #define CP210X_SET_MHS		0x07
347 #define CP210X_GET_MDMSTS	0x08
348 #define CP210X_SET_XON		0x09
349 #define CP210X_SET_XOFF		0x0A
350 #define CP210X_SET_EVENTMASK	0x0B
351 #define CP210X_GET_EVENTMASK	0x0C
352 #define CP210X_SET_CHAR		0x0D
353 #define CP210X_GET_CHARS	0x0E
354 #define CP210X_GET_PROPS	0x0F
355 #define CP210X_GET_COMM_STATUS	0x10
356 #define CP210X_RESET		0x11
357 #define CP210X_PURGE		0x12
358 #define CP210X_SET_FLOW		0x13
359 #define CP210X_GET_FLOW		0x14
360 #define CP210X_EMBED_EVENTS	0x15
361 #define CP210X_GET_EVENTSTATE	0x16
362 #define CP210X_SET_CHARS	0x19
363 #define CP210X_GET_BAUDRATE	0x1D
364 #define CP210X_SET_BAUDRATE	0x1E
365 #define CP210X_VENDOR_SPECIFIC	0xFF
368 #define UART_ENABLE		0x0001
369 #define UART_DISABLE		0x0000
372 #define BAUD_RATE_GEN_FREQ	0x384000
375 #define BITS_DATA_MASK		0X0f00
376 #define BITS_DATA_5		0X0500
377 #define BITS_DATA_6		0X0600
378 #define BITS_DATA_7		0X0700
379 #define BITS_DATA_8		0X0800
380 #define BITS_DATA_9		0X0900
382 #define BITS_PARITY_MASK	0x00f0
383 #define BITS_PARITY_NONE	0x0000
384 #define BITS_PARITY_ODD		0x0010
385 #define BITS_PARITY_EVEN	0x0020
386 #define BITS_PARITY_MARK	0x0030
387 #define BITS_PARITY_SPACE	0x0040
389 #define BITS_STOP_MASK		0x000f
390 #define BITS_STOP_1		0x0000
391 #define BITS_STOP_1_5		0x0001
392 #define BITS_STOP_2		0x0002
395 #define BREAK_ON		0x0001
396 #define BREAK_OFF		0x0000
399 #define CONTROL_DTR		0x0001
400 #define CONTROL_RTS		0x0002
401 #define CONTROL_CTS		0x0010
402 #define CONTROL_DSR		0x0020
403 #define CONTROL_RING		0x0040
404 #define CONTROL_DCD		0x0080
405 #define CONTROL_WRITE_DTR	0x0100
406 #define CONTROL_WRITE_RTS	0x0200
419 #define CP210X_GET_FW_VER	0x000E
420 #define CP210X_READ_2NCONFIG	0x000E
421 #define CP210X_GET_FW_VER_2N	0x0010
422 #define CP210X_READ_LATCH	0x00C2
423 #define CP210X_GET_PARTNUM	0x370B
424 #define CP210X_GET_PORTCONFIG	0x370C
425 #define CP210X_GET_DEVICEMODE	0x3711
426 #define CP210X_WRITE_LATCH	0x37E1
429 #define CP210X_PARTNUM_CP2101	0x01
430 #define CP210X_PARTNUM_CP2102	0x02
431 #define CP210X_PARTNUM_CP2103	0x03
432 #define CP210X_PARTNUM_CP2104	0x04
433 #define CP210X_PARTNUM_CP2105	0x05
434 #define CP210X_PARTNUM_CP2108	0x08
435 #define CP210X_PARTNUM_CP2102N_QFN28	0x20
436 #define CP210X_PARTNUM_CP2102N_QFN24	0x21
437 #define CP210X_PARTNUM_CP2102N_QFN20	0x22
438 #define CP210X_PARTNUM_UNKNOWN	0xFF
440 /* CP210X_GET_COMM_STATUS returns these 0x13 bytes */
454  * bit 0 or bit 2 clears the transmit queue and 1 or 3 receive.
457 #define PURGE_ALL		0x000f
460 #define CP210X_ESCCHAR		0xec
468 /* CP210X_GET_FLOW/CP210X_SET_FLOW read/write these 0x10 bytes */
477 #define CP210X_SERIAL_DTR_MASK		GENMASK(1, 0)
478 #define CP210X_SERIAL_DTR_INACTIVE	(0 << 0)
479 #define CP210X_SERIAL_DTR_ACTIVE	(1 << 0)
480 #define CP210X_SERIAL_DTR_FLOW_CTL	(2 << 0)
487 #define CP210X_SERIAL_AUTO_TRANSMIT	BIT(0)
493 #define CP210X_SERIAL_RTS_INACTIVE	(0 << 6)
498 /* CP210X_VENDOR_SPECIFIC, CP210X_GET_DEVICEMODE call reads these 0x2 bytes. */
504 #define CP210X_PIN_MODE_MODEM		0
505 #define CP210X_PIN_MODE_GPIO		BIT(0)
508  * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xf bytes
523  * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xd bytes
546 #define CP2105_GPIO0_TXLED_MODE		BIT(0)
551 #define CP2104_GPIO0_TXLED_MODE		BIT(0)
576  * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0x49 bytes
590 #define CP2108_EF_IFC_GPIO_TXLED		0x01
591 #define CP2108_EF_IFC_GPIO_RXLED		0x02
592 #define CP2108_EF_IFC_GPIO_RS485		0x04
593 #define CP2108_EF_IFC_GPIO_RS485_LOGIC		0x08
594 #define CP2108_EF_IFC_GPIO_CLOCK		0x10
595 #define CP2108_EF_IFC_DYNAMIC_SUSPEND		0x40
610  * CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x02 bytes
619  * CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x04 bytes
651 	result = usb_control_msg_recv(serial->dev, 0, req,  in cp210x_read_reg_block()
652 			REQTYPE_INTERFACE_TO_HOST, 0,  in cp210x_read_reg_block()
656 		dev_err(&port->dev, "failed get req 0x%x size %d status: %d\n",  in cp210x_read_reg_block()
661 	return 0;  in cp210x_read_reg_block()
681 	result = usb_control_msg_recv(serial->dev, 0, CP210X_VENDOR_SPECIFIC,  in cp210x_read_vendor_block()
686 			"failed to get vendor val 0x%04x size %d: %d\n", val,  in cp210x_read_vendor_block()
691 	return 0;  in cp210x_read_vendor_block()
704 	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),  in cp210x_write_u16_reg()
706 			port_priv->bInterfaceNumber, NULL, 0,  in cp210x_write_u16_reg()
708 	if (result < 0) {  in cp210x_write_u16_reg()
709 		dev_err(&port->dev, "failed set request 0x%x status: %d\n",  in cp210x_write_u16_reg()
727 	result = usb_control_msg_send(serial->dev, 0, req,  in cp210x_write_reg_block()
728 			REQTYPE_HOST_TO_INTERFACE, 0,  in cp210x_write_reg_block()
732 		dev_err(&port->dev, "failed set req 0x%x size %d status: %d\n",  in cp210x_write_reg_block()
737 	return 0;  in cp210x_write_reg_block()
762 	result = usb_control_msg_send(serial->dev, 0, CP210X_VENDOR_SPECIFIC,  in cp210x_write_vendor_block()
767 			"failed to set vendor val 0x%04x size %d: %d\n", val,  in cp210x_write_vendor_block()
772 	return 0;  in cp210x_write_vendor_block()
794 	return 0;  in cp210x_open()
833 		tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);  in cp210x_process_lsr()
850 		case 0:  in cp210x_process_char()
865 			dev_err(&port->dev, "malformed event 0x%02x\n", *ch);  in cp210x_process_char()
875 		dev_dbg(&port->dev, "%s - lsr = 0x%02x, data = 0x%02x\n",  in cp210x_process_char()
881 		dev_dbg(&port->dev, "%s - lsr = 0x%02x\n", __func__, *ch);  in cp210x_process_char()
887 		dev_dbg(&port->dev, "%s - msr = 0x%02x\n", __func__, *ch);  in cp210x_process_char()
908 		for (i = 0; i < urb->actual_length; i++, ch++) {  in cp210x_process_read_urb()
933 	result = usb_control_msg_recv(serial->dev, 0, CP210X_GET_COMM_STATUS,  in cp210x_get_tx_queue_byte_count()
934 			REQTYPE_INTERFACE_TO_HOST, 0,  in cp210x_get_tx_queue_byte_count()
944 	return 0;  in cp210x_get_tx_queue_byte_count()
1003 	for (i = 0; i < ARRAY_SIZE(cp210x_an205_table1); ++i) {  in cp210x_get_an205_rate()
1059 	if (tty->termios.c_ospeed == 0)  in cp210x_change_speed()
1115 	ret = cp210x_write_u16_reg(port, CP210X_EMBED_EVENTS, 0);  in cp210x_disable_event_mode()
1157 	if (tty->termios.c_ospeed != 0 &&  in cp210x_set_flow_control()
1158 			old_termios && old_termios->c_ospeed != 0 &&  in cp210x_set_flow_control()
1168 		memset(&chars, 0, sizeof(chars));  in cp210x_set_flow_control()
1183 	if (tty->termios.c_ospeed == 0) {  in cp210x_set_flow_control()
1186 	} else if (old_termios && old_termios->c_ospeed == 0) {  in cp210x_set_flow_control()
1239 	dev_dbg(&port->dev, "%s - ctrl = 0x%02x, flow = 0x%02x\n", __func__,  in cp210x_set_flow_control()
1264 			tty->termios.c_ospeed != 0)  in cp210x_set_termios()
1276 	bits = 0;  in cp210x_set_termios()
1342 	u16 control = 0;  in cp210x_tiocmset_port()
1396 		dev_dbg(&port->dev, "%s - ctrl = 0x%02x, flow = 0x%02x\n",  in cp210x_tiocmset_port()
1402 		dev_dbg(&port->dev, "%s - control = 0x%04x\n", __func__, control);  in cp210x_tiocmset_port()
1415 		cp210x_tiocmset_port(port, TIOCM_DTR | TIOCM_RTS, 0);  in cp210x_dtr_rts()
1417 		cp210x_tiocmset_port(port, 0, TIOCM_DTR | TIOCM_RTS);  in cp210x_dtr_rts()
1430 	result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)  in cp210x_tiocmget()
1431 		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)  in cp210x_tiocmget()
1432 		|((control & CONTROL_CTS) ? TIOCM_CTS : 0)  in cp210x_tiocmget()
1433 		|((control & CONTROL_DSR) ? TIOCM_DSR : 0)  in cp210x_tiocmget()
1434 		|((control & CONTROL_RING)? TIOCM_RI  : 0)  in cp210x_tiocmget()
1435 		|((control & CONTROL_DCD) ? TIOCM_CD  : 0);  in cp210x_tiocmget()
1437 	dev_dbg(&port->dev, "%s - control = 0x%02x\n", __func__, control);  in cp210x_tiocmget()
1453 	if (break_state == 0)  in cp210x_break_ctl()
1493 	mask = 0;  in cp210x_gpio_get()
1499 	if (result < 0)  in cp210x_gpio_get()
1520 		state = 0;  in cp210x_gpio_set()
1548 					 usb_sndctrlpipe(serial->dev, 0),  in cp210x_gpio_set()
1553 					 NULL, 0, USB_CTRL_SET_TIMEOUT);  in cp210x_gpio_set()
1559 	if (result < 0) {  in cp210x_gpio_set()
1592 	return 0;  in cp210x_gpio_direction_input()
1604 	return 0;  in cp210x_gpio_direction_output()
1617 		return 0;  in cp210x_gpio_set_config()
1621 		return 0;  in cp210x_gpio_set_config()
1641 	return 0;  in cp210x_gpio_init_valid_mask()
1663 	if (result < 0)  in cp2105_gpioconf_init()
1669 	if (result < 0)  in cp2105_gpioconf_init()
1673 	if (intf_num == 0) {  in cp2105_gpioconf_init()
1678 			priv->gpio_altfunc = 0xff;  in cp2105_gpioconf_init()
1679 			return 0;  in cp2105_gpioconf_init()
1691 			priv->gpio_altfunc = 0xff;  in cp2105_gpioconf_init()
1692 			return 0;  in cp2105_gpioconf_init()
1704 	if (iface_config & CP2105_GPIO0_TXLED_MODE)	/* GPIO 0 */  in cp2105_gpioconf_init()
1705 		priv->gpio_altfunc |= BIT(0);  in cp2105_gpioconf_init()
1711 	priv->gpio_input = 0;  in cp2105_gpioconf_init()
1713 	return 0;  in cp2105_gpioconf_init()
1728 	if (result < 0)  in cp2104_gpioconf_init()
1742 	if (iface_config & CP2104_GPIO0_TXLED_MODE)	/* GPIO 0 */  in cp2104_gpioconf_init()
1743 		priv->gpio_altfunc |= BIT(0);  in cp2104_gpioconf_init()
1754 	for (i = 0; i < priv->gc.ngpio; ++i) {  in cp2104_gpioconf_init()
1763 	return 0;  in cp2104_gpioconf_init()
1777 	if (result < 0)  in cp2108_gpio_init()
1790 	 * Alternate functions of GPIO0 to GPIO3 are determine by enhancedfxn_ifc[0]  in cp2108_gpio_init()
1794 	for (i = 0; i < 4; i++) {  in cp2108_gpio_init()
1809 	for (i = 0; i < priv->gc.ngpio; ++i) {  in cp2108_gpio_init()
1818 	return 0;  in cp2108_gpio_init()
1824 	const u16 config_size = 0x02a6;  in cp2102n_gpioconf_init()
1850 	if (result < 0) {  in cp2102n_gpioconf_init()
1863 	if (config_version != 0x01)  in cp2102n_gpioconf_init()
1872 	gpio_latch = (gpio_rst_latch >> 3) & 0x0f;  in cp2102n_gpioconf_init()
1874 	/* 0 indicates open-drain mode, 1 is push-pull */  in cp2102n_gpioconf_init()
1875 	priv->gpio_pushpull = (gpio_pushpull >> 3) & 0x0f;  in cp2102n_gpioconf_init()
1877 	/* 0 indicates GPIO mode, 1 is alternate function */  in cp2102n_gpioconf_init()
1880 		if (gpio_ctrl & CP2102N_QFN20_GPIO0_CLK_MODE)   /* GPIO 0 */  in cp2102n_gpioconf_init()
1881 			priv->gpio_altfunc |= BIT(0);  in cp2102n_gpioconf_init()
1889 		priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f;  in cp2102n_gpioconf_init()
1913 	for (i = 0; i < priv->gc.ngpio; ++i) {  in cp2102n_gpioconf_init()
1922 	return 0;  in cp2102n_gpioconf_init()
1940 		 * once for interface 0.  in cp210x_gpio_init()
1942 		if (cp210x_interface_num(serial) != 0)  in cp210x_gpio_init()
1943 			return 0;  in cp210x_gpio_init()
1952 		return 0;  in cp210x_gpio_init()
1955 	if (result < 0)  in cp210x_gpio_init()
1992 	return 0;  in cp210x_gpio_init()
2016 	return 0;  in cp210x_port_probe()
2050 		if (cp210x_interface_num(serial) == 0) {  in cp210x_init_max_speed()
2089 	ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),  in cp2102_determine_quirks()
2091 			CP210X_GET_PARTNUM, 0, buf, 2, USB_CTRL_GET_TIMEOUT);  in cp2102_determine_quirks()
2113 			ver[0], ver[1], ver[2]);  in cp210x_get_fw_version()
2115 	priv->fw_version = ver[0] << 16 | ver[1] << 8 | ver[2];  in cp210x_get_fw_version()
2117 	return 0;  in cp210x_get_fw_version()
2128 	if (ret < 0) {  in cp210x_determine_type()
2135 	dev_dbg(&serial->interface->dev, "partnum = 0x%02x\n", priv->partnum);  in cp210x_determine_type()
2151 		if (priv->fw_version <= 0x10004)  in cp210x_determine_type()
2174 	if (result < 0) {  in cp210x_attach()
2179 	return 0;  in cp210x_attach()