Lines Matching +full:line +full:- +full:based
1 # SPDX-License-Identifier: GPL-2.0
19 comment "Non-8250 serial port support"
43 you can alter that using a kernel command line option such as
71 you can alter that using a kernel command line option such as
85 This is enabled with "earlycon=smh" on the kernel command line.
89 bool "Early console using RISC-V SBI"
95 Support for early debug console using RISC-V SBI. This enables
97 with "earlycon=sbi" on the kernel command line. The console is
101 tristate "BCM1xxx on-chip DUART serial support"
107 the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
113 the module will be called sb1250-duart.
129 bool "AT91 on-chip serial port support"
136 This enables the driver for the on-chip UARTs of the Atmel
145 Say Y here if you wish to use an on-chip UART on a Atmel
206 This enables the driver for the on-chip UARTs of the Amlogic
226 This enables the driver for the on-chip UARTs of the Cirrus
236 you can alter that using a kernel command line option such as
244 Support for the on-chip UARTs on the Samsung
265 Allow selection of the S3C24XX on-board serial ports for use as
270 you can alter that using a kernel command line option such as
280 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
292 Support for the mailbox-based TCU (Tegra Combined UART) serial port.
329 that can be controlled through I2C or high-speed SPI.
339 DZ11-family serial controllers for DECstations and VAXstations,
393 If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
407 you can alter that using a kernel command line option such as
419 If you have a machine based on an Intel XScale PXA2xx CPU you
440 you can alter that using a kernel command line option such as
454 If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
469 you can alter that using a kernel command line option such as
481 If you have a machine based on a Motorola IMX CPU you
494 you can alter that using a kernel command line option such as
747 the pmac_zilog and 8250 drivers to co-exist, but may cause
749 access the built-in serial ports on powermacs will need to
754 unable to use the 8250 module for PCMCIA or other 16C550-style
788 you can alter that using a kernel command line option such as
886 box, for instance in order to become a dial-in server. This driver
895 tristate "MSM on-chip serial port support"
906 tristate "QCOM on-chip GENI based serial port support"
917 Serial console driver for Qualcomm Technologies Inc's GENI based
921 bool "VIA VT8500 on-chip serial port support"
935 If you have a machine based on an Texas Instruments OMAP CPU you
939 with the omap-serial driver. DMA support can be enabled from platform
952 you can alter that using a kernel command line option such as
979 you can alter that using a kernel command line option such as
1072 BCM7xxx (STB) - DOCSIS console
1162 ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
1214 If you have an Atheros AR933X SOC based board and want to use the
1215 built-in UART of the SoC, say Y to this option.
1225 Enable a built-in UART port of the AR933X to be the system console.
1252 Driver for on-chip UART for ARC(Synopsys) for the legacy
1301 Support for the on-chip lpuart on some Freescale SOCs.
1317 Support for the on-chip LINFlexD UART on some Freescale SOCs.
1333 Support for the on-chip USART on Conexant Digicolor SoCs.
1348 This driver is for the on-chip Asynchronous Serial Controller on
1365 Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
1386 with "earlycon" on the kernel command line. The console is
1395 This driver is for the on-chip Serial Controller on
1415 based on the Armada-3700 SoC and wish to use the on-board serial
1427 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1438 Say 'Y' here if you wish to use the on-board serial port.
1457 Say 'Y' here if you wish to use the on-board serial port.
1479 int "Maximum number of CSIO/UART ports (1-8)"
1503 This driver is for the FPGA-based LiteUART serial controller from LiteX
1523 Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial
1539 called sunplus-uart.
1551 you can alter that using a kernel command line option such as
1574 but you can alter that using a kernel command line option such as
1585 When earlycon option is enabled the following kernel command line
1599 When earlycon option is enabled the following kernel command line