Lines Matching +full:10 +full:g +full:- +full:support
1 # SPDX-License-Identifier: GPL-2.0-only
5 comment "Host-side USB support is needed for USB Network Adapter support"
16 tristate "USB CATC NetMate-based Ethernet device support"
19 Say Y if you want to use one of the following 10Mbps USB Ethernet
35 tristate "USB KLSI KL5USB101-based ethernet device support"
37 Say Y here if you want to use one of the following 10Mbps only
40 ADS USB-10BT
45 D-Link DSB-650C and DU-E10
47 I-O DATA USB-ET/T
51 Mobility USB-Ethernet Adapter
52 NetGear EA-101
59 This driver is likely to work with most 10Mbps only USB Ethernet
61 SmartBridges smartNIC or on Belkin F5U111 devices - you should use
74 tristate "USB Pegasus/Pegasus-II based ethernet device support"
77 Say Y here if you know you have Pegasus or Pegasus-II based adapter.
89 tristate "USB RTL8150 based ethernet device support"
92 Say Y here if you have RTL8150 based usb-ethernet adapter.
108 This option adds support for Realtek RTL8152 based USB 2.0
109 10/100 Ethernet adapters and RTL8153 based USB 3.0 10/100/1000
123 This option adds support for Microchip LAN78XX based USB 2
124 & USB 3 10/100/1000 Ethernet adapters.
125 LAN7800 : USB 3 to 10/100/1000 Ethernet adapter
126 LAN7850 : USB 2 to 10/100/1000 Ethernet adapter
127 LAN7801 : USB 3 to 10/100/1000 Ethernet adapter (MAC only)
135 tristate "Multi-purpose USB Networking Framework"
145 - Another USB host, when using USB "network" or "data transfer"
150 - An intelligent USB gadget, perhaps embedding a Linux system.
153 CDC-Ethernet specification (including many cable modems).
155 - Network adapter hardware (like those for 10/100 Ethernet) which
159 a two-node link, or "eth0" for most CDC-Ethernet devices. Those
160 two-node links are most easily managed with Ethernet Bridging
163 For more information see <http://www.linux-usb.org/usbnet/>.
177 This option adds support for ASIX AX88xxx based USB 2.0
178 10/100 Ethernet adapters.
184 * Billionton Systems, GUSB2AM-1G-B
185 * Buffalo LUA-U2-KTX
186 * Corega FEther USB2-TX
187 * D-Link DUB-E100
191 * Sitecom LN-029
192 * Sitecom LN-028
195 * TrendNet TU2-ET100
207 This option adds support for ASIX AX88179 based USB 3.0/2.0
213 * Sitcomm LN-032
219 tristate "CDC Ethernet support (smart devices such as cable modems)"
229 that support USB connectivity, used for non-Microsoft USB hosts.
230 The Linux-USB CDC Ethernet Gadget driver is an open implementation.
247 tristate "CDC EEM support"
261 tristate "CDC NCM support"
266 This driver provides support for CDC NCM (Network Control Model
274 * ST-Ericsson M700 LTE FDD/TDD Mobile Broadband Modem (ref. design)
275 * ST-Ericsson M5730 HSPA+ Mobile Broadband Modem (reference design)
276 * ST-Ericsson M570 HSPA+ Mobile Broadband Modem (reference design)
277 * ST-Ericsson M343 HSPA Mobile Broadband Modem (reference design)
281 tristate "Huawei NCM embedded AT channel support"
286 This driver supports huawei-style NCM devices, that use NCM as a
296 tristate "CDC MBIM support"
301 This driver provides support for CDC MBIM (Mobile Broadband
308 through the associated /dev/cdc-wdmx character device.
314 tristate "Davicom DM96xx based USB 10/100 ethernet devices"
318 This option adds support for Davicom DM9601/DM9620/DM9621A
319 based USB 10/100 Ethernet adapters.
322 tristate "CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices"
326 This option adds support for CoreChip-sz SR9700 based USB 1.1
327 10/100 Ethernet adapters.
330 tristate "CoreChip-sz SR9800 based USB 2.0 10/100 ethernet devices"
335 device based on the CoreChip-sz SR9800 chip.
351 This option adds support for SMSC LAN75XX based USB 2.0
355 tristate "SMSC LAN95XX based USB 2.0 10/100 ethernet devices"
364 This option adds support for SMSC LAN95XX based USB 2.0
365 10/100 Ethernet adapters.
368 tristate "GeneSys GL620USB-A based cables"
371 Choose this option if you're using a host-to-host cable,
374 Note that the half-duplex "GL620USB" is not supported.
381 Choose this option if you're using a host-to-host cable based
386 tristate "Prolific PL-2301/2302/25A1/27A1 based cables"
391 Choose this option if you're using a host-to-host cable
398 Choose this option if you're using a 10/100 Ethernet USB2
409 various devices that may only support this protocol. A variant
427 without any device-specific information. Select it if you have
430 Note that while many USB host-to-host cables can work in this mode,
441 Choose this option if you're using a host-to-host cable
449 Choose this option if you're using a host-to-host cable
454 bool "eTEK based host-to-host cables (Advance, Belkin, ...)"
459 Choose this option if you're using a host-to-host cable
469 Choose this option to support the "usb-eth" networking driver
471 such as the SA-11x0 and PXA-25x UDCs, or the tftp capabilities
474 Linux-based "Gumstix" PXA-25x based systems use this protocol
486 Choose this option to support the usb networking links used
494 Choose this option if you're using a host-to-host cable
504 Choose this option to support the usb networking links used by
505 Zaurus models like the SL-5000D, SL-5500, SL-5600, A-300, B-500.
510 versions of OpenZaurus, you should no longer need to support this
511 protocol. Only the "eth-fd" or "net_fd" drivers in these devices
512 really need this non-conformant variant of CDC Ethernet (or in
519 Choose this option if you're using a Conexant CX82310-based ADSL
528 as Samsung GT-B3730.
534 tristate "QMI WWAN driver for Qualcomm MSM based 3G and LTE modems"
538 Support WWAN LTE/3G devices based on Qualcomm Mobile Data Modem
548 * cdc-wdm: Qualcomm MSM Interface (QMI) protocol on /dev/cdc-wdmx
550 A modem manager with support for QMI is recommended.
561 These cards support downlink speeds of 7.2Mbps or greater.
570 Choose this option if you're using a 14Mb USB-based PLC
575 tristate "CDC Phonet support"
578 Choose this option to support the Phonet interface to a Nokia
593 tristate "USB-to-WWAN Driver for Sierra Wireless modems"
596 Choose this option if you have a Sierra Wireless USB-to-WWAN device.
606 Select this if you want to use an LG Electronics 4G/LTE usb modem
612 4G modem from Verizon:
617 tristate "QingHeng CH9200 USB ethernet support"
628 tristate "Aquantia AQtion USB to 5/2.5GbE Controllers support"
632 This option adds support for Aquantia AQtion USB