Lines Matching full:advertisement
196 * advertisement register 7.515 and whether the status
198 * AN advertisement register 7.514.
200 * advertisement register [31:16] if supported.
259 * genphy_c45_an_config_aneg - configure advertisement registers
262 * Configure advertisement registers based on modes set in phydev->advertising
264 * Returns negative errno code on failure, 0 if advertisement didn't change,
471 * Advertisement registers filling in the link partner advertisement,
513 * genphy_c45_read_lpa - read the link partner advertisement and pause
517 * filling in the link partner advertisement, pause and asym_pause members
547 /* Read the link partner's base page advertisement */ in genphy_c45_read_lpa()
556 /* Read the link partner's 10G advertisement */ in genphy_c45_read_lpa()
681 * @adv: the linkmode advertisement settings
694 /* IEEE 802.3-2018 45.2.7.13 EEE advertisement 1 in genphy_c45_write_eee_adv()
712 /* IEEE 802.3-2022 45.2.7.16 EEE advertisement 2 in genphy_c45_write_eee_adv()
747 * @adv: the linkmode advertisement status
754 /* IEEE 802.3-2018 45.2.7.13 EEE advertisement 1 in genphy_c45_read_eee_adv()
765 /* IEEE 802.3-2022 45.2.7.16 EEE advertisement 2 in genphy_c45_read_eee_adv()
793 * @lpa: the linkmode LP advertisement status
939 * genphy_c45_an_config_eee_aneg - configure EEE advertisement
1124 * advertisement register 7.515 and whether the preference
1125 * is forced or not, it is read from BASE-T1 AN advertisement
1514 * Description: it reports the Supported/Advertisement/LP Advertisement
1539 * Description: sets the Supported/Advertisement/LP Advertisement