663  * register for fiber link.
689  *   enabled, then we write the BMCR. Adapted for fiber link in
707 	/* Setup fiber advertisement */  in marvell_config_aneg_fiber()
787 	/* Then the fiber link */  in m88e1111_config_aneg()
793 		/* Do not touch the fiber advertisement if we're in copper->sgmii mode.  in m88e1111_config_aneg()
823 	/* Do not touch the fiber page if we're in copper->sgmii mode */  in m88e1510_config_aneg()
827 	/* Then the fiber link */  in m88e1510_config_aneg()
1010 	 * it was previously disabled in the Fiber BMCR!  in m88e1111_config_init_1000basex()
1649  * @lpa: value of the MII_LPA register for fiber link
1665 				       int fiber, int status)  in marvell_read_status_page_an()  argument
1694 	if (!fiber) {  in marvell_read_status_page_an()
1705 		/* The fiber link is only 1000M capable */  in marvell_read_status_page_an()
1736 	int fiber;  in marvell_read_status_page()  local
1744 	 * and the PHY status register for fiber link status.  in marvell_read_status_page()
1755 		fiber = 1;  in marvell_read_status_page()
1757 		fiber = 0;  in marvell_read_status_page()
1764 	phydev->port = fiber ? PORT_FIBRE : PORT_TP;  in marvell_read_status_page()
1766 	if (fiber) {  in marvell_read_status_page()
1780 		err = marvell_read_status_page_an(phydev, fiber, status);  in marvell_read_status_page()
1789  * Some Marvell's phys have two modes: fiber and copper.
1792  *   First, check the fiber link and status.
1793  *   If the fiber link is down, check the copper link and status which
1800 	/* Check the fiber mode first */  in marvell_read_status()
1812 		/* If the fiber link is up, it is the selected and  in marvell_read_status()
1814 		 * fiber page. Please to be careful about that, avoid  in marvell_read_status()
1816 		 * could break the behaviour for some fiber phy like  in marvell_read_status()
1822 		/* If fiber link is down, check and save copper mode state */  in marvell_read_status()
1837  * Some Marvell's phys have two modes: fiber and copper.
1844 	/* Suspend the fiber mode first */  in marvell_suspend()
1872  * Some Marvell's phys have two modes: fiber and copper.
1879 	/* Resume the fiber mode first */  in marvell_resume()