1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3  *  linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
7  *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
130  * VDD2 - UHS2 or PCIe/NVMe
208 #define SDHCI_INT_ALL_MASK	((unsigned int)-1)
233 #define   SDHCI_CTRL_HS400		0x0005 /* Non-standard */
286 #define  SDHCI_CAN_VDD2_180	0x10000000 /* UHS-2 1.8V VDD2 */
287 #define  SDHCI_SUPPORT_HS400	0x80000000 /* Non-standard */
298 /* 4C-4F reserved for more max current */
306 /* 55-57 reserved */
311 /* 60-FB reserved */
319 #define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
354 #define SDHCI_DEFAULT_BOUNDARY_ARG   (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)
356 /* ADMA2 32-bit DMA descriptor size */
359 /* ADMA2 32-bit descriptor */
368 #define SDHCI_ADMA2_MASK	(SDHCI_ADMA2_ALIGN - 1)
372  * alignment for the descriptor table even in 32-bit DMA mode.  Memory
378  * ADMA2 64-bit DMA descriptor size
380  * descriptors for 64-bit addressing mode: 96-bit Descriptor and 128-bit
382  * register, 128-bit Descriptor will be selected.
384 #define SDHCI_ADMA2_64_DESC_SZ(host)	((host)->v4_mode ? 16 : 12)
387  * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte
420 	mmc_debugfs_err_stats_inc((host)->mmc, MMC_ERR_##err_name)
446 /* Controller can only DMA from 32-bit aligned addresses */
460 /* Controller does not provide transfer-complete interrupt when not busy */
464 /* Controller reports inverted write-protect state */
474 /* Controller cannot do multi-block transfers */
476 /* Controller can only handle 1-bit data transfers */
486 /* Controller uses Auto CMD12 command to stop the transfer */
488 /* Controller doesn't have HISPD bit field in HI-SPEED SD card */
501 /* Controller has a non-standard host control register */
507 /* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
509 /* Controller does not support 64-bit DMA */
513 /* Capability register bit-63 indicates HS400 support */
531  * 32-bit block count may not support eMMC where upper bits of CMD23 are used
532  * for other purposes.  Consequently we support 16-bit block count by default.
533  * Otherwise, SDHCI_QUIRK2_USE_32BIT_BLK_CNT can be selected to use 32-bit
567 #define SDHCI_AUTO_CMD12	(1<<6)	/* Auto CMD12 support */
568 #define SDHCI_AUTO_CMD23	(1<<7)	/* Auto CMD23 support */
570 #define SDHCI_USE_64_BIT_DMA	(1<<12)	/* Use 64-bit DMA */
585 	u8 drv_type;		/* Current UHS-I driver type */
586 	bool reinit_uhs;	/* Force UHS-related re-initialization */
660 	unsigned int		tuning_count;	/* Timer count for re-tuning */
661 	unsigned int		tuning_mode;	/* Re-tuning mode supported by host */
662 	unsigned int		tuning_err;	/* Error code for re-tuning */
733 	if (unlikely(host->ops->write_l))  in sdhci_writel()
734 		host->ops->write_l(host, val, reg);  in sdhci_writel()
736 		writel(val, host->ioaddr + reg);  in sdhci_writel()
741 	if (unlikely(host->ops->write_w))  in sdhci_writew()
742 		host->ops->write_w(host, val, reg);  in sdhci_writew()
744 		writew(val, host->ioaddr + reg);  in sdhci_writew()
749 	if (unlikely(host->ops->write_b))  in sdhci_writeb()
750 		host->ops->write_b(host, val, reg);  in sdhci_writeb()
752 		writeb(val, host->ioaddr + reg);  in sdhci_writeb()
757 	if (unlikely(host->ops->read_l))  in sdhci_readl()
758 		return host->ops->read_l(host, reg);  in sdhci_readl()
760 		return readl(host->ioaddr + reg);  in sdhci_readl()
765 	if (unlikely(host->ops->read_w))  in sdhci_readw()
766 		return host->ops->read_w(host, reg);  in sdhci_readw()
768 		return readw(host->ioaddr + reg);  in sdhci_readw()
773 	if (unlikely(host->ops->read_b))  in sdhci_readb()
774 		return host->ops->read_b(host, reg);  in sdhci_readb()
776 		return readb(host->ioaddr + reg);  in sdhci_readb()
783 	writel(val, host->ioaddr + reg);  in sdhci_writel()
788 	writew(val, host->ioaddr + reg);  in sdhci_writew()
793 	writeb(val, host->ioaddr + reg);  in sdhci_writeb()
798 	return readl(host->ioaddr + reg);  in sdhci_readl()
803 	return readw(host->ioaddr + reg);  in sdhci_readw()
808 	return readb(host->ioaddr + reg);  in sdhci_readb()
818 	return host->private;  in sdhci_priv()