Lines Matching +full:mipi +full:- +full:to +full:- +full:edp
1 # SPDX-License-Identifier: GPL-2.0-only
16 Say Y here to enable support for the Asia Better Technology Ltd.
17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18 and RG-99 handheld gaming consoles.
26 This driver supports the ARM Versatile panels connected to ARM
36 Say Y here if you want to enable support for the ASUS TMP5P5
45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46 as found in the YLM RS-97 handheld gaming console.
49 tristate "Boe BF060Y8M-AJ0 panel"
54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0
56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
65 Say Y here if you want to enable support for Boe Himax8279d
66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67 24 bit RGB per pixel. It provides a MIPI DSI interface to
68 the host and has a built-in LED backlight.
71 tristate "Boe TH101MB31UIG002-28A panel"
76 Say Y here if you want to enable support for Boe
77 TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
78 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
79 interface to the host and has a built-in LED backlight.
87 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
96 Say Y here if you want to support for BOE TV101WUM-LL2
105 Say Y here if you want to enable support for the EBBG FT8719
107 The panel has a resolution of 1080x2246. It provides a MIPI DSI
108 interface to the host.
116 Say Y here if you want to enable support for the Elida
117 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
126 Say Y here if you want to enable support for the Feixin K101 IM2BA02
127 4-lane 800x1280 MIPI DSI panel.
130 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
135 Say Y if you want to enable support for panels based on the
136 Feiyang FY07024DI26A30-D MIPI-DSI interface.
153 This driver supports LVDS panels that don't require device-specific
155 backlight handling if the panel is attached to a backlight controller.
158 tristate "Himax HX83102-based panels"
163 Say Y if you want to enable support for panels based on the
167 tristate "Himax HX83112A-based DSI panel"
173 Say Y here if you want to enable support for Himax HX83112A-based
177 tristate "HIMAX HX8394 MIPI-DSI LCD panels"
182 Say Y if you want to enable support for panels based on the
184 720x1440 TFT LCD panel that uses a MIPI-DSI interface.
186 If M is selected the module will be called panel-himax-hx8394.
193 Say Y here if you want to enable support for Ilitek IL9322
194 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
204 Say Y here if you want to enable support for Ilitek IL9341
209 tristate "Ilitek ILI9805-based panels"
214 Say Y if you want to enable support for panels based on the
218 tristate "Ilitek ILI9806E-based panels"
223 Say Y if you want to enable support for panels based on the
227 tristate "Ilitek ILI9881C-based panels"
232 Say Y if you want to enable support for panels based on the
236 tristate "Ilitek ILI9882t-based panels"
241 Say Y if you want to enable support for panels based on the
249 Say Y here to enable support for the Innolux/Chimei EJ030NA
250 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
259 Say Y here if you want to enable support for Innolux P079ZCA
260 TFT-LCD modules. The panel has a 1024x768 resolution and uses
261 24 bit RGB per pixel. It provides a MIPI DSI interface to
262 the host and has a built-in LED backlight.
265 tristate "Jadard JD9365DA-H3 WXGA DSI panel"
270 Say Y here if you want to enable support for Jadard JD9365DA-H3
271 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
280 Say Y here if you want to enable support for JDI LPM102A188A DSI
282 The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
283 to the host.
291 Say Y here if you want to enable support for JDI DSI video mode
302 Say Y here if you want to enable support for the JDI R63452
311 Say Y here if you want to enable support for Khadas TS050 TFT-LCD
313 24 bit RGB per pixel. It provides a MIPI DSI interface to
314 the host, a built-in LED backlight and touch controller.
322 Say Y here if you want to enable support for Kingdisplay kd097d04
323 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
324 24 bit RGB per pixel. It provides a MIPI DSI interface to
325 the host and has a built-in LED backlight.
333 Say Y here if you want to enable support for Leadtek LTK050H3146W
334 TFT-LCD modules. The panel has a 720x1280 resolution and uses
335 24 bit RGB per pixel. It provides a MIPI DSI interface to
336 the host and has a built-in LED backlight.
344 Say Y here if you want to enable support for Kingdisplay kd097d04
345 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
346 24 bit RGB per pixel. It provides a MIPI DSI interface to
347 the host and has a built-in LED backlight.
355 Say Y here if you want to enable support for lincolntech lcd197
356 TFT-LCD modules. The panel has a 1080x1920 resolution and uses
357 24 bit RGB per pixel. It provides a MIPI DSI interface to
364 Say Y here if you want to enable support for the LB035Q02 RGB panel
365 (found on the Gumstix Overo Palo35 board). To compile this driver as
373 Say Y here if you want to enable support for LG4573 RGB panel.
374 To compile this driver as a module, choose M here.
384 Say Y here if you want to enable support for LG sw43408 panel.
386 pixel. It provides a MIPI DSI interface to the host and has a
387 built-in LED backlight.
398 video data via DSI but commands via 9-bit SPI using DBI.
401 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
406 Say Y here if you want to enable support for the Mantix
407 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
415 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
416 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
434 Say Y here if you want to enable support for the panels built
443 Say Y here if you want to enable support for the panels built
454 Say Y here if you want to enable the Novatek NT35560 display
465 Say Y here if you want to enable support for the panels built
476 Say Y here if you want to enable support for the panels built
486 Say Y here if you want to enable support for the panels built
496 Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
506 Say Y here if you want to enable support for the panels built
510 tristate "Olimex LCD-OLinuXino panel"
516 The panel is used with different sizes LCDs, from 480x272 to
519 Say Y here if you want to enable support for Olimex Ltd.
520 LCD-OLinuXino panel.
528 Say Y here if you want to enable support for the panels built
537 Say Y here if you want to enable support for Orise Technology
541 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
546 Say Y here if you want to enable support for One Stop Displays
547 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
555 Say Y here if you want to enable support for Panasonic VVX10F034N00
556 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
560 tristate "Raspberry Pi 7-inch touchscreen panel"
563 Say Y here if you want to enable support for the Raspberry
564 Pi 7" Touchscreen. To compile this driver as a module,
573 Say Y here if you want to enable support for Raydium RM67191 FHD
582 Say Y here if you want to enable support for Raydium RM68200
586 tristate "Raydium RM692E5-based DSI panel"
593 Say Y here if you want to enable support for Raydium RM692E5-based
597 tristate "Raydium RM69380-based DSI panel"
602 Say Y here if you want to enable support for Raydium RM69380-based
614 Say Y here if you want to enable support for Ronbo Electronics
623 Say Y or M here if you want to enable support for the
632 Say Y or M here if you want to enable support for the
641 Say Y here if you want to enable support for Samsung AMS427AP24 panel
643 GT-I9195I). To compile this driver as a module, choose M here.
652 tristate "Samsung ATNA33XC20 eDP panel"
662 sequencing is non-standard.
665 tristate "Samsung DB7430-based DPI panels"
670 Say Y here if you want to enable support for the Samsung
686 Say Y here if you want to enable support for the Samsung S6E3FA7
700 Say Y here if you want to enable support for the Samsung
704 GT-I8160 mobile phone.
707 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
740 Say Y here if you want to enable support for Samsung S6E63M0
751 Say Y here if you want to be able to access the Samsung
759 Say Y here if you want to be able to access the Samsung
775 Say Y or M here if you want to enable support for the Samsung AMOLED
786 Say Y here if you want to enable support for the Seiko
795 Say Y here if you want to enable support for Sharp LQ101R1SX01
796 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
797 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
798 the host and has a built-in LED backlight.
800 To compile this driver as a module, choose M here: the module
801 will be called panel-sharp-lq101r1sx01.
807 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
816 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
825 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
836 Say Y here if you want to enable support for the Sitronix
837 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
841 tristate "Sitronix ST7703 based MIPI touchscreen panels"
846 Say Y here if you want to enable support for Sitronix ST7703 based
847 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
850 Touch input support is provided by the goodix driver and needs to be
858 Say Y here if you want to enable support for the Sitronix
866 Say Y here if you want to enable support for the Sony ACX565AKM
875 Say Y here if you want to enable support for the Sony Tama
885 Say Y here if you want to enable support for the Sony Tulip
895 Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
896 based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
897 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
898 the host, a built-in LED backlight and touch controller.
911 DRM panel driver for dumb eDP panels that need at most a regulator and
912 a GPIO to be powered up. Optionally a backlight can be attached so
917 tristate "support for simple panels (other than eDP ones)"
923 DRM panel driver for dumb non-eDP panels that need at most a regulator
924 and a GPIO to be powered up. Optionally a backlight can be attached so
929 tristate "Synaptics R63353-based panels"
934 Say Y if you want to enable support for panels based on the
943 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
945 24 bit RGB per pixel. It provides a MIPI DSI interface to
946 the host, a built-in LED backlight and touch controller.
953 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
960 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
968 Say Y here if you want to enable support for TPO TPG110
969 400CH LTPS TFT LCD Single Chip Digital Driver for up to
977 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
988 Say Y here if you want to enable support for Visionox
996 Say Y here if you want to enable support for Visionox
1005 Say Y here if you want to enable support for Visionox
1014 Say Y here if you want to enable support for the Widechips WS2401 DPI
1016 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
1024 Say Y here if you want to enable support for the Xinpeng
1025 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI