Lines Matching +full:dpi +full:- +full:to +full:- +full:lvds
1 # SPDX-License-Identifier: GPL-2.0-only
16 Say Y here to enable support for the Asia Better Technology Ltd.
17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18 and RG-99 handheld gaming consoles.
26 This driver supports the ARM Versatile panels connected to ARM
36 Say Y here if you want to enable support for the ASUS TMP5P5
45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46 as found in the YLM RS-97 handheld gaming console.
49 tristate "Boe BF060Y8M-AJ0 panel"
54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0
56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
65 Say Y here if you want to enable support for Boe Himax8279d
66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67 24 bit RGB per pixel. It provides a MIPI DSI interface to
68 the host and has a built-in LED backlight.
71 tristate "Boe TH101MB31UIG002-28A panel"
76 Say Y here if you want to enable support for Boe
77 TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
79 interface to the host and has a built-in LED backlight.
87 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
96 Say Y here if you want to support for BOE TV101WUM-LL2
105 Say Y here if you want to enable support for the EBBG FT8719
108 interface to the host.
116 Say Y here if you want to enable support for the Elida
117 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
126 Say Y here if you want to enable support for the Feixin K101 IM2BA02
127 4-lane 800x1280 MIPI DSI panel.
130 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
135 Say Y if you want to enable support for panels based on the
136 Feiyang FY07024DI26A30-D MIPI-DSI interface.
148 tristate "Generic LVDS panel driver"
153 This driver supports LVDS panels that don't require device-specific
155 backlight handling if the panel is attached to a backlight controller.
158 tristate "Himax HX83102-based panels"
163 Say Y if you want to enable support for panels based on the
167 tristate "Himax HX83112A-based DSI panel"
173 Say Y here if you want to enable support for Himax HX83112A-based
177 tristate "HIMAX HX8394 MIPI-DSI LCD panels"
182 Say Y if you want to enable support for panels based on the
184 720x1440 TFT LCD panel that uses a MIPI-DSI interface.
186 If M is selected the module will be called panel-himax-hx8394.
193 Say Y here if you want to enable support for Ilitek IL9322
194 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
204 Say Y here if you want to enable support for Ilitek IL9341
209 tristate "Ilitek ILI9805-based panels"
214 Say Y if you want to enable support for panels based on the
218 tristate "Ilitek ILI9806E-based panels"
223 Say Y if you want to enable support for panels based on the
227 tristate "Ilitek ILI9881C-based panels"
232 Say Y if you want to enable support for panels based on the
236 tristate "Ilitek ILI9882t-based panels"
241 Say Y if you want to enable support for panels based on the
249 Say Y here to enable support for the Innolux/Chimei EJ030NA
250 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
259 Say Y here if you want to enable support for Innolux P079ZCA
260 TFT-LCD modules. The panel has a 1024x768 resolution and uses
261 24 bit RGB per pixel. It provides a MIPI DSI interface to
262 the host and has a built-in LED backlight.
265 tristate "Jadard JD9365DA-H3 WXGA DSI panel"
270 Say Y here if you want to enable support for Jadard JD9365DA-H3
280 Say Y here if you want to enable support for JDI LPM102A188A DSI
283 to the host.
291 Say Y here if you want to enable support for JDI DSI video mode
302 Say Y here if you want to enable support for the JDI R63452
311 Say Y here if you want to enable support for Khadas TS050 TFT-LCD
313 24 bit RGB per pixel. It provides a MIPI DSI interface to
314 the host, a built-in LED backlight and touch controller.
322 Say Y here if you want to enable support for Kingdisplay kd097d04
323 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
324 24 bit RGB per pixel. It provides a MIPI DSI interface to
325 the host and has a built-in LED backlight.
333 Say Y here if you want to enable support for Leadtek LTK050H3146W
334 TFT-LCD modules. The panel has a 720x1280 resolution and uses
335 24 bit RGB per pixel. It provides a MIPI DSI interface to
336 the host and has a built-in LED backlight.
344 Say Y here if you want to enable support for Kingdisplay kd097d04
345 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
346 24 bit RGB per pixel. It provides a MIPI DSI interface to
347 the host and has a built-in LED backlight.
355 Say Y here if you want to enable support for lincolntech lcd197
356 TFT-LCD modules. The panel has a 1080x1920 resolution and uses
357 24 bit RGB per pixel. It provides a MIPI DSI interface to
364 Say Y here if you want to enable support for the LB035Q02 RGB panel
365 (found on the Gumstix Overo Palo35 board). To compile this driver as
373 Say Y here if you want to enable support for LG4573 RGB panel.
374 To compile this driver as a module, choose M here.
384 Say Y here if you want to enable support for LG sw43408 panel.
386 pixel. It provides a MIPI DSI interface to the host and has a
387 built-in LED backlight.
398 video data via DSI but commands via 9-bit SPI using DBI.
401 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
406 Say Y here if you want to enable support for the Mantix
407 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
415 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
416 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
434 Say Y here if you want to enable support for the panels built
443 Say Y here if you want to enable support for the panels built
454 Say Y here if you want to enable the Novatek NT35560 display
465 Say Y here if you want to enable support for the panels built
476 Say Y here if you want to enable support for the panels built
486 Say Y here if you want to enable support for the panels built
496 Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
506 Say Y here if you want to enable support for the panels built
510 tristate "Olimex LCD-OLinuXino panel"
516 The panel is used with different sizes LCDs, from 480x272 to
519 Say Y here if you want to enable support for Olimex Ltd.
520 LCD-OLinuXino panel.
528 Say Y here if you want to enable support for the panels built
537 Say Y here if you want to enable support for Orise Technology
541 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
546 Say Y here if you want to enable support for One Stop Displays
547 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
555 Say Y here if you want to enable support for Panasonic VVX10F034N00
556 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
560 tristate "Raspberry Pi 7-inch touchscreen panel"
563 Say Y here if you want to enable support for the Raspberry
564 Pi 7" Touchscreen. To compile this driver as a module,
573 Say Y here if you want to enable support for Raydium RM67191 FHD
582 Say Y here if you want to enable support for Raydium RM68200
586 tristate "Raydium RM692E5-based DSI panel"
593 Say Y here if you want to enable support for Raydium RM692E5-based
597 tristate "Raydium RM69380-based DSI panel"
602 Say Y here if you want to enable support for Raydium RM69380-based
614 Say Y here if you want to enable support for Ronbo Electronics
623 Say Y or M here if you want to enable support for the
632 Say Y or M here if you want to enable support for the
641 Say Y here if you want to enable support for Samsung AMS427AP24 panel
643 GT-I9195I). To compile this driver as a module, choose M here.
662 sequencing is non-standard.
665 tristate "Samsung DB7430-based DPI panels"
670 Say Y here if you want to enable support for the Samsung
671 DB7430 DPI display controller used in such devices as the
672 LMS397KF04 480x800 DPI panel.
686 Say Y here if you want to enable support for the Samsung S6E3FA7
696 tristate "Samsung S6D27A1 DPI panel driver"
700 Say Y here if you want to enable support for the Samsung
701 S6D27A1 DPI 480x800 panel.
704 GT-I8160 mobile phone.
707 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
740 Say Y here if you want to enable support for Samsung S6E63M0
751 Say Y here if you want to be able to access the Samsung
759 Say Y here if you want to be able to access the Samsung
775 Say Y or M here if you want to enable support for the Samsung AMOLED
786 Say Y here if you want to enable support for the Seiko
795 Say Y here if you want to enable support for Sharp LQ101R1SX01
796 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
797 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
798 the host and has a built-in LED backlight.
800 To compile this driver as a module, choose M here: the module
801 will be called panel-sharp-lq101r1sx01.
807 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
816 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
825 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
836 Say Y here if you want to enable support for the Sitronix
846 Say Y here if you want to enable support for Sitronix ST7703 based
850 Touch input support is provided by the goodix driver and needs to be
858 Say Y here if you want to enable support for the Sitronix
866 Say Y here if you want to enable support for the Sony ACX565AKM
875 Say Y here if you want to enable support for the Sony Tama
885 Say Y here if you want to enable support for the Sony Tulip
895 Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
896 based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
897 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
898 the host, a built-in LED backlight and touch controller.
912 a GPIO to be powered up. Optionally a backlight can be attached so
923 DRM panel driver for dumb non-eDP panels that need at most a regulator
924 and a GPIO to be powered up. Optionally a backlight can be attached so
929 tristate "Synaptics R63353-based panels"
934 Say Y if you want to enable support for panels based on the
943 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
945 24 bit RGB per pixel. It provides a MIPI DSI interface to
946 the host, a built-in LED backlight and touch controller.
953 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
960 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
968 Say Y here if you want to enable support for TPO TPG110
969 400CH LTPS TFT LCD Single Chip Digital Driver for up to
977 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
988 Say Y here if you want to enable support for Visionox
996 Say Y here if you want to enable support for Visionox
1005 Say Y here if you want to enable support for Visionox
1009 tristate "Widechips WS2401 DPI panel driver"
1014 Say Y here if you want to enable support for the Widechips WS2401 DPI
1016 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
1024 Say Y here if you want to enable support for the Xinpeng