Lines Matching +full:hardware +full:- +full:bound
1 # SPDX-License-Identifier: GPL-2.0
35 bool "ePAPR para-virtualization support"
37 Enables ePAPR para-virtualization support for guests.
45 Support for running natively on the hardware, i.e. without
46 a hypervisor. This option is not user-selectable but should
63 bool "Device-tree based CPU feature discovery & setup"
95 The MPIC global timer is a hardware timer inside the
97 specified interval times out, the hardware timer generates
122 registers are used for inter-processor communication.
204 bool "On-chip CPU temperature sensor support"
207 G3 and G4 processors have an on-chip temperature sensor called the
208 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
209 temperature within 2-4 degrees Celsius. This option shows the current
210 on-die temperature in /proc/cpuinfo if the cpu supports it.
222 a timer is used to re-check the temperature periodically.
230 The TAU hardware can compare the temperature to an upper and lower
231 bound. The default behavior is to show both the upper and lower
232 bound in /proc/cpuinfo. If the range is large, the temperature is
233 either changing a lot, or the TAU hardware is broken (likely on some
247 Say Y here if you're going to use hardware that connects to the
296 bool "MPC8349E-mITX MCU driver"
300 Say Y here to enable soft power-off functionality on the Freescale
301 boards with the MPC8349E-mITX-compatible MCU chips. This driver will