Lines Matching +full:firmware +full:- +full:gpios
1 # SPDX-License-Identifier: GPL-2.0
35 bool "ePAPR para-virtualization support"
37 Enables ePAPR para-virtualization support for guests.
46 a hypervisor. This option is not user-selectable but should
50 bool "Support booting from Open Firmware or yaboot"
55 Support from booting from Open Firmware or yaboot using an
56 Open Firmware client interface. This enables the kernel to
57 communicate with open firmware to retrieve system information
63 bool "Device-tree based CPU feature discovery & setup"
69 binding if the firmware provides it. Currently only the skiboot
70 firmware provides this binding.
122 registers are used for inter-processor communication.
148 tristate "Firmware flash interface"
204 bool "On-chip CPU temperature sensor support"
207 G3 and G4 processors have an on-chip temperature sensor called the
208 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
209 temperature within 2-4 degrees Celsius. This option shows the current
210 on-die temperature in /proc/cpuinfo if the cpu supports it.
222 a timer is used to re-check the temperature periodically.
248 QE GPIOs.
296 bool "MPC8349E-mITX MCU driver"
300 Say Y here to enable soft power-off functionality on the Freescale
301 boards with the MPC8349E-mITX-compatible MCU chips. This driver will
302 also register MCU GPIOs with the generic GPIO API, so you'll able
303 to use MCU pins as GPIOs.