Lines Matching +full:mpc5200 +full:- +full:i2c

1 // SPDX-License-Identifier: GPL-2.0-or-later
9 /dts-v1/;
14 	#address-cells = <1>;
15 	#size-cells = <1>;
16 	interrupt-parent = <&mpc5200_pic>;
19 		#address-cells = <1>;
20 		#size-cells = <0>;
25 			d-cache-line-size = <32>;
26 			i-cache-line-size = <32>;
27 			d-cache-size = <0x4000>;	// L1, 16K
28 			i-cache-size = <0x4000>;	// L1, 16K
29 			timebase-frequency = <0>;	// from bootloader
30 			bus-frequency = <0>;		// from bootloader
31 			clock-frequency = <0>;		// from bootloader
41 		#address-cells = <1>;
42 		#size-cells = <1>;
43 		compatible = "fsl,mpc5200-immr";
46 		bus-frequency = <0>;		// from bootloader
47 		system-frequency = <0>;		// from bootloader
50 			compatible = "fsl,mpc5200-cdm";
54 		mpc5200_pic: interrupt-controller@500 {
56 			interrupt-controller;
57 			#interrupt-cells = <3>;
58 			compatible = "fsl,mpc5200-pic";
63 			compatible = "fsl,mpc5200-gpt";
66 			fsl,has-wdt;
70 			compatible = "fsl,mpc5200-mscan";
76 			compatible = "fsl,mpc5200-mscan";
82 			compatible = "fsl,mpc5200-gpio";
85 			gpio-controller;
86 			#gpio-cells = <2>;
90 			compatible = "fsl,mpc5200-ohci","ohci-be";
95 		dma-controller@1200 {
96 			compatible = "fsl,mpc5200-bestcomm";
105 			compatible = "fsl,mpc5200-xlb";
110 			compatible = "fsl,mpc5200-psc-uart";
116 			compatible = "fsl,mpc5200-psc-uart";
122 			compatible = "fsl,mpc5200-psc-uart";
128 			compatible = "fsl,mpc5200-fec";
130 			local-mac-address = [ 00 00 00 00 00 00 ];
132 			phy-handle = <&phy0>;
136 			#address-cells = <1>;
137 			#size-cells = <0>;
138 			compatible = "fsl,mpc5200-mdio";
142 			phy0: ethernet-phy@0 {
148 			compatible = "fsl,mpc5200-ata";
153 		i2c@3d40 {
154 			#address-cells = <1>;
155 			#size-cells = <0>;
156 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
167 			compatible = "fsl,mpc5200-sram";
173 		compatible = "fsl,mpc5200-lpb","simple-bus";
174 		#address-cells = <2>;
175 		#size-cells = <1>;
179 			compatible = "cfi-flash";
181 			bank-width = <4>;
182 			device-width = <2>;
183 			#size-cells = <1>;
184 			#address-cells = <1>;
189 		#interrupt-cells = <1>;
190 		#size-cells = <2>;
191 		#address-cells = <3>;
193 		compatible = "fsl,mpc5200-pci";
195 		interrupt-map-mask = <0xf800 0 0 7>;
196 		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
200 		clock-frequency = <0>; // From boot loader
202 		bus-range = <0 0>;