Lines Matching +full:keyup +full:- +full:threshold +full:- +full:microvolt
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/linux-event-codes.h>
7 #include <dt-bindings/pinctrl/rockchip.h>
8 #include "rk3566-powkiddy-rk2023.dtsi"
15 stdout-path = "serial2:1500000n8";
18 adc_keys: adc-keys {
19 compatible = "adc-keys";
20 io-channels = <&saradc 0>;
21 io-channel-names = "buttons";
22 keyup-threshold-microvolt = <1800000>;
23 poll-interval = <60>;
29 button-mode {
32 press-threshold-microvolt = <1750>;
38 charge-full-design-microamp-hours = <5000000>;
42 compatible = "realtek,rtl8723ds-bt";
46 assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
48 assigned-clock-rates = <32768>, <1200000000>,
54 compatible = "powkiddy,rgb30-panel";
57 pinctrl-names = "default";
58 pinctrl-0 = <&lcd_rst>;
59 reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
60 vcc-supply = <&vcc3v3_lcd0_n>;
61 iovcc-supply = <&vcc3v3_lcd0_n>;
65 remote-endpoint = <&mipi_out_panel>;
75 fcs,suspend-voltage-selector = <1>;
76 regulator-min-microvolt = <712500>;
77 regulator-max-microvolt = <1390000>;
78 regulator-name = "vdd_cpu";
79 regulator-ramp-delay = <2300>;
80 vin-supply = <&vcc_sys>;
81 regulator-state-mem {
82 regulator-off-in-suspend;