Lines Matching +full:suspend +full:- +full:address
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Based on rk3328-nanopi-r2s.dts, which is:
4 * Copyright (c) 2020 David Bauer <mail@david-bauer.net>
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/leds/common.h>
21 stdout-path = "serial2:1500000n8";
24 gmac_clk: gmac-clock {
25 compatible = "fixed-clock";
26 clock-frequency = <125000000>;
27 clock-output-names = "gmac_clkin";
28 #clock-cells = <0>;
32 compatible = "gpio-leds";
33 pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
34 pinctrl-names = "default";
36 led-0 {
42 led-1 {
46 linux,default-trigger = "heartbeat";
49 led-2 {
56 vcc_sd: regulator-sdmmc {
57 compatible = "regulator-fixed";
59 pinctrl-0 = <&sdmmc0m1_pin>;
60 pinctrl-names = "default";
61 regulator-name = "vcc_sd";
62 regulator-boot-on;
63 vin-supply = <&vcc_io>;
66 vcc_sys: regulator-vcc-sys {
67 compatible = "regulator-fixed";
68 regulator-name = "vcc_sys";
69 regulator-always-on;
70 regulator-boot-on;
71 regulator-min-microvolt = <5000000>;
72 regulator-max-microvolt = <5000000>;
75 vdd_5v_lan: regulator-vdd-5v-lan {
76 compatible = "regulator-fixed";
77 enable-active-high;
79 pinctrl-0 = <&lan_vdd_pin>;
80 pinctrl-names = "default";
81 regulator-name = "vdd_5v_lan";
82 regulator-always-on;
83 regulator-boot-on;
84 vin-supply = <&vcc_sys>;
89 cpu-supply = <&vdd_arm>;
93 cpu-supply = <&vdd_arm>;
97 cpu-supply = <&vdd_arm>;
101 cpu-supply = <&vdd_arm>;
109 assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
110 assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
112 phy-supply = <&vcc_io>;
113 pinctrl-0 = <&rgmiim1_pins>;
114 pinctrl-names = "default";
117 compatible = "snps,dwmac-mdio";
118 #address-cells = <1>;
119 #size-cells = <0>;
129 interrupt-parent = <&gpio1>;
131 #clock-cells = <1>;
132 clock-output-names = "xin32k", "rk805-clkout2";
133 gpio-controller;
134 #gpio-cells = <2>;
135 pinctrl-0 = <&pmic_int_l>;
136 pinctrl-names = "default";
137 system-power-controller;
138 wakeup-source;
140 vcc1-supply = <&vcc_sys>;
141 vcc2-supply = <&vcc_sys>;
142 vcc3-supply = <&vcc_sys>;
143 vcc4-supply = <&vcc_sys>;
144 vcc5-supply = <&vcc_io>;
145 vcc6-supply = <&vcc_sys>;
149 regulator-name = "vdd_log";
150 regulator-always-on;
151 regulator-boot-on;
152 regulator-min-microvolt = <712500>;
153 regulator-max-microvolt = <1450000>;
154 regulator-ramp-delay = <12500>;
156 regulator-state-mem {
157 regulator-on-in-suspend;
158 regulator-suspend-microvolt = <1000000>;
163 regulator-name = "vdd_arm";
164 regulator-always-on;
165 regulator-boot-on;
166 regulator-min-microvolt = <712500>;
167 regulator-max-microvolt = <1450000>;
168 regulator-ramp-delay = <12500>;
170 regulator-state-mem {
171 regulator-on-in-suspend;
172 regulator-suspend-microvolt = <950000>;
177 regulator-name = "vcc_ddr";
178 regulator-always-on;
179 regulator-boot-on;
181 regulator-state-mem {
182 regulator-on-in-suspend;
187 regulator-name = "vcc_io";
188 regulator-always-on;
189 regulator-boot-on;
190 regulator-min-microvolt = <3300000>;
191 regulator-max-microvolt = <3300000>;
193 regulator-state-mem {
194 regulator-on-in-suspend;
195 regulator-suspend-microvolt = <3300000>;
200 regulator-name = "vcc_18";
201 regulator-always-on;
202 regulator-boot-on;
203 regulator-min-microvolt = <1800000>;
204 regulator-max-microvolt = <1800000>;
206 regulator-state-mem {
207 regulator-on-in-suspend;
208 regulator-suspend-microvolt = <1800000>;
213 regulator-name = "vcc18_emmc";
214 regulator-always-on;
215 regulator-boot-on;
216 regulator-min-microvolt = <1800000>;
217 regulator-max-microvolt = <1800000>;
219 regulator-state-mem {
220 regulator-on-in-suspend;
221 regulator-suspend-microvolt = <1800000>;
226 regulator-name = "vdd_10";
227 regulator-always-on;
228 regulator-boot-on;
229 regulator-min-microvolt = <1000000>;
230 regulator-max-microvolt = <1000000>;
232 regulator-state-mem {
233 regulator-on-in-suspend;
234 regulator-suspend-microvolt = <1000000>;
242 pmuio-supply = <&vcc_io>;
243 vccio1-supply = <&vcc_io>;
244 vccio2-supply = <&vcc18_emmc>;
245 vccio3-supply = <&vcc_io>;
246 vccio4-supply = <&vcc_io>;
247 vccio5-supply = <&vcc_io>;
248 vccio6-supply = <&vcc_io>;
254 eth_phy_reset_pin: eth-phy-reset-pin {
260 lan_led_pin: lan-led-pin {
264 sys_led_pin: sys-led-pin {
268 wan_led_pin: wan-led-pin {
274 lan_vdd_pin: lan-vdd-pin {
280 pmic_int_l: pmic-int-l {
291 bus-width = <4>;
292 cap-sd-highspeed;
293 disable-wp;
294 pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
295 pinctrl-names = "default";
296 vmmc-supply = <&vcc_sd>;
304 compatible = "jedec,spi-nor";
306 spi-max-frequency = <50000000>;
311 rockchip,hw-tshut-mode = <0>;
312 rockchip,hw-tshut-polarity = <0>;
340 #address-cells = <1>;
341 #size-cells = <0>;