Lines Matching +full:connect +full:- +full:gpios
1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree Source for the Salvator-X 2nd version board
5 * Copyright (C) 2015-2017 Renesas Electronics Corp.
8 #include "salvator-common.dtsi"
11 model = "Renesas Salvator-X 2nd version board";
12 compatible = "renesas,salvator-xs";
16 clock-frequency = <16640000>;
20 clock-frequency = <400000>;
22 versaclock6: clock-generator@6a {
25 #clock-cells = <1>;
27 clock-names = "xin";
29 idt,output-enable-active = <1>;
35 pcie-sata-switch-hog {
36 gpio-hog;
37 gpios = <7 GPIO_ACTIVE_HIGH>;
38 output-low; /* enable SATA by default */
39 line-name = "PCIE/SATA switch";
43 /* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
64 * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins
65 * (when SW31 is the default setting on Salvator-XS).
66 * - If SW31 is the default setting, you cannot use USB2.0 ch3 on
67 * r8a77951 with Salvator-XS.
69 * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF:
70 * - Connect GP6_3[01] to ADV7842.
71 * 2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON:
72 * - Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power).
73 * - Connect GP6_{04,21} to ADV7842.
82 pinctrl-0 = <&usb2_ch3_pins>;
83 pinctrl-names = "default";