Lines Matching +full:rzg2l +full:- +full:irqc
1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/interrupt-controller/irqc-rzg2l.h>
10 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
38 reg_1p8v: regulator-1p8v {
39 compatible = "regulator-fixed";
40 regulator-name = "fixed-1.8V";
41 regulator-min-microvolt = <1800000>;
42 regulator-max-microvolt = <1800000>;
43 regulator-boot-on;
44 regulator-always-on;
47 reg_3p3v: regulator-3p3v {
48 compatible = "regulator-fixed";
49 regulator-name = "fixed-3.3V";
50 regulator-min-microvolt = <3300000>;
51 regulator-max-microvolt = <3300000>;
52 regulator-boot-on;
53 regulator-always-on;
56 reg_1p1v: regulator-vdd-core {
57 compatible = "regulator-fixed";
58 regulator-name = "fixed-1.1V";
59 regulator-min-microvolt = <1100000>;
60 regulator-max-microvolt = <1100000>;
61 regulator-boot-on;
62 regulator-always-on;
65 vccq_sdhi0: regulator-vccq-sdhi0 {
66 compatible = "regulator-gpio";
68 regulator-name = "SDHI0 VccQ";
69 regulator-min-microvolt = <1800000>;
70 regulator-max-microvolt = <3300000>;
72 regulator-boot-on;
74 regulator-always-on;
78 x2: x2-clock {
79 compatible = "fixed-clock";
80 #clock-cells = <0>;
81 clock-frequency = <32768>;
86 pinctrl-0 = <&adc_pins>;
87 pinctrl-names = "default";
90 /delete-node/ channel@6;
91 /delete-node/ channel@7;
95 pinctrl-0 = <ð0_pins>;
96 pinctrl-names = "default";
97 phy-handle = <&phy0>;
98 phy-mode = "rgmii-id";
101 phy0: ethernet-phy@7 {
102 compatible = "ethernet-phy-id0022.1640",
103 "ethernet-phy-ieee802.3-c22";
105 interrupts-extended = <&irqc RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>;
106 rxc-skew-psec = <2400>;
107 txc-skew-psec = <2400>;
108 rxdv-skew-psec = <0>;
109 txen-skew-psec = <0>;
110 rxd0-skew-psec = <0>;
111 rxd1-skew-psec = <0>;
112 rxd2-skew-psec = <0>;
113 rxd3-skew-psec = <0>;
114 txd0-skew-psec = <0>;
115 txd1-skew-psec = <0>;
116 txd2-skew-psec = <0>;
117 txd3-skew-psec = <0>;
122 pinctrl-0 = <ð1_pins>;
123 pinctrl-names = "default";
124 phy-handle = <&phy1>;
125 phy-mode = "rgmii-id";
128 phy1: ethernet-phy@7 {
129 compatible = "ethernet-phy-id0022.1640",
130 "ethernet-phy-ieee802.3-c22";
132 interrupts-extended = <&irqc RZG2L_IRQ3 IRQ_TYPE_LEVEL_LOW>;
133 rxc-skew-psec = <2400>;
134 txc-skew-psec = <2400>;
135 rxdv-skew-psec = <0>;
136 txen-skew-psec = <0>;
137 rxd0-skew-psec = <0>;
138 rxd1-skew-psec = <0>;
139 rxd2-skew-psec = <0>;
140 rxd3-skew-psec = <0>;
141 txd0-skew-psec = <0>;
142 txd1-skew-psec = <0>;
143 txd2-skew-psec = <0>;
144 txd3-skew-psec = <0>;
149 clock-frequency = <24000000>;
153 mali-supply = <®_1p1v>;
160 reg-names = "main", "rtc";
163 clock-names = "xin";
183 power-source = <1800>;
184 output-enable;
202 power-source = <1800>;
213 power-source = <1800>;
214 output-enable;
232 power-source = <1800>;
240 gpio-sd0-pwr-en-hog {
241 gpio-hog;
243 output-high;
244 line-name = "gpio_sd0_pwr_en";
248 qspi0-data {
250 power-source = <1800>;
253 qspi0-ctrl {
255 power-source = <1800>;
266 sd0-dev-sel-hog {
267 gpio-hog;
269 output-high;
270 line-name = "sd0_dev_sel";
277 power-source = <1800>;
282 power-source = <1800>;
287 power-source = <1800>;
294 power-source = <3300>;
299 power-source = <3300>;
310 power-source = <1800>;
315 power-source = <1800>;
325 pinctrl-0 = <&qspi0_pins>;
326 pinctrl-names = "default";
330 compatible = "micron,mt25qu512a", "jedec,spi-nor";
332 m25p,fast-read;
333 spi-max-frequency = <50000000>;
334 spi-rx-bus-width = <4>;
335 spi-tx-bus-width = <4>;
338 compatible = "fixed-partitions";
339 #address-cells = <1>;
340 #size-cells = <1>;
362 pinctrl-0 = <&sdhi0_pins>;
363 pinctrl-1 = <&sdhi0_pins_uhs>;
364 pinctrl-names = "default", "state_uhs";
366 vmmc-supply = <®_3p3v>;
367 vqmmc-supply = <&vccq_sdhi0>;
368 bus-width = <4>;
369 sd-uhs-sdr50;
370 sd-uhs-sdr104;
377 pinctrl-0 = <&sdhi0_emmc_pins>;
378 pinctrl-1 = <&sdhi0_emmc_pins>;
379 pinctrl-names = "default", "state_uhs";
381 vmmc-supply = <®_3p3v>;
382 vqmmc-supply = <®_1p8v>;
383 bus-width = <8>;
384 mmc-hs200-1_8v;
385 non-removable;
386 fixed-emmc-driver-type = <1>;
393 timeout-sec = <60>;
398 timeout-sec = <60>;