Lines Matching +full:regulator +full:- +full:fixed +full:- +full:clock
1 // SPDX-License-Identifier: GPL-2.0
9 #include <dt-bindings/gpio/gpio.h>
30 stdout-path = "serial0:115200n8";
33 hdmi0-out {
34 compatible = "hdmi-connector";
39 remote-endpoint = <&rcar_dw_hdmi0_out>;
45 compatible = "gpio-leds";
64 reg_1p8v: regulator-1p8v {
65 compatible = "regulator-fixed";
66 regulator-name = "fixed-1.8V";
67 regulator-min-microvolt = <1800000>;
68 regulator-max-microvolt = <1800000>;
69 regulator-boot-on;
70 regulator-always-on;
73 reg_3p3v: regulator-3p3v {
74 compatible = "regulator-fixed";
75 regulator-name = "fixed-3.3V";
76 regulator-min-microvolt = <3300000>;
77 regulator-max-microvolt = <3300000>;
78 regulator-boot-on;
79 regulator-always-on;
83 compatible = "audio-graph-card";
85 label = "rcar-sound";
90 vbus0_usb2: regulator-vbus0-usb2 {
91 compatible = "regulator-fixed";
93 regulator-name = "USB20_VBUS0";
94 regulator-min-microvolt = <5000000>;
95 regulator-max-microvolt = <5000000>;
98 enable-active-high;
101 vccq_sdhi0: regulator-vccq-sdhi0 {
102 compatible = "regulator-gpio";
104 regulator-name = "SDHI0 VccQ";
105 regulator-min-microvolt = <1800000>;
106 regulator-max-microvolt = <3300000>;
109 gpios-states = <1>;
113 x302_clk: x302-clock {
114 compatible = "fixed-clock";
115 #clock-cells = <0>;
116 clock-frequency = <33000000>;
119 x304_clk: x304-clock {
120 compatible = "fixed-clock";
121 #clock-cells = <0>;
122 clock-frequency = <25000000>;
127 clock-frequency = <22579200>;
143 clock-frequency = <16666666>;
147 clock-frequency = <32768>;
151 usb1-reset-hog {
152 gpio-hog;
154 output-low;
155 line-name = "usb1-reset";
166 remote-endpoint = <&hdmi0_con>;
172 remote-endpoint = <&rsnd_endpoint>;
179 pinctrl-0 = <&hscif0_pins>;
180 pinctrl-names = "default";
182 uart-has-rtscts;
192 clock-frequency = <400000>;
195 versaclock5: clock-generator@6a {
198 #clock-cells = <1>;
200 clock-names = "xin";
202 idt,output-enable-active = <1>;
215 clock-frequency = <100000000>;
219 pinctrl-0 = <&scif_clk_pins>;
220 pinctrl-names = "default";
240 power-source = <3300>;
246 power-source = <1800>;
252 power-source = <1800>;
258 power-source = <1800>;
274 bias-pull-up;
285 timeout-sec = <60>;
290 pinctrl-0 = <&scif2_pins>;
291 pinctrl-names = "default";
297 clock-frequency = <14745600>;
301 pinctrl-0 = <&sdhi0_pins>;
302 pinctrl-1 = <&sdhi0_pins_uhs>;
303 pinctrl-names = "default", "state_uhs";
305 vmmc-supply = <®_3p3v>;
306 vqmmc-supply = <&vccq_sdhi0>;
307 cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
308 bus-width = <4>;
309 sd-uhs-sdr50;
310 sd-uhs-sdr104;
316 pinctrl-0 = <&sdhi2_pins>;
317 pinctrl-names = "default";
319 vmmc-supply = <&wlan_en_reg>;
320 bus-width = <4>;
321 non-removable;
322 cap-power-off-card;
323 keep-power-in-suspend;
325 #address-cells = <1>;
326 #size-cells = <0>;
330 interrupts-extended = <&gpio2 5 IRQ_TYPE_LEVEL_HIGH>;
335 pinctrl-0 = <&sdhi3_pins>;
336 pinctrl-1 = <&sdhi3_pins>;
337 pinctrl-names = "default", "state_uhs";
339 vmmc-supply = <®_3p3v>;
340 vqmmc-supply = <®_1p8v>;
341 bus-width = <8>;
342 mmc-hs200-1_8v;
343 no-sd;
344 no-sdio;
345 non-removable;
346 fixed-emmc-driver-type = <1>;
351 clock-frequency = <50000000>;
355 pinctrl-0 = <&usb0_pins>;
356 pinctrl-names = "default";
358 vbus-supply = <&vbus0_usb2>;
363 pinctrl-0 = <&usb1_pins>;
364 pinctrl-names = "default";
371 phy-names = "usb";
383 clock-frequency = <100000000>;
387 pinctrl-0 = <&usb30_pins>;
388 pinctrl-names = "default";