Lines Matching +full:composite +full:- +full:video +full:- +full:connector
1 // SPDX-License-Identifier: GPL-2.0
5 * Copyright (C) 2016-2018 Renesas Electronics Corp.
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h>
21 audio_clkout: audio-clkout {
24 * but needed to avoid cs2000/rcar_sound probe dead-lock
26 compatible = "fixed-clock";
27 #clock-cells = <0>;
28 clock-frequency = <12288000>;
32 compatible = "pwm-backlight";
35 brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
36 default-brightness-level = <10>;
38 power-supply = <®_12p0v>;
39 enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
44 stdout-path = "serial0:115200n8";
47 composite-in {
48 compatible = "composite-video-connector";
52 remote-endpoint = <&adv7180_in>;
57 hdmi-in {
58 compatible = "hdmi-connector";
63 remote-endpoint = <&adv7612_in>;
68 hdmi-out {
69 compatible = "hdmi-connector";
74 remote-endpoint = <&adv7511_out>;
80 compatible = "gpio-keys";
82 pinctrl-0 = <&keys_pins>;
83 pinctrl-names = "default";
85 key-1 {
88 label = "SW56-1";
89 wakeup-source;
90 debounce-interval = <20>;
92 key-2 {
95 label = "SW56-2";
96 wakeup-source;
97 debounce-interval = <20>;
99 key-3 {
102 label = "SW56-3";
103 wakeup-source;
104 debounce-interval = <20>;
106 key-4 {
109 label = "SW56-4";
110 wakeup-source;
111 debounce-interval = <20>;
115 lvds-decoder {
117 vcc-supply = <®_3p3v>;
120 #address-cells = <1>;
121 #size-cells = <0>;
126 remote-endpoint = <&lvds0_out>;
133 remote-endpoint = <&adv7511_in>;
145 reg_1p8v: regulator-1p8v {
146 compatible = "regulator-fixed";
147 regulator-name = "fixed-1.8V";
148 regulator-min-microvolt = <1800000>;
149 regulator-max-microvolt = <1800000>;
150 regulator-boot-on;
151 regulator-always-on;
154 reg_3p3v: regulator-3p3v {
155 compatible = "regulator-fixed";
156 regulator-name = "fixed-3.3V";
157 regulator-min-microvolt = <3300000>;
158 regulator-max-microvolt = <3300000>;
159 regulator-boot-on;
160 regulator-always-on;
163 reg_12p0v: regulator-12p0v {
164 compatible = "regulator-fixed";
165 regulator-name = "D12.0V";
166 regulator-min-microvolt = <12000000>;
167 regulator-max-microvolt = <12000000>;
168 regulator-boot-on;
169 regulator-always-on;
173 compatible = "audio-graph-card";
181 compatible = "vga-connector";
185 remote-endpoint = <&adv7123_out>;
190 vga-encoder {
194 #address-cells = <1>;
195 #size-cells = <0>;
200 remote-endpoint = <&du_out_rgb>;
206 remote-endpoint = <&vga_in>;
213 compatible = "fixed-clock";
214 #clock-cells = <0>;
215 clock-frequency = <74250000>;
219 compatible = "fixed-clock";
220 #clock-cells = <0>;
221 clock-frequency = <24576000>;
228 * and R-Car Sound uses AUDIO_CLKB.
232 * SW60 should be 1-2.
235 clock-frequency = <22579200>;
239 pinctrl-0 = <&avb0_pins>;
240 pinctrl-names = "default";
241 renesas,no-ether-link;
242 phy-handle = <&phy0>;
245 phy0: ethernet-phy@0 {
246 compatible = "ethernet-phy-id0022.1622",
247 "ethernet-phy-ieee802.3-c22";
248 rxc-skew-ps = <1500>;
250 interrupts-extended = <&gpio5 19 IRQ_TYPE_LEVEL_LOW>;
251 reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
256 * isn't supported on R-Car D3(e). Thus, limit speed to
259 max-speed = <100>;
264 pinctrl-0 = <&can0_pins>;
265 pinctrl-names = "default";
270 pinctrl-0 = <&can1_pins>;
271 pinctrl-names = "default";
276 pinctrl-0 = <&du_pins>;
277 pinctrl-names = "default";
283 clock-names = "du.0", "du.1", "dclkin.0";
288 remote-endpoint = <&adv7123_in>;
300 clock-frequency = <48000000>;
309 pinctrl-0 = <&i2c0_pins>;
310 pinctrl-names = "default";
314 compatible = "asahi-kasei,ak4613";
315 #sound-dai-cells = <0>;
319 asahi-kasei,in1-single-end;
320 asahi-kasei,in2-single-end;
321 asahi-kasei,out1-single-end;
322 asahi-kasei,out2-single-end;
323 asahi-kasei,out3-single-end;
324 asahi-kasei,out4-single-end;
325 asahi-kasei,out5-single-end;
326 asahi-kasei,out6-single-end;
330 remote-endpoint = <&rsnd_for_ak4613>;
335 composite-in@20 {
340 #address-cells = <1>;
341 #size-cells = <0>;
346 remote-endpoint = <&composite_con_in>;
354 * The VIN4 video input path is shared between
355 * CVBS and HDMI inputs through SW[49-53]
366 hdmi-encoder@39 {
369 reg-names = "main", "edid", "cec", "packet";
370 interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
372 avdd-supply = <®_1p8v>;
373 dvdd-supply = <®_1p8v>;
374 pvdd-supply = <®_1p8v>;
375 dvdd-3v-supply = <®_3p3v>;
376 bgvdd-supply = <®_1p8v>;
378 adi,input-depth = <8>;
379 adi,input-colorspace = "rgb";
380 adi,input-clock = "1x";
383 #address-cells = <1>;
384 #size-cells = <0>;
389 remote-endpoint = <&thc63lvd1024_out>;
396 remote-endpoint = <&hdmi_con_out>;
402 hdmi-decoder@4c {
405 default-input = <0>;
408 #address-cells = <1>;
409 #size-cells = <0>;
415 remote-endpoint = <&hdmi_con_in>;
423 * The VIN4 video input path is shared between
424 * CVBS and HDMI inputs through SW[49-53]
431 remote-endpoint = <&vin4_in>;
437 cs2000: clk-multiplier@4f {
438 #clock-cells = <0>;
439 compatible = "cirrus,cs2000-cp";
442 clock-names = "clk_in", "ref_clk";
444 assigned-clocks = <&cs2000>;
445 assigned-clock-rates = <24576000>; /* 1/1 divide */
456 pinctrl-0 = <&i2c1_pins>;
457 pinctrl-names = "default";
467 clock-names = "fck", "dclkin.0", "extal";
472 remote-endpoint = <&thc63lvd1024_in>;
489 clock-names = "fck", "dclkin.0", "extal";
530 bias-pull-up;
557 power-source = <1800>;
563 power-source = <1800>;
571 sound_clk_pins: sound-clk {
589 pinctrl-0 = <&pwm0_pins>;
590 pinctrl-names = "default";
596 pinctrl-0 = <&pwm1_pins>;
597 pinctrl-names = "default";
603 pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
604 pinctrl-names = "default";
607 #sound-dai-cells = <0>;
610 #clock-cells = <1>;
611 clock-frequency = <12288000 11289600>;
627 remote-endpoint = <&ak4613_endpoint>;
628 dai-format = "left_j";
629 bitclock-master = <&rsnd_for_ak4613>;
630 frame-master = <&rsnd_for_ak4613>;
639 pinctrl-0 = <&rpc_pins>;
640 pinctrl-names = "default";
645 compatible = "cypress,hyperflash", "cfi-flash";
649 compatible = "fixed-partitions";
650 #address-cells = <1>;
651 #size-cells = <1>;
655 read-only;
659 read-only;
663 read-only;
667 read-only;
671 read-only;
675 read-only;
691 timeout-sec = <60>;
696 pinctrl-0 = <&scif2_pins>;
697 pinctrl-names = "default";
703 /* used for on-board eMMC */
704 pinctrl-0 = <&sdhi2_pins>;
705 pinctrl-1 = <&sdhi2_pins_uhs>;
706 pinctrl-names = "default", "state_uhs";
708 vmmc-supply = <®_3p3v>;
709 vqmmc-supply = <®_1p8v>;
710 bus-width = <8>;
711 mmc-hs200-1_8v;
712 no-sd;
713 no-sdio;
714 non-removable;
719 shared-pin;
723 pinctrl-0 = <&usb0_pins>;
724 pinctrl-names = "default";
726 renesas,no-otg-pins;
731 pinctrl-0 = <&vin4_pins>;
732 pinctrl-names = "default";
739 pclk-sample = <0>;
740 hsync-active = <0>;
741 vsync-active = <0>;
742 remote-endpoint = <&adv7612_out>;