Lines Matching +full:ldo1 +full:- +full:en +full:- +full:gpios
1 // SPDX-License-Identifier: BSD-3-Clause
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/gpio-keys.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/leds/common.h>
13 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
16 #include "x1e80100-pmics.dtsi"
20 compatible = "dell,xps13-9345", "qcom,x1e80100";
21 chassis-type = "laptop";
27 gpio-keys {
28 compatible = "gpio-keys";
30 pinctrl-0 = <&hall_int_n_default>;
31 pinctrl-names = "default";
33 switch-lid {
34 gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
35 linux,input-type = <EV_SW>;
37 wakeup-source;
38 wakeup-event-action = <EV_ACT_DEASSERTED>;
43 compatible = "gpio-leds";
45 pinctrl-names = "default";
46 pinctrl-0 = <&cam_indicator_en>;
48 led-camera-indicator {
49 label = "white:camera-indicator";
52 gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
53 linux,default-trigger = "none";
54 default-state = "off";
56 panic-indicator;
60 pmic-glink {
61 compatible = "qcom,x1e80100-pmic-glink",
62 "qcom,sm8550-pmic-glink",
63 "qcom,pmic-glink";
64 orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
66 #address-cells = <1>;
67 #size-cells = <0>;
69 /* Right-side USB Type-C port */
71 compatible = "usb-c-connector";
73 power-role = "dual";
74 data-role = "dual";
77 #address-cells = <1>;
78 #size-cells = <0>;
84 remote-endpoint = <&usb_1_ss0_dwc3_hs>;
92 remote-endpoint = <&retimer_ss0_ss_out>;
100 remote-endpoint = <&retimer_ss0_con_sbu_out>;
106 /* Left-side USB Type-C port */
108 compatible = "usb-c-connector";
110 power-role = "dual";
111 data-role = "dual";
114 #address-cells = <1>;
115 #size-cells = <0>;
121 remote-endpoint = <&usb_1_ss1_dwc3_hs>;
129 remote-endpoint = <&retimer_ss1_ss_out>;
137 remote-endpoint = <&retimer_ss1_con_sbu_out>;
144 reserved-memory {
146 compatible = "shared-dma-pool";
149 linux,cma-default;
153 vreg_edp_3p3: regulator-edp-3p3 {
154 compatible = "regulator-fixed";
156 regulator-name = "VREG_EDP_3P3";
157 regulator-min-microvolt = <3300000>;
158 regulator-max-microvolt = <3300000>;
161 enable-active-high;
163 pinctrl-0 = <&edp_reg_en>;
164 pinctrl-names = "default";
166 regulator-boot-on;
169 vreg_nvme: regulator-nvme {
170 compatible = "regulator-fixed";
172 regulator-name = "VREG_NVME_3P3";
173 regulator-min-microvolt = <3300000>;
174 regulator-max-microvolt = <3300000>;
177 enable-active-high;
179 pinctrl-0 = <&nvme_reg_en>;
180 pinctrl-names = "default";
182 regulator-boot-on;
185 vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
186 compatible = "regulator-fixed";
188 regulator-name = "VREG_RTMR0_1P15";
189 regulator-min-microvolt = <1150000>;
190 regulator-max-microvolt = <1150000>;
193 enable-active-high;
195 pinctrl-0 = <&rtmr0_1p15_reg_en>;
196 pinctrl-names = "default";
198 regulator-boot-on;
201 vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
202 compatible = "regulator-fixed";
204 regulator-name = "VREG_RTMR0_1P8";
205 regulator-min-microvolt = <1800000>;
206 regulator-max-microvolt = <1800000>;
209 enable-active-high;
211 pinctrl-0 = <&rtmr0_1p8_reg_en>;
212 pinctrl-names = "default";
214 regulator-boot-on;
217 vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
218 compatible = "regulator-fixed";
220 regulator-name = "VREG_RTMR0_3P3";
221 regulator-min-microvolt = <3300000>;
222 regulator-max-microvolt = <3300000>;
225 enable-active-high;
227 pinctrl-0 = <&rtmr0_3p3_reg_en>;
228 pinctrl-names = "default";
230 regulator-boot-on;
233 vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
234 compatible = "regulator-fixed";
236 regulator-name = "VREG_RTMR1_1P15";
237 regulator-min-microvolt = <1150000>;
238 regulator-max-microvolt = <1150000>;
241 enable-active-high;
243 pinctrl-0 = <&rtmr1_1p15_reg_en>;
244 pinctrl-names = "default";
246 regulator-boot-on;
249 vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
250 compatible = "regulator-fixed";
252 regulator-name = "VREG_RTMR1_1P8";
253 regulator-min-microvolt = <1800000>;
254 regulator-max-microvolt = <1800000>;
257 enable-active-high;
259 pinctrl-0 = <&rtmr1_1p8_reg_en>;
260 pinctrl-names = "default";
262 regulator-boot-on;
265 vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
266 compatible = "regulator-fixed";
268 regulator-name = "VREG_RTMR1_3P3";
269 regulator-min-microvolt = <3300000>;
270 regulator-max-microvolt = <3300000>;
273 enable-active-high;
275 pinctrl-0 = <&rtmr1_3p3_reg_en>;
276 pinctrl-names = "default";
278 regulator-boot-on;
281 vreg_vph_pwr: regulator-vph-pwr {
282 compatible = "regulator-fixed";
284 regulator-name = "vph_pwr";
285 regulator-min-microvolt = <3700000>;
286 regulator-max-microvolt = <3700000>;
288 regulator-always-on;
289 regulator-boot-on;
294 regulators-0 {
295 compatible = "qcom,pm8550-rpmh-regulators";
296 qcom,pmic-id = "b";
297 vdd-bob1-supply = <&vreg_vph_pwr>;
298 vdd-bob2-supply = <&vreg_vph_pwr>;
299 vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
300 vdd-l2-l13-l14-supply = <&vreg_bob1>;
301 vdd-l5-l16-supply = <&vreg_bob1>;
302 vdd-l6-l7-supply = <&vreg_bob2>;
303 vdd-l8-l9-supply = <&vreg_bob1>;
304 vdd-l12-supply = <&vreg_s5j_1p2>;
305 vdd-l15-supply = <&vreg_s4c_1p8>;
306 vdd-l17-supply = <&vreg_bob2>;
309 regulator-name = "vreg_bob1";
310 regulator-min-microvolt = <3008000>;
311 regulator-max-microvolt = <3960000>;
312 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
316 regulator-name = "vreg_bob2";
317 regulator-min-microvolt = <2504000>;
318 regulator-max-microvolt = <3008000>;
319 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
323 regulator-name = "vreg_l2b_3p0";
324 regulator-min-microvolt = <3072000>;
325 regulator-max-microvolt = <3072000>;
326 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
330 regulator-name = "vreg_l4b_1p8";
331 regulator-min-microvolt = <1800000>;
332 regulator-max-microvolt = <1800000>;
333 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
337 regulator-name = "vreg_l6b_1p8";
338 regulator-min-microvolt = <1800000>;
339 regulator-max-microvolt = <2960000>;
340 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
344 regulator-name = "vreg_l8b_3p0";
345 regulator-min-microvolt = <3072000>;
346 regulator-max-microvolt = <3072000>;
347 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
351 regulator-name = "vreg_l9b_2p9";
352 regulator-min-microvolt = <2960000>;
353 regulator-max-microvolt = <2960000>;
354 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
358 regulator-name = "vreg_l12b_1p2";
359 regulator-min-microvolt = <1200000>;
360 regulator-max-microvolt = <1200000>;
361 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
365 regulator-name = "vreg_l13b_3p0";
366 regulator-min-microvolt = <3072000>;
367 regulator-max-microvolt = <3072000>;
368 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
372 regulator-name = "vreg_l14b_3p0";
373 regulator-min-microvolt = <3072000>;
374 regulator-max-microvolt = <3072000>;
375 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
379 regulator-name = "vreg_l15b_1p8";
380 regulator-min-microvolt = <1800000>;
381 regulator-max-microvolt = <1800000>;
382 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
386 regulator-name = "vreg_l17b_2p5";
387 regulator-min-microvolt = <2504000>;
388 regulator-max-microvolt = <2504000>;
389 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
393 regulators-1 {
394 compatible = "qcom,pm8550ve-rpmh-regulators";
395 qcom,pmic-id = "c";
396 vdd-l1-supply = <&vreg_s5j_1p2>;
397 vdd-l2-supply = <&vreg_s1f_0p7>;
398 vdd-l3-supply = <&vreg_s1f_0p7>;
401 regulator-name = "vreg_s4c_1p8";
402 regulator-min-microvolt = <1856000>;
403 regulator-max-microvolt = <2000000>;
404 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
407 vreg_l1c_1p2: ldo1 {
408 regulator-name = "vreg_l1c_1p2";
409 regulator-min-microvolt = <1200000>;
410 regulator-max-microvolt = <1200000>;
411 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
415 regulator-name = "vreg_l2c_0p8";
416 regulator-min-microvolt = <880000>;
417 regulator-max-microvolt = <880000>;
418 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
422 regulator-name = "vreg_l3c_0p9";
423 regulator-min-microvolt = <920000>;
424 regulator-max-microvolt = <920000>;
425 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
429 regulators-2 {
430 compatible = "qcom,pmc8380-rpmh-regulators";
431 qcom,pmic-id = "d";
432 vdd-l1-supply = <&vreg_s1f_0p7>;
433 vdd-l2-supply = <&vreg_s1f_0p7>;
434 vdd-l3-supply = <&vreg_s4c_1p8>;
435 vdd-s1-supply = <&vreg_vph_pwr>;
437 vreg_l1d_0p8: ldo1 {
438 regulator-name = "vreg_l1d_0p8";
439 regulator-min-microvolt = <880000>;
440 regulator-max-microvolt = <880000>;
441 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
445 regulator-name = "vreg_l2d_0p9";
446 regulator-min-microvolt = <912000>;
447 regulator-max-microvolt = <912000>;
448 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
452 regulator-name = "vreg_l3d_1p8";
453 regulator-min-microvolt = <1800000>;
454 regulator-max-microvolt = <1800000>;
455 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
459 regulators-3 {
460 compatible = "qcom,pmc8380-rpmh-regulators";
461 qcom,pmic-id = "e";
462 vdd-l2-supply = <&vreg_s1f_0p7>;
463 vdd-l3-supply = <&vreg_s5j_1p2>;
466 regulator-name = "vreg_l2e_0p8";
467 regulator-min-microvolt = <880000>;
468 regulator-max-microvolt = <880000>;
469 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
473 regulator-name = "vreg_l3e_1p2";
474 regulator-min-microvolt = <1200000>;
475 regulator-max-microvolt = <1200000>;
476 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
480 regulators-4 {
481 compatible = "qcom,pmc8380-rpmh-regulators";
482 qcom,pmic-id = "f";
483 vdd-l1-supply = <&vreg_s5j_1p2>;
484 vdd-l2-supply = <&vreg_s5j_1p2>;
485 vdd-l3-supply = <&vreg_s5j_1p2>;
486 vdd-s1-supply = <&vreg_vph_pwr>;
489 regulator-name = "vreg_s1f_0p7";
490 regulator-min-microvolt = <700000>;
491 regulator-max-microvolt = <1100000>;
492 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
496 regulators-6 {
497 compatible = "qcom,pm8550ve-rpmh-regulators";
498 qcom,pmic-id = "i";
499 vdd-l1-supply = <&vreg_s4c_1p8>;
500 vdd-l2-supply = <&vreg_s5j_1p2>;
501 vdd-l3-supply = <&vreg_s1f_0p7>;
502 vdd-s1-supply = <&vreg_vph_pwr>;
503 vdd-s2-supply = <&vreg_vph_pwr>;
506 regulator-name = "vreg_s1i_0p9";
507 regulator-min-microvolt = <900000>;
508 regulator-max-microvolt = <920000>;
509 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
513 regulator-name = "vreg_s2i_1p0";
514 regulator-min-microvolt = <1000000>;
515 regulator-max-microvolt = <1100000>;
516 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
519 vreg_l1i_1p8: ldo1 {
520 regulator-name = "vreg_l1i_1p8";
521 regulator-min-microvolt = <1800000>;
522 regulator-max-microvolt = <1800000>;
523 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
527 regulator-name = "vreg_l2i_1p2";
528 regulator-min-microvolt = <1200000>;
529 regulator-max-microvolt = <1200000>;
530 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
534 regulator-name = "vreg_l3i_0p8";
535 regulator-min-microvolt = <880000>;
536 regulator-max-microvolt = <880000>;
537 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
541 regulators-7 {
542 compatible = "qcom,pm8550ve-rpmh-regulators";
543 qcom,pmic-id = "j";
544 vdd-l1-supply = <&vreg_s1f_0p7>;
545 vdd-l2-supply = <&vreg_s5j_1p2>;
546 vdd-l3-supply = <&vreg_s1f_0p7>;
547 vdd-s5-supply = <&vreg_vph_pwr>;
550 regulator-name = "vreg_s5j_1p2";
551 regulator-min-microvolt = <1256000>;
552 regulator-max-microvolt = <1304000>;
553 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
556 vreg_l1j_0p9: ldo1 {
557 regulator-name = "vreg_l1j_0p9";
558 regulator-min-microvolt = <912000>;
559 regulator-max-microvolt = <912000>;
560 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
564 regulator-name = "vreg_l2j_1p2";
565 regulator-min-microvolt = <1256000>;
566 regulator-max-microvolt = <1256000>;
567 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
571 regulator-name = "vreg_l3j_0p8";
572 regulator-min-microvolt = <880000>;
573 regulator-max-microvolt = <880000>;
574 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
582 zap-shader {
583 firmware-name = "qcom/x1e80100/dell/xps13-9345/qcdxkmsuc8380.mbn";
588 clock-frequency = <400000>;
592 compatible = "hid-over-i2c";
595 hid-descr-addr = <0x20>;
596 interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
598 pinctrl-0 = <&kybd_default>;
599 pinctrl-names = "default";
601 wakeup-source;
606 clock-frequency = <400000>;
609 /* Right-side USB Type-C port */
610 typec-mux@8 {
615 clock-names = "xo";
617 vdd-supply = <&vreg_rtmr0_1p15>;
618 vdd33-supply = <&vreg_rtmr0_3p3>;
619 vdd33-cap-supply = <&vreg_rtmr0_3p3>;
620 vddar-supply = <&vreg_rtmr0_1p15>;
621 vddat-supply = <&vreg_rtmr0_1p15>;
622 vddio-supply = <&vreg_rtmr0_1p8>;
624 reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
626 pinctrl-0 = <&rtmr0_default>;
627 pinctrl-names = "default";
629 retimer-switch;
630 orientation-switch;
633 #address-cells = <1>;
634 #size-cells = <0>;
640 remote-endpoint = <&pmic_glink_ss0_ss_in>;
648 remote-endpoint = <&usb_1_ss0_qmpphy_out>;
656 remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
664 clock-frequency = <100000>;
670 clock-frequency = <400000>;
673 /* Left-side USB Type-C port */
674 typec-mux@8 {
679 clock-names = "xo";
681 vdd-supply = <&vreg_rtmr1_1p15>;
682 vdd33-supply = <&vreg_rtmr1_3p3>;
683 vdd33-cap-supply = <&vreg_rtmr1_3p3>;
684 vddar-supply = <&vreg_rtmr1_1p15>;
685 vddat-supply = <&vreg_rtmr1_1p15>;
686 vddio-supply = <&vreg_rtmr1_1p8>;
688 reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
690 pinctrl-0 = <&rtmr1_default>;
691 pinctrl-names = "default";
693 retimer-switch;
694 orientation-switch;
697 #address-cells = <1>;
698 #size-cells = <0>;
704 remote-endpoint = <&pmic_glink_ss1_ss_in>;
712 remote-endpoint = <&usb_1_ss1_qmpphy_out>;
720 remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
729 clock-frequency = <400000>;
734 compatible = "hid-over-i2c";
737 hid-descr-addr = <0x1>;
738 interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
740 pinctrl-0 = <&ts0_default>;
741 pinctrl-names = "default";
746 clock-frequency = <400000>;
752 clock-frequency = <400000>;
756 compatible = "hid-over-i2c";
759 hid-descr-addr = <0x20>;
760 interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
762 pinctrl-0 = <&tpad_default>;
763 pinctrl-names = "default";
765 wakeup-source;
774 /delete-property/ #sound-dai-cells;
778 aux-bus {
780 compatible = "edp-panel";
781 enable-gpios = <&tlmm 74 GPIO_ACTIVE_HIGH>;
782 power-supply = <&vreg_edp_3p3>;
784 pinctrl-0 = <&edp_bl_en>;
785 pinctrl-names = "default";
789 remote-endpoint = <&mdss_dp3_out>;
800 data-lanes = <0 1 2 3>;
801 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
803 remote-endpoint = <&edp_panel_in>;
810 vdda-phy-supply = <&vreg_l3j_0p8>;
811 vdda-pll-supply = <&vreg_l2j_1p2>;
817 perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
818 wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
820 pinctrl-0 = <&pcie4_default>;
821 pinctrl-names = "default";
827 vdda-phy-supply = <&vreg_l3i_0p8>;
828 vdda-pll-supply = <&vreg_l3e_1p2>;
834 perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
835 wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
837 vddpe-3v3-supply = <&vreg_nvme>;
839 pinctrl-0 = <&pcie6a_default>;
840 pinctrl-names = "default";
846 vdda-phy-supply = <&vreg_l1d_0p8>;
847 vdda-pll-supply = <&vreg_l2j_1p2>;
853 rtmr0_default: rtmr0-reset-n-active-state {
856 power-source = <1>; /* 1.8V */
859 rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state {
862 power-source = <1>; /* 1.8V */
867 rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state {
870 power-source = <1>; /* 1.8V */
875 rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state {
878 power-source = <1>; /* 1.8V */
895 firmware-name = "qcom/x1e80100/dell/xps13-9345/qcadsp8380.mbn",
896 "qcom/x1e80100/dell/xps13-9345/adsp_dtbs.elf";
902 firmware-name = "qcom/x1e80100/dell/xps13-9345/qccdsp8380.mbn",
903 "qcom/x1e80100/dell/xps13-9345/cdsp_dtbs.elf";
913 vdd18-supply = <&vreg_l3d_1p8>;
914 vdd3-supply = <&vreg_l2b_3p0>;
922 vdd18-supply = <&vreg_l3d_1p8>;
923 vdd3-supply = <&vreg_l14b_3p0>;
927 gpio-reserved-ranges = <44 4>, /* SPI11 (TPM) */
931 cam_indicator_en: cam-indicator-en-state {
934 drive-strength = <2>;
935 bias-disable;
938 edp_bl_en: edp-bl-en-state {
941 drive-strength = <2>;
942 bias-disable;
945 edp_reg_en: edp-reg-en-state {
948 drive-strength = <16>;
949 bias-disable;
952 hall_int_n_default: hall-int-n-state {
956 bias-disable;
959 kybd_default: kybd-default-state {
962 bias-pull-up;
965 nvme_reg_en: nvme-reg-en-state {
968 drive-strength = <2>;
969 bias-disable;
972 pcie4_default: pcie4-default-state {
973 clkreq-n-pins {
976 drive-strength = <2>;
977 bias-pull-up;
980 perst-n-pins {
983 drive-strength = <2>;
984 bias-disable;
987 wake-n-pins {
990 drive-strength = <2>;
991 bias-pull-up;
995 pcie6a_default: pcie6a-default-state {
996 clkreq-n-pins {
999 drive-strength = <2>;
1000 bias-pull-up;
1003 perst-n-pins {
1006 drive-strength = <2>;
1007 bias-disable;
1010 wake-n-pins {
1013 drive-strength = <2>;
1014 bias-pull-up;
1018 rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state {
1021 drive-strength = <2>;
1022 bias-disable;
1025 rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state {
1028 drive-strength = <2>;
1029 bias-disable;
1032 rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state {
1035 drive-strength = <2>;
1036 bias-disable;
1039 rtmr1_default: rtmr1-reset-n-active-state {
1042 drive-strength = <2>;
1043 bias-disable;
1046 tpad_default: tpad-default-state {
1047 disable-pins {
1050 output-high;
1053 int-n-pins {
1056 bias-pull-up;
1059 reset-n-pins {
1062 bias-disable;
1066 ts0_default: ts0-default-state {
1067 disable-pins {
1070 output-high;
1073 int-n-pins {
1076 bias-pull-up;
1079 reset-n-pins {
1080 /* Technically should be High-Z input */
1083 output-low;
1084 drive-strength = <2>;
1090 compatible = "qcom,geni-debug-uart";
1095 vdd-supply = <&vreg_l3j_0p8>;
1096 vdda12-supply = <&vreg_l2j_1p2>;
1104 vdda-phy-supply = <&vreg_l2j_1p2>;
1105 vdda-pll-supply = <&vreg_l1j_0p9>;
1119 remote-endpoint = <&pmic_glink_ss0_hs_in>;
1123 remote-endpoint = <&retimer_ss0_ss_in>;
1127 vdd-supply = <&vreg_l3j_0p8>;
1128 vdda12-supply = <&vreg_l2j_1p2>;
1136 vdda-phy-supply = <&vreg_l2j_1p2>;
1137 vdda-pll-supply = <&vreg_l2d_0p9>;
1151 remote-endpoint = <&pmic_glink_ss1_hs_in>;
1155 remote-endpoint = <&retimer_ss1_ss_in>;