Lines Matching +full:imx8mp +full:- +full:reset
1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
6 #include <dt-bindings/gpio/gpio.h>
7 #include "imx8mp-kontron-osm-s.dtsi"
11 compatible = "kontron,imx8mp-smarc", "kontron,imx8mp-osm-s", "fsl,imx8mp";
14 compatible = "gpio-leds";
19 linux,default-trigger = "heartbeat";
28 compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
30 spi-max-frequency = <18500000>;
34 &eqos { /* Second ethernet (OSM-S ETH_B) */
35 pinctrl-names = "default";
36 pinctrl-0 = <&pinctrl_eqos_rgmii>;
37 phy-mode = "rgmii-id";
38 phy-handle = <ðphy1>;
41 compatible = "snps,dwmac-mdio";
42 #address-cells = <1>;
43 #size-cells = <0>;
45 ethphy1: ethernet-phy@1 {
46 compatible = "ethernet-phy-id4f51.e91b";
48 pinctrl-0 = <&pinctrl_ethphy1>;
49 pinctrl-names = "default";
50 reset-assert-us = <10000>;
51 reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
56 &fec { /* First ethernet (OSM-S ETH_A) */
57 pinctrl-names = "default";
58 pinctrl-0 = <&pinctrl_enet_rgmii>;
59 phy-connection-type = "rgmii-id";
60 phy-handle = <ðphy0>;
63 #address-cells = <1>;
64 #size-cells = <0>;
66 ethphy0: ethernet-phy@1 {
67 compatible = "ethernet-phy-id4f51.e91b";
69 pinctrl-0 = <&pinctrl_ethphy0>;
70 pinctrl-names = "default";
71 reset-assert-us = <10000>;
72 reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
79 * GPIO_A_2 -> GPIO0
80 * GPIO_A_3 -> GPIO1
81 * GPIO_A_4 -> GPIO2
82 * GPIO_A_5 -> GPIO3
83 * USB_B_EN -> n.a.
84 * USB_B_ID -> n.a.
85 * USB_B_OC -> n.a.
88 gpio-line-names = "GPIO_A_0", "GPIO_A_1", "", "",
100 * SDIO_A_CD -> SDIO_CD
101 * SDIO_A_CLK -> SDIO_CK
102 * SDIO_A_CMD -> SDIO_CMD
103 * SDIO_A_D0 -> SDIO_D0
104 * SDIO_A_D1 -> SDIO_D1
105 * SDIO_A_D2 -> SDIO_D2
106 * SDIO_A_D3 -> SDIO_D3
107 * SDIO_A_PWR_EN -> SDIO_PWR_EN
108 * SDIO_A_WP -> SDIO_WP
111 gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "",
119 * PCIE_CLKREQ -> PCIE_A_CKREQ
120 * PCIE_A_PERST -> PCIE_A_RST
121 * SDIO_B_D5 -> n.a.
122 * SDIO_B_D6 -> n.a.
123 * SDIO_B_D7 -> n.a.
124 * SPI_A_WP -> n.a.
125 * SPI_A_HOLD -> n.a.
126 * UART_B_RTS -> SER2_RTS
127 * UART_B_CTS -> SER2_CTS
128 * SDIO_B_D0 -> GPIO8
129 * SDIO_B_D1 -> GPIO9
130 * SDIO_B_D2 -> GPIO10
131 * SDIO_B_D3 -> GPIO11
132 * SDIO_B_WP -> n.a.
133 * SDIO_B_D4 -> n.a.
134 * PCIE_SM_ALERT -> SMB_ALERT
135 * SDIO_B_CLK -> GPIO6
136 * SDIO_B_CMD -> GPIO7
137 * GPIO_B_0 -> LCD0_BKLT_EN
138 * GPIO_B_1 -> LCD1_BKLT_EN
139 * BOOT_SEL0 -> BOOT_SEL2
140 * SDIO_B_CD -> n.a.
141 * SDIO_B_PWR_EN -> n.a.
142 * HDMI_CEC -> n.a.
143 * SDIO_B_PWR_EN -> n.a.
146 pinctrl-0 = <&pinctrl_gpio3>, <&pinctrl_gpio3_smarc>;
147 gpio-line-names = "PCIE_WAKE", "PCIE_A_CKREQ", "PCIE_A_RST", "",
159 * GPIO_B_5 -> n.a.
160 * GPIO_B_6 -> n.a.
161 * GPIO_B_7 -> n.a.
162 * GPIO_C_0 -> LED
163 * GPIO_B_3 -> ETH2_INT
164 * GPIO_B_4 -> USB_HUB_RST
165 * GPIO_B_2 -> ETH1_INT
166 * GPIO_A_6 -> GPIO4
167 * CAN_A_TX -> CAN0_TX
168 * UART_A_CTS -> SER0_CTS
169 * UART_A_RTS -> SER0_RTS
170 * CAN_A_RX -> CAN0_RX
171 * CAN_B_TX -> CAN1_TX
172 * CAN_B_RX -> CAN1_RX
173 * GPIO_A_7 -> TEST
174 * I2S_A_DATA_IN -> I2S0_SDIN
175 * I2S_LRCLK -> I2S0_LRCK
178 gpio-line-names = "", "", "", "LED",
190 * I2S_BITCLK -> I2S0_CK
191 * I2S_A_DATA_OUT -> I2S0_SDOUT
192 * I2S_MCLK -> AUDIO_MCK
193 * PWM_2 -> GPIO5
194 * PWM_1 -> LCD1_BKLT_PWM
195 * PWM_0 -> LCD0_BKLT_PWM
196 * SPI_A_SCK -> SPI0_CK
197 * SPI_A_SDO -> SPI0_DO
198 * SPI_A_SDI -> SPI0_DIN
199 * SPI_A_CS0 -> SPI0_CS0
200 * SPI_B_SCK -> ESPI_CK
201 * SPI_B_SDO -> ESPI_IO_0
202 * SPI_B_SDI -> ESPI_IO_1
203 * SPI_B_CS0 -> ESPI_CS0
204 * I2C_A_SCL -> I2C_PM_CK
205 * I2C_A_SDA -> I2C_PM_DAT
206 * I2C_B_SCL -> I2C_GP_CK
207 * I2C_B_SDA -> I2C_GP_DAT
208 * PCIE_SMCLK -> HDMI_CTRL_CK
209 * PCIE_SMDAT -> HDMI_CTRL_DAT
210 * I2C_CAM_SCL -> I2C_CAM1_CK
211 * I2C_CAM_SDA -> I2C_CAM1_DAT
212 * UART_A_RX -> SER0_RX
213 * UART_A_TX -> SER0_TX
214 * UART_C_RX -> SER3_RX
215 * UART_C_TX -> SER3_TX
216 * UART_CON_RX -> SER1_RX
217 * UART_CON_TX -> SER1_TX
218 * UART_B_RX -> SER2_RX
219 * UART_B_TX -> SER2_TX
222 pinctrl-names = "default";
223 pinctrl-0 = <&pinctrl_gpio5_smarc>;
224 gpio-line-names = "I2S0_CK", "I2S0_SDOUT", "AUDIO_MCK", "GPIO5",
236 #address-cells = <1>;
237 #size-cells = <0>;
239 usb-hub@1 {
242 reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
247 fsl,disable-port-power-control;
248 fsl,permanently-attached;