Lines Matching +full:sd +full:- +full:hs
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Copyright (C) 2023-2024 Marek Vasut <[email protected]>
6 * DHCM-iMX8ML8-C160-R204-F1638-SPI16-E-SD-RTC-T-RGB-I-01D2
7 * DHCOM PCB number: 660-200 or newer
8 * PicoITX PCB number: 487-600 or newer
11 /dts-v1/;
13 #include <dt-bindings/leds/common.h>
14 #include "imx8mp-dhcom-som.dtsi"
18 compatible = "dh,imx8mp-dhcom-picoitx", "dh,imx8mp-dhcom-som",
22 stdout-path = &uart1;
26 compatible = "gpio-leds";
28 led-0 {
30 default-state = "off";
33 pinctrl-0 = <&pinctrl_dhcom_i>;
34 pinctrl-names = "default";
40 pinctrl-0 = <&pinctrl_eqos_rmii>;
41 phy-handle = <ðphy0f>;
42 phy-mode = "rmii";
44 assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
47 assigned-clock-rates = <0>, <100000000>, <50000000>;
67 gpio-line-names =
68 "DHCOM-G", "", "", "",
69 "", "DHCOM-I", "PicoITX-HW0", "PicoITX-HW2",
70 "DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "",
76 gpio-line-names =
78 "", "", "", "PicoITX-HW1", "", "", "", "",
79 "", "", "", "", "DHCOM-INT", "", "", "",
84 gpio-line-names =
87 "", "", "", "SOM-HW1", "", "", "", "",
88 "", "", "", "PicoITX-Out2", "", "", "", "";
92 gpio-line-names =
93 "", "", "PicoITX-In2", "", "", "", "", "",
96 "", "", "PicoITX-In1", "PicoITX-Out1",
100 /* No HS connector on this SoM variant, so no HDMI, PCIe and only USB HS. */
150 fsl,over-current-active-low;
155 maximum-speed = "high-speed";
169 pinctrl-0 = <&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c