Lines Matching +full:num +full:- +full:interpolated +full:- +full:steps

1 // SPDX-License-Identifier: GPL-2.0
6 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
10 #include "imx8mm-pinfunc.h"
13 	compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
16 		compatible = "pwm-backlight";
18 		brightness-levels = <0 100>;
19 		num-interpolated-steps = <100>;
20 		default-brightness-level = <100>;
24 		compatible = "jenson,bl-jt60050-01a", "panel-lvds";
25 		pinctrl-names = "default";
26 		pinctrl-0 = <&pinctrl_panel>;
28 		data-mapping = "vesa-24";
29 		enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
30 		height-mm = <86>;
31 		width-mm = <154>;
33 		panel-timing {
34 			clock-frequency = <51200000>;
37 			hsync-len = <1>;
38 			hfront-porch = <160>;
39 			hback-porch = <160>;
40 			vsync-len = <1>;
41 			vfront-porch = <12>;
42 			vback-porch = <23>;
47 				remote-endpoint = <&bridge_out_panel>;
62 	remote-endpoint = <&bridge_in_dsi_lvds>;
66 	pinctrl-names = "default";
67 	pinctrl-0 = <&pinctrl_gpio3>;
69 	panel-rst-hog {
70 		gpio-hog;
72 		output-high;
73 		line-name = "panel-reset";
76 	panel-stby-hog {
77 		gpio-hog;
79 		output-high;
80 		line-name = "panel-standby";
83 	panel-hinv-hog {
84 		gpio-hog;
86 		output-high;
87 		line-name = "panel-horizontal-invert";
90 	panel-vinv-hog {
91 		gpio-hog;
93 		output-low;
94 		line-name = "panel-vertical-invert";
103 	clock-frequency = <400000>;
104 	pinctrl-names = "default";
105 	pinctrl-0 = <&pinctrl_i2c2>;
106 	#address-cells = <1>;
107 	#size-cells = <0>;
113 		pinctrl-names = "default";
114 		pinctrl-0 = <&pinctrl_touch>;
115 		interrupt-parent = <&gpio3>;
117 		reset-gpios = <&gpio3 23 0>;
118 		irq-gpios = <&gpio3 22 0>;
126 		#address-cells = <1>;
127 		#size-cells = <0>;
133 				remote-endpoint = <&mipi_dsi_out>;
134 				data-lanes = <1 2>;
142 				remote-endpoint = <&panel_out_bridge>;
149 	pinctrl-names = "default";
150 	pinctrl-0 = <&pinctrl_pwm1>;