Lines Matching +full:self +full:- +full:working +full:- +full:mode
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 /dts-v1/;
6 #include "sun50i-h6.dtsi"
7 #include "sun50i-h6-cpu-opp.dtsi"
8 #include "sun50i-h6-gpu-opp.dtsi"
10 #include <dt-bindings/gpio/gpio.h>
14 compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
22 stdout-path = "serial0:115200n8";
26 compatible = "hdmi-connector";
28 ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
32 remote-endpoint = <&hdmi_out_con>;
37 ext_osc32k: ext-osc32k-clk {
38 #clock-cells = <0>;
39 compatible = "fixed-clock";
40 clock-frequency = <32768>;
41 clock-output-names = "ext_osc32k";
45 compatible = "gpio-leds";
50 default-state = "on";
56 compatible = "regulator-fixed";
57 regulator-name = "vcc-5v";
58 regulator-min-microvolt = <5000000>;
59 regulator-max-microvolt = <5000000>;
60 regulator-always-on;
63 sound-spdif {
64 compatible = "simple-audio-card";
65 simple-audio-card,name = "sun50i-h6-spdif";
67 simple-audio-card,cpu {
68 sound-dai = <&spdif>;
71 simple-audio-card,codec {
72 sound-dai = <&spdif_out>;
76 spdif_out: spdif-out {
77 #sound-dai-cells = <0>;
78 compatible = "linux,spdif-dit";
83 cpu-supply = <®_dcdca>;
99 pinctrl-names = "default";
100 pinctrl-0 = <&ext_rgmii_pins>;
101 phy-mode = "rgmii-id";
102 phy-handle = <&ext_rgmii_phy>;
103 phy-supply = <®_aldo2>;
108 mali-supply = <®_dcdcc>;
118 remote-endpoint = <&hdmi_con_in>;
123 ext_rgmii_phy: ethernet-phy@1 {
124 compatible = "ethernet-phy-ieee802.3-c22";
130 vmmc-supply = <®_cldo1>;
131 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
132 disable-wp;
133 bus-width = <4>;
138 vmmc-supply = <®_cldo1>;
139 vqmmc-supply = <®_bldo2>;
140 non-removable;
141 cap-mmc-hw-reset;
142 bus-width = <8>;
151 vcc-pd-supply = <®_cldo1>;
152 vcc-pg-supply = <®_aldo1>;
156 linux,rc-map-name = "rc-beelink-gs1";
166 * vcc-pl-supply = <®_aldo1>;
168 vcc-pm-supply = <®_aldo1>;
175 compatible = "x-powers,axp805", "x-powers,axp806";
177 interrupt-parent = <&r_intc>;
179 interrupt-controller;
180 #interrupt-cells = <1>;
181 x-powers,self-working-mode;
182 vina-supply = <®_vcc5v>;
183 vinb-supply = <®_vcc5v>;
184 vinc-supply = <®_vcc5v>;
185 vind-supply = <®_vcc5v>;
186 vine-supply = <®_vcc5v>;
187 aldoin-supply = <®_vcc5v>;
188 bldoin-supply = <®_vcc5v>;
189 cldoin-supply = <®_vcc5v>;
193 regulator-always-on;
194 regulator-min-microvolt = <3300000>;
195 regulator-max-microvolt = <3300000>;
196 regulator-name = "vcc-pl";
200 regulator-min-microvolt = <3300000>;
201 regulator-max-microvolt = <3300000>;
202 regulator-name = "vcc-ac200";
203 regulator-enable-ramp-delay = <100000>;
207 regulator-always-on;
208 regulator-min-microvolt = <3300000>;
209 regulator-max-microvolt = <3300000>;
210 regulator-name = "vcc25-dram";
214 regulator-always-on;
215 regulator-min-microvolt = <1800000>;
216 regulator-max-microvolt = <1800000>;
217 regulator-name = "vcc-bias-pll";
221 regulator-always-on;
222 regulator-min-microvolt = <1800000>;
223 regulator-max-microvolt = <1800000>;
224 regulator-name = "vcc-efuse-pcie-hdmi-io";
228 regulator-always-on;
229 regulator-min-microvolt = <1800000>;
230 regulator-max-microvolt = <1800000>;
231 regulator-name = "vcc-dcxoio";
239 regulator-always-on;
240 regulator-min-microvolt = <3300000>;
241 regulator-max-microvolt = <3300000>;
242 regulator-name = "vcc-3v3";
246 regulator-min-microvolt = <3300000>;
247 regulator-max-microvolt = <3300000>;
248 regulator-name = "vcc-wifi-1";
252 regulator-min-microvolt = <3300000>;
253 regulator-max-microvolt = <3300000>;
254 regulator-name = "vcc-wifi-2";
258 regulator-always-on;
259 regulator-min-microvolt = <810000>;
260 regulator-max-microvolt = <1160000>;
261 regulator-ramp-delay = <2500>;
262 regulator-name = "vdd-cpu";
266 regulator-enable-ramp-delay = <32000>;
267 regulator-min-microvolt = <810000>;
268 regulator-max-microvolt = <1080000>;
269 regulator-ramp-delay = <2500>;
270 regulator-name = "vdd-gpu";
274 regulator-always-on;
275 regulator-min-microvolt = <960000>;
276 regulator-max-microvolt = <960000>;
277 regulator-name = "vdd-sys";
281 regulator-always-on;
282 regulator-min-microvolt = <1200000>;
283 regulator-max-microvolt = <1200000>;
284 regulator-name = "vcc-dram";
295 pinctrl-names = "default";
296 pinctrl-0 = <&spdif_tx_pin>;
301 pinctrl-names = "default";
302 pinctrl-0 = <&uart0_ph_pins>;
312 usb0_vbus-supply = <®_vcc5v>;