Lines Matching +full:neg +full:- +full:edge
1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
3 * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
7 /dts-v1/;
11 #include "stm32mp15-pinctrl.dtsi"
12 #include "stm32mp15xxac-pinctrl.dtsi"
13 #include "stm32mp15xx-dkx.dtsi"
16 model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
17 compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
25 stdout-path = "serial0:115200n8";
28 wifi_pwrseq: wifi-pwrseq {
29 compatible = "mmc-pwrseq-simple";
30 reset-gpios = <&gpioh 4 GPIO_ACTIVE_LOW>;
39 #address-cells = <1>;
40 #size-cells = <0>;
46 reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
47 power-supply = <&v3v3>;
52 remote-endpoint = <&dsi_out>;
59 remote-endpoint = <<dc_ep1_out>;
63 remote-endpoint = <&panel_in>;
71 interrupt-parent = <&gpiof>;
72 touchscreen-size-x = <480>;
73 touchscreen-size-y = <800>;
82 #address-cells = <1>;
83 #size-cells = <0>;
87 remote-endpoint = <&dsi_in>;
93 pinctrl-names = "default";
94 pinctrl-0 = <&rtc_rsvd_pins_a>;
96 rtc_lsco_pins_a: rtc-lsco-0 {
104 pinctrl-names = "default", "opendrain", "sleep";
105 pinctrl-0 = <&sdmmc2_b4_pins_a>;
106 pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
107 pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
108 non-removable;
109 cap-sdio-irq;
110 st,neg-edge;
111 bus-width = <4>;
112 vmmc-supply = <&v3v3>;
113 mmc-pwrseq = <&wifi_pwrseq>;
114 #address-cells = <1>;
115 #size-cells = <0>;
120 compatible = "brcm,bcm4329-fmac";
121 pinctrl-names = "default";
122 pinctrl-0 = <&rtc_lsco_pins_a>;
128 pinctrl-names = "default", "sleep", "idle";
129 pinctrl-0 = <&usart2_pins_c>;
130 pinctrl-1 = <&usart2_sleep_pins_c>;
131 pinctrl-2 = <&usart2_idle_pins_c>;
132 uart-has-rtscts;
136 shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
137 compatible = "brcm,bcm43438-bt";
138 max-speed = <3000000>;
139 vbat-supply = <&v3v3>;
140 vddio-supply = <&v3v3>;