Lines Matching +full:no +full:- +full:ether +full:- +full:link
1 // SPDX-License-Identifier: GPL-2.0
5 * Copyright (C) 2013-14 Renesas Solutions Corp.
6 * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
9 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
25 stdout-path = "serial0:115200n8";
29 compatible = "mtd-rom";
31 bank-width = <4>;
32 device-width = <1>;
35 power-domains = <&cpg_clocks>;
37 #address-cells = <1>;
38 #size-cells = <1>;
41 compatible = "fixed-partitions";
42 #address-cells = <1>;
43 #size-cells = <1>;
58 compatible = "gpio-keys";
60 pinctrl-names = "default";
61 pinctrl-0 = <&keyboard_pins>;
63 key-1 {
64 /* JP3 must be set to 1-2 (default) */
65 interrupts-extended = <&irqc 6 IRQ_TYPE_EDGE_BOTH>;
68 wakeup-source;
75 compatible = "gpio-leds";
91 cvcc2: regulator-mmc {
92 compatible = "regulator-fixed";
93 regulator-name = "Cvcc2";
94 regulator-min-microvolt = <3300000>;
95 regulator-max-microvolt = <3300000>;
96 regulator-boot-on;
97 regulator-always-on;
103 compatible = "cfi-flash";
105 bank-width = <2>;
108 compatible = "fixed-partitions";
109 #address-cells = <1>;
110 #size-cells = <1>;
118 label = "uboot-env";
130 compatible = "cfi-flash";
132 bank-width = <2>;
135 compatible = "fixed-partitions";
136 #address-cells = <1>;
137 #size-cells = <1>;
145 label = "uboot-env1";
157 ðer {
158 pinctrl-names = "default";
159 pinctrl-0 = <ðer_pins>;
163 renesas,no-ether-link;
164 phy-handle = <&phy0>;
165 phy0: ethernet-phy@0 {
166 compatible = "ethernet-phy-idb824.2814",
167 "ethernet-phy-ieee802.3-c22";
173 clock-frequency = <13330000>;
178 clock-frequency = <400000>;
180 pinctrl-names = "default";
181 pinctrl-0 = <&i2c2_pins>;
191 pinctrl-0 = <&mmcif_pins>;
192 pinctrl-names = "default";
193 cd-gpios = <&port3 8 GPIO_ACTIVE_LOW>;
195 vmmc-supply = <&cvcc2>;
196 vqmmc-supply = <&cvcc2>;
197 bus-width = <8>;
214 ether_pins: ether {
279 clock-frequency = <32768>;
287 pinctrl-names = "default";
288 pinctrl-0 = <&scif2_pins>;
294 pinctrl-names = "default";
295 pinctrl-0 = <&sdhi0_pins>;
297 bus-width = <4>;
307 spi-max-frequency = <500000>;
308 #sound-dai-cells = <0>;
313 clock-frequency = <48000000>;
317 timeout-sec = <60>;