Lines Matching +full:standby +full:- +full:gpios
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * at91-sam9x75_curiosity.dts - Device Tree file for Microchip SAM9X75 Curiosity board
9 /dts-v1/;
11 #include <dt-bindings/input/input.h>
15 compatible = "microchip,sam9x75-curiosity", "microchip,sam9x7", "atmel,at91sam9";
22 stdout-path = "serial0:115200n8";
25 gpio-keys {
26 compatible = "gpio-keys";
27 pinctrl-names = "default";
28 pinctrl-0 = <&pinctrl_key_gpio_default>;
30 button-user {
32 gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
34 wakeup-source;
38 led-controller {
39 compatible = "gpio-leds";
41 led_red: led-red {
43 gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
44 pinctrl-0 = <&pinctrl_red_led_gpio_default>;
47 led_green: led-green {
49 gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
50 pinctrl-0 = <&pinctrl_green_led_gpio_default>;
53 led_blue: led-blue {
55 gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
56 pinctrl-0 = <&pinctrl_blue_led_gpio_default>;
57 linux,default-trigger = "heartbeat";
68 pinctrl-names = "default";
69 pinctrl-0 = <&pinctrl_classd_default>;
70 atmel,pwm-type = "diff";
71 atmel,non-overlap-time = <10>;
76 pinctrl-names = "default";
77 pinctrl-0 = <&pinctrl_dbgu_default>;
86 atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
91 pinctrl-names = "default";
92 pinctrl-0 = <&pinctrl_flx6_default>;
93 i2c-analog-filter;
94 i2c-digital-filter;
95 i2c-digital-filter-width-ns = <35>;
104 regulator-name = "VDD_IO";
105 regulator-min-microvolt = <3300000>;
106 regulator-max-microvolt = <3300000>;
107 regulator-initial-mode = <2>;
108 regulator-allowed-modes = <2>, <4>;
109 regulator-always-on;
111 regulator-state-standby {
112 regulator-on-in-suspend;
113 regulator-mode = <4>;
116 regulator-state-mem {
117 regulator-mode = <4>;
122 regulator-name = "VDD_DDR";
123 regulator-min-microvolt = <1350000>;
124 regulator-max-microvolt = <1350000>;
125 regulator-initial-mode = <2>;
126 regulator-allowed-modes = <2>, <4>;
127 regulator-always-on;
129 regulator-state-standby {
130 regulator-on-in-suspend;
131 regulator-mode = <4>;
134 regulator-state-mem {
135 regulator-on-in-suspend;
136 regulator-mode = <4>;
141 regulator-name = "VDD_CORE";
142 regulator-min-microvolt = <1150000>;
143 regulator-max-microvolt = <1150000>;
144 regulator-initial-mode = <2>;
145 regulator-allowed-modes = <2>, <4>;
146 regulator-always-on;
148 regulator-state-standby {
149 regulator-on-in-suspend;
150 regulator-mode = <4>;
153 regulator-state-mem {
154 regulator-mode = <4>;
159 regulator-name = "VDD_OTHER";
160 regulator-min-microvolt = <1150000>;
161 regulator-max-microvolt = <1150000>;
162 regulator-initial-mode = <2>;
163 regulator-allowed-modes = <2>, <4>;
164 regulator-ramp-delay = <3125>;
165 regulator-always-on;
167 regulator-state-standby {
168 regulator-on-in-suspend;
169 regulator-mode = <4>;
172 regulator-state-mem {
173 regulator-mode = <4>;
178 regulator-name = "LDO1";
179 regulator-min-microvolt = <3300000>;
180 regulator-max-microvolt = <3300000>;
181 regulator-always-on;
183 regulator-state-standby {
184 regulator-on-in-suspend;
189 regulator-name = "LDO2";
190 regulator-min-microvolt = <1800000>;
191 regulator-max-microvolt = <1800000>;
193 regulator-state-standby {
194 regulator-on-in-suspend;
202 atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
208 i2c-analog-filter;
209 i2c-digital-filter;
210 i2c-digital-filter-width-ns = <35>;
211 pinctrl-names = "default";
212 pinctrl-0 = <&pinctrl_flx7_default>;
215 power-monitor@10 {
218 #address-cells = <1>;
219 #size-cells = <0>;
223 shunt-resistor-micro-ohms = <10000>;
229 shunt-resistor-micro-ohms = <10000>;
235 shunt-resistor-micro-ohms = <10000>;
241 shunt-resistor-micro-ohms = <10000>;
248 pinctrl-names = "default";
249 pinctrl-0 = <&pinctrl_i2s_default>;
250 #sound-dai-cells = <0>;
255 clock-frequency = <24000000>;
260 pinctrl_classd_default: classd-default {
268 pinctrl_dbgu_default: dbgu-default {
275 pinctrl_flx6_default: flx6-default {
281 pinctrl_flx7_default: flx7-default {
288 gpio-keys {
289 pinctrl_key_gpio_default: key-gpio-default {
295 pinctrl_i2s_default: i2s-default {
305 led-controller {
306 pinctrl_red_led_gpio_default: red-led-gpio-default {
309 pinctrl_green_led_gpio_default: green-led-gpio-default {
312 pinctrl_blue_led_gpio_default: blue-led-gpio-default {
318 pinctrl_sdmmc0_default: sdmmc0-default {
331 debounce-delay-us = <976>;
340 atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
344 bus-width = <4>;
345 pinctrl-names = "default";
346 pinctrl-0 = <&pinctrl_sdmmc0_default>;
347 cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
348 disable-wp;
353 clock-frequency = <32768>;
358 compatible = "atmel,tcb-timer";
363 compatible = "atmel,tcb-timer";