Lines Matching +full:lpc +full:- +full:io +full:- +full:reg
1 // SPDX-License-Identifier: GPL-2.0+
2 #include <dt-bindings/clock/aspeed-clock.h>
7 #address-cells = <1>;
8 #size-cells = <1>;
9 interrupt-parent = <&vic>;
35 #address-cells = <1>;
36 #size-cells = <0>;
39 compatible = "arm,arm926ej-s";
41 reg = <0>;
47 reg = <0x40000000 0>;
51 compatible = "simple-bus";
52 #address-cells = <1>;
53 #size-cells = <1>;
57 reg = <0x1e620000 0x94>, <0x20000000 0x10000000>;
58 #address-cells = <1>;
59 #size-cells = <0>;
60 compatible = "aspeed,ast2400-fmc";
65 reg = < 0 >;
66 compatible = "jedec,spi-nor";
67 spi-rx-bus-width = <2>;
68 spi-max-frequency = <50000000>;
72 reg = < 1 >;
73 compatible = "jedec,spi-nor";
74 spi-rx-bus-width = <2>;
75 spi-max-frequency = <50000000>;
79 reg = < 2 >;
80 compatible = "jedec,spi-nor";
81 spi-rx-bus-width = <2>;
82 spi-max-frequency = <50000000>;
86 reg = < 3 >;
87 compatible = "jedec,spi-nor";
88 spi-rx-bus-width = <2>;
89 spi-max-frequency = <50000000>;
93 reg = < 4 >;
94 compatible = "jedec,spi-nor";
95 spi-rx-bus-width = <2>;
96 spi-max-frequency = <50000000>;
102 reg = <0x1e630000 0x18>, <0x30000000 0x10000000>;
103 #address-cells = <1>;
104 #size-cells = <0>;
105 compatible = "aspeed,ast2400-spi";
109 reg = < 0 >;
110 compatible = "jedec,spi-nor";
111 spi-max-frequency = <50000000>;
112 spi-rx-bus-width = <2>;
117 vic: interrupt-controller@1e6c0080 {
118 compatible = "aspeed,ast2400-vic";
119 interrupt-controller;
120 #interrupt-cells = <1>;
121 valid-sources = <0xffffffff 0x0007ffff>;
122 reg = <0x1e6c0080 0x80>;
125 cvic: interrupt-controller@1e6c2000 {
126 compatible = "aspeed,ast2400-cvic", "aspeed,cvic";
127 valid-sources = <0x7fffffff>;
128 reg = <0x1e6c2000 0x80>;
132 compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
133 reg = <0x1e660000 0x180>;
140 compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
141 reg = <0x1e680000 0x180>;
148 compatible = "aspeed,ast2400-ehci", "generic-ehci";
149 reg = <0x1e6a1000 0x100>;
152 pinctrl-names = "default";
153 pinctrl-0 = <&pinctrl_usb2h_default>;
158 compatible = "aspeed,ast2400-uhci", "generic-uhci";
159 reg = <0x1e6b0000 0x100>;
170 vhub: usb-vhub@1e6a0000 {
171 compatible = "aspeed,ast2400-usb-vhub";
172 reg = <0x1e6a0000 0x300>;
175 aspeed,vhub-downstream-ports = <5>;
176 aspeed,vhub-generic-endpoints = <15>;
177 pinctrl-names = "default";
178 pinctrl-0 = <&pinctrl_usb2d_default>;
183 compatible = "simple-bus";
184 #address-cells = <1>;
185 #size-cells = <1>;
189 compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
190 reg = <0x1e6e2000 0x1a8>;
191 #address-cells = <1>;
192 #size-cells = <1>;
194 #clock-cells = <1>;
195 #reset-cells = <1>;
197 p2a: p2a-control@2c {
198 reg = <0x2c 0x4>;
199 compatible = "aspeed,ast2400-p2a-ctrl";
203 silicon-id@7c {
204 compatible = "aspeed,ast2400-silicon-id", "aspeed,silicon-id";
205 reg = <0x7c 0x4>;
209 reg = <0x80 0x18>, <0xa0 0x10>;
210 compatible = "aspeed,ast2400-pinctrl";
216 reg = <0x1e6e2078 0x4>;
222 compatible = "aspeed,ast2400-adc";
223 reg = <0x1e6e9000 0xb0>;
226 #io-channel-cells = <1>;
231 compatible = "mmio-sram";
232 reg = <0x1e720000 0x8000>; // 32K
234 #address-cells = <1>;
235 #size-cells = <1>;
239 compatible = "aspeed,ast2400-video-engine";
240 reg = <0x1e700000 0x1000>;
243 clock-names = "vclk", "eclk";
248 sdmmc: sd-controller@1e740000 {
249 compatible = "aspeed,ast2400-sd-controller";
250 reg = <0x1e740000 0x100>;
251 #address-cells = <1>;
252 #size-cells = <1>;
258 compatible = "aspeed,ast2400-sdhci";
259 reg = <0x100 0x100>;
261 sdhci,auto-cmd12;
267 compatible = "aspeed,ast2400-sdhci";
268 reg = <0x200 0x100>;
270 sdhci,auto-cmd12;
277 #gpio-cells = <2>;
278 gpio-controller;
279 compatible = "aspeed,ast2400-gpio";
280 reg = <0x1e780000 0x1000>;
282 gpio-ranges = <&pinctrl 0 0 220>;
284 interrupt-controller;
285 #interrupt-cells = <2>;
290 compatible = "aspeed,ast2400-timer";
291 reg = <0x1e782000 0x90>;
294 clock-names = "PCLK";
298 compatible = "aspeed,ast2400-rtc";
299 reg = <0x1e781000 0x18>;
305 reg = <0x1e783000 0x20>;
306 reg-shift = <2>;
310 no-loopback-test;
316 reg = <0x1e784000 0x20>;
317 reg-shift = <2>;
320 no-loopback-test;
325 compatible = "aspeed,ast2400-wdt";
326 reg = <0x1e785000 0x1c>;
331 compatible = "aspeed,ast2400-wdt";
332 reg = <0x1e785020 0x1c>;
336 pwm_tacho: pwm-tacho-controller@1e786000 {
337 compatible = "aspeed,ast2400-pwm-tacho";
338 #address-cells = <1>;
339 #size-cells = <0>;
340 reg = <0x1e786000 0x1000>;
347 compatible = "aspeed,ast2400-vuart";
348 reg = <0x1e787000 0x40>;
349 reg-shift = <2>;
352 no-loopback-test;
356 lpc: lpc@1e789000 { label
357 compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon";
358 reg = <0x1e789000 0x1000>;
359 reg-io-width = <4>;
361 #address-cells = <1>;
362 #size-cells = <1>;
365 lpc_ctrl: lpc-ctrl@80 {
366 compatible = "aspeed,ast2400-lpc-ctrl";
367 reg = <0x80 0x10>;
372 lpc_snoop: lpc-snoop@90 {
373 compatible = "aspeed,ast2400-lpc-snoop";
374 reg = <0x90 0x8>;
381 compatible = "aspeed,ast2400-lhc";
382 reg = <0xa0 0x24 0xc8 0x8>;
385 lpc_reset: reset-controller@98 {
386 compatible = "aspeed,ast2400-lpc-reset";
387 reg = <0x98 0x4>;
388 #reset-cells = <1>;
392 compatible = "aspeed,ast2400-ibt-bmc";
393 reg = <0x140 0x18>;
399 uart_routing: uart-routing@9c {
400 compatible = "aspeed,ast2400-uart-routing";
401 reg = <0x9c 0x4>;
406 peci0: peci-controller@1e78b000 {
407 compatible = "aspeed,ast2400-peci";
408 reg = <0x1e78b000 0x60>;
412 cmd-timeout-ms = <1000>;
413 clock-frequency = <1000000>;
419 reg = <0x1e78d000 0x20>;
420 reg-shift = <2>;
424 no-loopback-test;
430 reg = <0x1e78e000 0x20>;
431 reg-shift = <2>;
435 no-loopback-test;
441 reg = <0x1e78f000 0x20>;
442 reg-shift = <2>;
446 no-loopback-test;
451 compatible = "simple-bus";
452 #address-cells = <1>;
453 #size-cells = <1>;
461 i2c_ic: interrupt-controller@0 {
462 #interrupt-cells = <1>;
463 compatible = "aspeed,ast2400-i2c-ic";
464 reg = <0x0 0x40>;
466 interrupt-controller;
470 #address-cells = <1>;
471 #size-cells = <0>;
473 reg = <0x40 0x40>;
474 compatible = "aspeed,ast2400-i2c-bus";
477 bus-frequency = <100000>;
479 interrupt-parent = <&i2c_ic>;
485 #address-cells = <1>;
486 #size-cells = <0>;
488 reg = <0x80 0x40>;
489 compatible = "aspeed,ast2400-i2c-bus";
492 bus-frequency = <100000>;
494 interrupt-parent = <&i2c_ic>;
500 #address-cells = <1>;
501 #size-cells = <0>;
503 reg = <0xc0 0x40>;
504 compatible = "aspeed,ast2400-i2c-bus";
507 bus-frequency = <100000>;
509 interrupt-parent = <&i2c_ic>;
510 pinctrl-names = "default";
511 pinctrl-0 = <&pinctrl_i2c3_default>;
516 #address-cells = <1>;
517 #size-cells = <0>;
519 reg = <0x100 0x40>;
520 compatible = "aspeed,ast2400-i2c-bus";
523 bus-frequency = <100000>;
525 interrupt-parent = <&i2c_ic>;
526 pinctrl-names = "default";
527 pinctrl-0 = <&pinctrl_i2c4_default>;
532 #address-cells = <1>;
533 #size-cells = <0>;
535 reg = <0x140 0x40>;
536 compatible = "aspeed,ast2400-i2c-bus";
539 bus-frequency = <100000>;
541 interrupt-parent = <&i2c_ic>;
542 pinctrl-names = "default";
543 pinctrl-0 = <&pinctrl_i2c5_default>;
548 #address-cells = <1>;
549 #size-cells = <0>;
551 reg = <0x180 0x40>;
552 compatible = "aspeed,ast2400-i2c-bus";
555 bus-frequency = <100000>;
557 interrupt-parent = <&i2c_ic>;
558 pinctrl-names = "default";
559 pinctrl-0 = <&pinctrl_i2c6_default>;
564 #address-cells = <1>;
565 #size-cells = <0>;
567 reg = <0x1c0 0x40>;
568 compatible = "aspeed,ast2400-i2c-bus";
571 bus-frequency = <100000>;
573 interrupt-parent = <&i2c_ic>;
574 pinctrl-names = "default";
575 pinctrl-0 = <&pinctrl_i2c7_default>;
580 #address-cells = <1>;
581 #size-cells = <0>;
583 reg = <0x300 0x40>;
584 compatible = "aspeed,ast2400-i2c-bus";
587 bus-frequency = <100000>;
589 interrupt-parent = <&i2c_ic>;
590 pinctrl-names = "default";
591 pinctrl-0 = <&pinctrl_i2c8_default>;
596 #address-cells = <1>;
597 #size-cells = <0>;
599 reg = <0x340 0x40>;
600 compatible = "aspeed,ast2400-i2c-bus";
603 bus-frequency = <100000>;
605 interrupt-parent = <&i2c_ic>;
606 pinctrl-names = "default";
607 pinctrl-0 = <&pinctrl_i2c9_default>;
612 #address-cells = <1>;
613 #size-cells = <0>;
615 reg = <0x380 0x40>;
616 compatible = "aspeed,ast2400-i2c-bus";
619 bus-frequency = <100000>;
621 interrupt-parent = <&i2c_ic>;
622 pinctrl-names = "default";
623 pinctrl-0 = <&pinctrl_i2c10_default>;
628 #address-cells = <1>;
629 #size-cells = <0>;
631 reg = <0x3c0 0x40>;
632 compatible = "aspeed,ast2400-i2c-bus";
635 bus-frequency = <100000>;
637 interrupt-parent = <&i2c_ic>;
638 pinctrl-names = "default";
639 pinctrl-0 = <&pinctrl_i2c11_default>;
644 #address-cells = <1>;
645 #size-cells = <0>;
647 reg = <0x400 0x40>;
648 compatible = "aspeed,ast2400-i2c-bus";
651 bus-frequency = <100000>;
653 interrupt-parent = <&i2c_ic>;
654 pinctrl-names = "default";
655 pinctrl-0 = <&pinctrl_i2c12_default>;
660 #address-cells = <1>;
661 #size-cells = <0>;
663 reg = <0x440 0x40>;
664 compatible = "aspeed,ast2400-i2c-bus";
667 bus-frequency = <100000>;
669 interrupt-parent = <&i2c_ic>;
670 pinctrl-names = "default";
671 pinctrl-0 = <&pinctrl_i2c13_default>;
676 #address-cells = <1>;
677 #size-cells = <0>;
679 reg = <0x480 0x40>;
680 compatible = "aspeed,ast2400-i2c-bus";
683 bus-frequency = <100000>;
685 interrupt-parent = <&i2c_ic>;
686 pinctrl-names = "default";
687 pinctrl-0 = <&pinctrl_i2c14_default>;