Lines Matching +full:line +full:- +full:based
7 * Maxim ds18*20 based temperature sensors.
8 * Maxim ds1825 based temperature sensors.
16 -----------
33 lines of ASCII output. The first line contains the nine hex bytes
35 If the crc matched the returned values are retained. The second line
46 in the module), it will drive the line high during the longer conversion
47 time required by parasited powered device on the line. Reading
49 -1 if at least one sensor still in conversion, 1 if conversion is complete
72 the sensor. Resolution is reset when the sensor gets power-cycled.
81 Some non-genuine DS18B20 chips are fixed in 12-bit mode only, so the actual
86 The write-only sysfs entry ``eeprom_cmd`` is an alternative for EEPROM operations.
94 Values shall be space separated and in the device range (typical -55 degC
106 be force-enabled.
118 location of the chip in the 1-wire bus without needing pre-existing
120 ``w1_seq``. The file will contain a single line with an integer value
124 Insufficient power in parasite mode, line noise and insufficient conversion
133 Documentation/ABI/testing/sysfs-driver-w1_therm
136 compatible with DS18B20. Added are lowest 2\ :sup:`-5`, 2\ :sup:`-6` temperature
138 resolutions. The device is powered up in 14-bit resolution mode. The conversion
144 indicating 15, but the device is always operating in 14-bit resolution mode.