Lines Matching full:firmware
17 working, DO NOT ATTEMPT TO USE FIRMWARE AND SETTINGS FROM ANOTHER LAPTOP,
44 Firmware chapter
47 The amplifier is controlled and managed by firmware running on the internal
48 DSP. Firmware files are essential to enable the full capabilities of the
51 Firmware is distributed in the linux-firmware repository:
52 https://gitlab.com/kernel-firmware/linux-firmware.git
65 the firmware is *mandatory* to enable receiving the audio from the CS42L43.
67 On HDA systems the firmware is *mandatory* to enable HDA bridge mode. There
68 will not be any audio from the amplifiers without firmware.
70 Cirrus Logic firmware files
73 Each amplifier requires two firmware files. One file has a .wmfw suffix, the
76 The firmware is customized by the OEM to match the hardware of each laptop,
77 and the firmware is specific to that laptop. Because of this, there are many
78 firmware files in linux-firmware for these amplifiers. Firmware files are
81 Cirrus Logic submits files for known laptops to the upstream linux-firmware
83 permission from the manufacturer to publish the firmware, it will be pushed
84 to linux-firmware. You may need to upgrade to a newer release of
85 linux-firmware to obtain the firmware for your laptop.
87 **Important:** the Makefile for linux-firmware creates symlinks that are listed
89 able to load the firmware.
91 How do I know which firmware file I should have?
93 All firmware file names are qualified with a unique "system ID". On normal
105 The format of the firmware file names is:
117 * spkidX is an optional part, used for laptops that have firmware
120 Sound Open Firmware and ALSA topology files
123 All SoundWire systems will require a Sound Open Firmware (SOF) for the
126 The SOF firmware will usually be provided by the manufacturer of the host
127 CPU (i.e. Intel or AMD). The .tplg file is normally part of the SOF firmware
159 …[ 9.991709] cs35l56 sdw:0:0:01fa:3556:01:0: DSP1: Firmware: 1a00d6 vendor: 0x2 v3.11.23, 41 algori…
174 …[ 9.984335] cs35l56-hda i2c-CSC3556:00-cs35l56-hda.0: DSP1: Firmware: 1a00d6 vendor: 0x2 v3.11.23,…
187 reset and is running default ROM firmware.
188 * (patched=1) means that something has previously downloaded firmware
190 signal to be able to replace this preloaded firmware. This is normal
191 for systems where the BIOS downloads firmware to the amplifiers
199 Shows that a .wmfw firmware file was found and downloaded.
202 Shows that a .bin firmware file was found and downloaded.
212 The version of the .bin file content does not match the loaded firmware.
217 The version of the .bin file content does not match the loaded firmware.
224 Calibration disabled due to missing firmware controls
225 Driver was not able to write EFI calibration data to firmware registers.
229 * The amplifier has already been patched with firmware by something
231 to be able to reset the amplifier and download the firmware files it
236 Same meaning and cause as "Calibration disabled due to missing firmware
292 by using firmware that does not match the hardware.