Lines Matching +full:digital +full:- +full:output
19 (index 0) for a given card) allows to forward 48kHz, stereo, 16-bit
20 little endian streams without any modifications to the digital output
22 to 8 raw PCM devices operating at 48kHz, 16-bit little endian. It would
24 but the conversion routines exist only for stereo (2-channel streams)
30 Digital mixer controls
34 functionality. Only the default built-in code in the ALSA driver is described
44 digital to analog converter
46 analog to digital converter
48 one-way three wire serial bus for digital sound by Philips Semiconductors
56 FX-bus
58 Each of the synthesizer voices can feed its output to these accumulators
63 ---------------------------------------
64 This control is used to attenuate samples from left and right PCM FX-bus
69 ------------------------------------------------
70 This control is used to attenuate samples from left and right PCM FX-bus
76 ----------------------------------------------
77 This control is used to attenuate samples from left and right PCM FX-bus
83 -------------------------------------------
84 This control is used to attenuate samples from left and right PCM FX-bus
90 ------------------------------------------------------------------------------
91 These controls are used to attenuate samples from left and right PCM FX-bus
97 ----------------------------------------
98 This control is used to attenuate samples from left and right MIDI FX-bus
103 --------------------------------------------------------------------------------
104 These controls are used to attenuate samples from left and right MIDI FX-bus
110 -------------------------------------------
111 This control is used to attenuate samples from left and right rear PCM FX-bus
117 --------------------------------------------------------------------------------------
118 These controls are used to attenuate samples from left and right rear PCM FX-bus
124 -----------------------------------------
125 This control is used to attenuate sample for center PCM FX-bus accumulator.
130 --------------------------------------
131 This control is used to attenuate sample for center PCM FX-bus accumulator.
136 ---------------------------------------
143 a digital loopback is activated.
147 --------------------------------------
157 ---------------------------------------------
159 digital inputs (usually used by a CDROM drive). The result samples are
163 --------------------------------------------
165 digital inputs (usually used by a CDROM drive). The result samples are
169 ---------------------------------------------
171 digital inputs (usually used by a CDROM drive). The result samples are
175 --------------------------------------------
177 digital inputs (usually used by a CDROM drive). The result samples are
181 ---------------------------------------------------
183 digital input. The result samples are forwarded to the front DAC PCM slots
187 --------------------------------------------------
189 digital inputs. The result samples are forwarded to the ADC capture FIFO
193 -------------------------------------------------
195 digital inputs. The result samples are forwarded to the front DAC PCM slots
199 ------------------------------------------------
201 digital inputs. The result samples are forwarded to the ADC capture FIFO
205 ----------------------------------------------------------------------------------------------------
211 --------------------------------------------------------------------------------------------------
216 ``name='Tone Control - Switch',index=0``
217 ----------------------------------------
221 ``name='Tone Control - Bass',index=0``
222 --------------------------------------
227 ``name='Tone Control - Treble',index=0``
228 ----------------------------------------
234 -----------------------------------------------------
235 If this switch is on, then the samples for the IEC958 (S/PDIF) digital
236 output are taken only from the raw FX8010 PCM, otherwise standard front
240 --------------------------------------------
241 This control attenuates the samples for the headphone output.
244 ---------------------------------------------------
246 left headphone output (useful for SB Live cards without separate center/LFE
247 output).
250 ------------------------------------------------
252 right headphone output (useful for SB Live cards without separate center/LFE
253 output).
259 ``name='EMU10K1 PCM Volume',index 0-31``
260 ----------------------------------------
261 Channel volume attenuation in range 0-0x1fffd. The middle value (no
265 * 0 - mono, default 0xffff (no attenuation)
266 * 1 - left, default 0xffff (no attenuation)
267 * 2 - right, default 0xffff (no attenuation)
269 ``name='EMU10K1 PCM Send Routing',index 0-31``
270 ----------------------------------------------
271 This control specifies the destination - FX-bus accumulators. There are
274 * 0 - mono, A destination (FX-bus 0-15), default 0
275 * 1 - mono, B destination (FX-bus 0-15), default 1
276 * 2 - mono, C destination (FX-bus 0-15), default 2
277 * 3 - mono, D destination (FX-bus 0-15), default 3
278 * 4 - left, A destination (FX-bus 0-15), default 0
279 * 5 - left, B destination (FX-bus 0-15), default 1
280 * 6 - left, C destination (FX-bus 0-15), default 2
281 * 7 - left, D destination (FX-bus 0-15), default 3
282 * 8 - right, A destination (FX-bus 0-15), default 0
283 * 9 - right, B destination (FX-bus 0-15), default 1
284 * 10 - right, C destination (FX-bus 0-15), default 2
285 * 11 - right, D destination (FX-bus 0-15), default 3
287 Don't forget that it's illegal to assign a channel to the same FX-bus accumulator
290 ``name='EMU10K1 PCM Send Volume',index 0-31``
291 ---------------------------------------------
292 It specifies the attenuation (amount) for given destination in range 0-255.
295 * 0 - mono, A destination attn, default 255 (no attenuation)
296 * 1 - mono, B destination attn, default 255 (no attenuation)
297 * 2 - mono, C destination attn, default 0 (mute)
298 * 3 - mono, D destination attn, default 0 (mute)
299 * 4 - left, A destination attn, default 255 (no attenuation)
300 * 5 - left, B destination attn, default 0 (mute)
301 * 6 - left, C destination attn, default 0 (mute)
302 * 7 - left, D destination attn, default 0 (mute)
303 * 8 - right, A destination attn, default 0 (mute)
304 * 9 - right, B destination attn, default 255 (no attenuation)
305 * 10 - right, C destination attn, default 0 (mute)
306 * 11 - right, D destination attn, default 0 (mute)
314 -------------------------------------
322 The EMU10K1 Digital Audio Processor
324 FX8010 - A DSP Chip Architecture for Audio Effects
328 ------------
343 -----------------------------------
346 Digital Sampling Instrument employing cache memory (Jul. 20, 1999)
351 digital sound samples can be concurrently loaded