Lines Matching full:notes
325 * Notes: This call is usually performed internally during a scsi
348 * Notes: Only required in "hotplug initialization model" after a
371 * Notes: Can be invoked any time on a SCSI device controlled by this
375 * Defined in: drivers/scsi/scsi.c [see source code for more notes]
389 * Notes: Caller owns memory returned (free with kfree() )
405 * Notes: There is no timer nor any other means by which the requests
424 * Notes: When this call returns to the LLD, the SCSI bus scan on
446 * Notes: Actually increments the counts in two sub-objects
461 * Notes: Actually decrements the counts in two sub-objects. If the
480 * Notes: If an LLD becomes aware that a scsi device (lu) has
499 * Notes: Should only be invoked if the "hotplug initialization
517 * Notes: This only needs to be called if the reset is one which
534 * Notes: Should be called after scsi_add_host()
556 * Notes: LLDs may call this at any time and we will do "The Right
639 * Notes: an arbitrary geometry (based on READ CAPACITY) is used
666 * Notes: This is to give the LLD an opportunity to do local recovery.
686 * Notes: This is called only for a command that has timed out.
703 * Notes: Invoked from scsi_eh thread. No other commands will be
721 * Notes: Invoked from scsi_eh thread. No other commands will be
739 * Notes: Invoked from scsi_eh thread. No other commands will be
764 * Notes: Often supplies PCI or ISA information such as IO addresses
793 * Notes: The SCSI subsystem uses a "trickle down" ioctl model.
828 * Notes: Driven from scsi_proc.c which interfaces to proc_fs. proc_fs
889 * Notes: This function should be relatively fast. Normally it
921 * Notes: Allows the driver to allocate any resources for a device
948 * Notes: Allows the driver to inspect the response to the initial
968 * Notes: Mid level structures for given device are still in place