Lines Matching full:adapters

28 host adapters which share a common programming interface across a diverse
34 This driver supports all present BusLogic MultiMaster Host Adapters, and should
36 recently, BusLogic introduced the FlashPoint Host Adapters, which are less
38 Despite not having an onboard CPU, the FlashPoint Host Adapters perform very
43 analogous to the firmware on the MultiMaster Host Adapters.  Thanks to their
45 Adapters as well.
48 to achieve the full performance that BusLogic SCSI Host Adapters and modern
55 The latest information on Linux support for BusLogic SCSI Host Adapters, as
73 adapters that have been well tested with Linux even before being brought to
86 "Mylex SCSI host adapters are compatible with all major operating systems
146   BusLogic SCSI Host Adapters directly implement SCSI-2 Tagged Queuing, and so
211   Adapters may share the same interrupt request channel.
214 Supported Host Adapters
217 The following list comprises the supported BusLogic SCSI Host Adapters as of
222 FlashPoint Series PCI Host Adapters:
236 MultiMaster "W" Series Host Adapters:
244 MultiMaster "C" Series Host Adapters:
256 MultiMaster "S" Series Host Adapters:
267 MultiMaster "A" Series Host Adapters:
273 AMI FastDisk Host Adapters that are true BusLogic MultiMaster clones are also
276 BusLogic SCSI Host Adapters are available packaged both as bare boards and as
289   FlashPoint Host Adapters now include RAIDPlus, Mylex's bootable software
301   FlashPoint Host Adapters ship with their configuration set to "Factory
303   to be negotiated.  This results in fewer problems when these host adapters
316 The BT-948/958/958D PCI Ultra SCSI Host Adapters have some features which may
325   that previous BusLogic SCSI Host Adapters respond to.  This driver supports
343   In systems with multiple BusLogic PCI Host Adapters, the order in which the
348   host adapters in the same order.  The motherboard's PCI BIOS provides a
349   standard way of enumerating the PCI host adapters, which is used by the Linux
358   factory default settings of the BT-948/958/958D enumerate the host adapters
365   so as to recognize the host adapters in the same order as they are enumerated
373   negotiated.  This results in fewer problems when these host adapters are
388 for multiple host adapters may be specified either by separating the option
392 adapters whereas the remaining options apply individually only to the
400   Adapters will be detected.
405   Space and therefore only ISA Multimaster Host Adapters will be detected, as
406   well as PCI Multimaster Host Adapters that have their ISA Compatible I/O
411   The "NoSortPCI" option forces PCI MultiMaster Host Adapters to be
417   The "MultiMasterFirst" option forces MultiMaster Host Adapters to be probed
418   before FlashPoint Host Adapters.  By default, if both FlashPoint and PCI
419   MultiMaster Host Adapters are present, this driver will probe for
420   FlashPoint Host Adapters first unless the BIOS primary disk is controlled
422   Adapters will be probed first.
426   The "FlashPointFirst" option forces FlashPoint Host Adapters to be probed
427   before MultiMaster Host Adapters.
499   Adapters.  This may be necessary with some older Target Devices that do not
579 for BusLogic SCSI Host Adapters.  To join the mailing list, send a message to