Lines Matching full:database

770 of them are active at the same time. An address database is the subset (partition)
772 lookup on TX) depending on the state of the port. An address database may
778 database associated by the driver with that bridge (and not with other
785 associated with a different address database).
788 associated address database, which is shared by all ports which are members of
792 In this context, a VLAN-unaware database means that all packets are expected to
794 VLAN-aware database means that packets are supposed to match based on the VLAN
806 use a separate database called a port private database. This is different from
812 database should be empty in a naive implementation, and in this case, all
816 multiple address databases, and the database that a packet should be associated
819 classified by hardware in one address database), and from a bridge port (which
820 were classified to a different address database).
833   associated with the port private database of the respective user port,
839   with the port private database of the respective user port.
843   and not forwarded. They are associated with the address database for that
848   associated with the address database for that bridge.
852   is set to true by the driver. These are associated with the address database
859   the port private database of user port ``db->dp``.
861   ``db->bridge``. Separation between the VLAN-unaware database and the per-VID
863 - ``DSA_DB_LAG``: the entry belongs to the address database of LAG ``db->lag``.
886 share the same database, but the reference counting of host-filtered addresses
937 driver for its VLAN-unaware address database associated with that bridge.
1002   Forwarding Database entry, the switch hardware should be programmed with the
1003   specified address in the specified VLAN Id in the forwarding database
1007   Forwarding Database entry, the switch hardware should be programmed to delete
1009   this port forwarding database
1014   a means to view the entries visible on user ports in the hardware database.
1019   a multicast database entry. The switch hardware should be programmed with the
1020   specified address in the specified VLAN ID in the forwarding database
1024   multicast database entry, the switch hardware should be programmed to delete
1026   this port forwarding database.